# My heavily modded dash

**URL:** <https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440>\
**Category:** Display Case\
**Created:** [October 29, 2010, 2:42am UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440 "2010-10-29T02:42:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![arem250](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/arem250/32/7922_2.png) [@arem250](https://forums.yoyoexpert.com/u/arem250)\
**Post date:** [October 29, 2010, 2:42am UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440/1 "2010-10-29T02:42:39Z")

</div>

I put a satin finish on it, ground down the lip on the spacer so I could use a regular size C bearing in it, and put a longer axle in it. Works good, but is a little loud. Tell me what you think. The bearing seat looks ugly because of what type of metal it is made out of.

 ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/c/5/cc571b285e83cb882893e5b3529ac5af72c25fad.jpeg)  

 ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/0/a/40a0feba9dcfeaf88dd8ce48fb79e98e9cb562f0.jpeg)  

 ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/e/f/7efff32248ba808609bc6faa425deb48ac77bb1b.jpeg)

---

<div class="post-metadata">

**Author:** ![YoyoMango](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyomango/32/580_2.png) [@YoyoMango](https://forums.yoyoexpert.com/u/YoyoMango)\
**Post date:** [October 29, 2010, 3:06am UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440/2 "2010-10-29T03:06:14Z")

</div>

yomega bearing seats are crap.

---

<div class="post-metadata">

**Author:** ![justink1025](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@justink1025](https://forums.yoyoexpert.com/u/justink1025)\
**Post date:** [October 30, 2010, 7:59pm UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440/3 "2010-10-30T19:59:35Z")

</div>

You grinded the bearing seat…??

---

<div class="post-metadata">

**Author:** ![arem250](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/arem250/32/7922_2.png) [@arem250](https://forums.yoyoexpert.com/u/arem250)\
**Post date:** [October 30, 2010, 8:22pm UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440/4 "2010-10-30T20:22:39Z")

</div>

> [@Justin the JeeJaw](#):
>
> You grinded the bearing seat…??

There was a small lip on the outside edge that I ground down with a bench grinder. The small lip was preventing a normal size C bearing.

---

<div class="post-metadata">

**Author:** ![fatjoe298](https://avatars.discourse-cdn.com/v4/letter/f/bbce88/32.png) [@fatjoe298](https://forums.yoyoexpert.com/u/fatjoe298)\
**Post date:** [November 4, 2010, 4:20pm UTC](https://forums.yoyoexpert.com/t/my-heavily-modded-dash/20440/5 "2010-11-04T16:20:12Z")

</div>

great job on the Satin…but you couldn’t have siliconed it?