# Modded Freehand Pro **URL:** https://forums.yoyoexpert.com/t/modded-freehand-pro/338191 **Category:** Yo-Yo Mods and Maintenance **Created:** [May 7, 2021, 12:05am UTC](https://forums.yoyoexpert.com/t/modded-freehand-pro/338191 "2021-05-07T00:05:12Z") **Posts on this page:** 1 **Page:** 1
### Author: ![YotaroKuyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yotarokuyo/32/123850_2.png) [@YotaroKuyo](https://forums.yoyoexpert.com/u/YotaroKuyo) #### Post date: [May 7, 2021, 12:05am UTC](https://forums.yoyoexpert.com/t/modded-freehand-pro/338191/1 "2021-05-07T00:05:13Z")
What’s up fellow yoyoers! Thought I would share this simple mod I did recently! I saw this on Throws N’ Brews’ youtube channel I pretty much just followed his tutorial exactly but I added one thing. I’m not sure if it’s an original idea or not, I could see someone having done this to a Freehand Zero back in the 2000s. My addition to the mod, because I don’t like the look of the black axle stickers, was to put some epoxy resin over the outside of the axle to keep the parts in and I added some gold flakes to match the weight rings. I wasn’t sure how this would work and I had a number of concerns but it’s a cheap yoyo so I just went for it. It worked great! The bolt side is really smooth and good looking, the nut side has a little raised bump from where the axle is but overall I’m happy with the results. ![20210502_120600](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/0/3/b03b30d9ba0f86105e78389be7e890063a6762e0.jpeg) ![20210502_120640](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/9/0/c9038d5b0e7f16d217578ae77edcb17f74712bd4.jpeg) ![20210502_120626](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/d/d/7dd10c70ff8f2942e46356aadbd3f3098d532204.jpeg) It has a little bit of vibe, I think from the weight rings, it had it after I installed the rings before I applied the epoxy. It’s not enough to be an issue for me though. What do you think?