# NEED HELP!!! **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [November 24, 2012, 12:54am UTC](https://forums.yoyoexpert.com/t/need-help/45623 "2012-11-24T00:54:21Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [November 24, 2012, 12:54am UTC](https://forums.yoyoexpert.com/t/need-help/45623/1 "2012-11-24T00:54:21Z")
I have been working with wood lately trying to figure out how to make a nice take apart wood and every thing I try gets a extreme vibe and I was wondering if you guys know / has ideas of what will work ---
**Author:** ![DrAwesome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/drawesome/32/1139_2.png) [@DrAwesome](https://forums.yoyoexpert.com/u/DrAwesome)\ **Post date:** [November 24, 2012, 1:57am UTC](https://forums.yoyoexpert.com/t/need-help/45623/2 "2012-11-24T01:57:13Z")
If you contact tmbr they may be able to give you some good tips. Also you could pm Ed he is a nice guy and has been throwing wood for a while. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [November 24, 2012, 2:17am UTC](https://forums.yoyoexpert.com/t/need-help/45623/3 "2012-11-24T02:17:48Z")
Yeah I was going to ask Ed since we go to the same club ---
**Author:** ![DrAwesome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/drawesome/32/1139_2.png) [@DrAwesome](https://forums.yoyoexpert.com/u/DrAwesome)\ **Post date:** [November 24, 2012, 2:20am UTC](https://forums.yoyoexpert.com/t/need-help/45623/4 "2012-11-24T02:20:29Z")
> [@yoyoexpertman54](#): > > Yeah I was going to ask Ed since we go to the same club cool ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [November 25, 2012, 2:02pm UTC](https://forums.yoyoexpert.com/t/need-help/45623/5 "2012-11-25T14:02:40Z")
sides could be unevenly cut. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [November 30, 2012, 1:04am UTC](https://forums.yoyoexpert.com/t/need-help/45623/6 "2012-11-30T01:04:24Z")
> [@Bcmaddog](#): > > sides could be unevenly cut. they are not because I use a caliper to measure the width and length ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [November 30, 2012, 2:16am UTC](https://forums.yoyoexpert.com/t/need-help/45623/7 "2012-11-30T02:16:55Z")
I don’t make yoyos but from what I’ve seen the axle/hub area is probably the most critical area regarding vibe and wobble. That is more than likely where your problem lies. It doesn’t take much being off center or misaligned to cause a problem. ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [November 30, 2012, 10:33pm UTC](https://forums.yoyoexpert.com/t/need-help/45623/8 "2012-11-30T22:33:23Z")
Inconsistencies within each half is going to be your biggest problem. Halves that don’t quite match each other is a secondary problem: not as big of a deal, but it can exasperate other issues so it’s worth being careful. The bearing seat is absolutely the most critical cut you will make. If you are cutting it yourself, you will need a metal lathe to get the accuracy needed. If you are using a spacer kit (such as YYF’s or Crucial’s) you could do it on a wood lathe, but again, you will have to be very careful to make sure it fits snugly and is level. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [January 10, 2013, 11:57am UTC](https://forums.yoyoexpert.com/t/need-help/45623/9 "2013-01-10T11:57:05Z")
I figured it out I just bought grease fittings and tapped the inner circle and they just screw in to the yoyo