MB's Powder Thread! Come & see the power of powder!

Hmm I hadn’t considered masking. Can you post a gut shot?

Here ya go…


1 Like

Ooooh my bad, I thought you were talking about masking near the bearing seat, like where you mask with abrasive blasts. I didn’t read close enough :stuck_out_tongue:

Thanks, though.

The key to satisfaction is thorough research my friend.

I don’t mess with the bearing seat or response area. I have blasted them before and only lightly and quickly at that. Don’t like taking chances.

These look great! Do you need the yoyo stripped before you receive it?

Awesome job!

The job you did on the C3 DiBase looks amazing!

1 Like

I’ve been wondering. Is it possible to grind with a powder coated yoyo? I’ve never held one so I am a little clueless as far as that.

The powder needs to applied to bare metal. Polished is recommended and is a must for the translucents. But metallics and base colors can be applied over a raw finish.

I can strip via blast and do a polish if needed.

The powder coat is pretty smooth and does not really make for grinding. The DiBase I recently did has some texture to it due to the large amount of flake added to the clear coat. So it may grind a little better.

1 Like

Hey folks just finished the winner of the “Pick the next Powder poll”.

Did a Glow Powder coat on a ILYY Void. Has a polished gap and blasted hub. Did this mainly to see what would work the best with the glow powder. The glow is a little tricky and has a few drawbacks as far as application, but I can say that it glows amazing.

Big problem is I can’t take pictures of it while it’s glowing!! Doesn’t seem to show up. After talking to GlowDoug about it a while back he said there where some techniques that his camera guy used that help accentuate the glow properties in the pictures. I have a local friend that may be able to help but it will be a bit before I can get to him about it.

Till then you’ll all have to wait in limbo.

PS, the runner up in the poll was the candy raspberry with gold flake. He’s next and should be ready by the end of the weekend.

1 Like

Sometimes I even amaze myself, now I’m a photographer. :o Well not really but by accident I stumbled onto something today. Figured I was just going to post some of the pics of the ILYY Void I did while it was sunny and you guys would be able to see what it looks like under non glow conditions. After taking them I went back into the garage and holy $#@& this thing was glowing like it was radiated only it was blue instead of the aqua. I guess the direct sunlight gives it a blue hue instead of the artificial light and the agua from last night.

Anyway I’m pretty pleased overall with it. Has a little vibe and the glow is patchy in a few spots but it really really glows nice and that’s what I was after. The rest of the stuff I can fine tune out later. So I figured out how to get a few pics of it while it was glowing. These are pics of it charged from sunlight. Gonna do a few from natural light tonight. Pics aren’t the best but I think they get it done.


Duh here are the pics of what it looks like not glowing. Blasted hubs and polished gap has agua glow powder in a super gloss clear powder coat.


Very cool.

If you haven’t yet, try putting that Void under a blacklight. It’ll charge instantly and glow quite brightly.

Can you do different color glows?

Oh, btw, that’s sick!

1 Like

Yes. Next is violet.

That looks great.

1 Like

Thanks man.

A TP Maxbet with a clear metallic/black metallic pc on it.


TP Maxbet in motion


1 Like

Oh my God that looks incredible. Can’t wait to see what it looks like in person! ;D

Great work, man.

1 Like