# Magnetic Yoyo Bearing?

**URL:** https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265
**Category:** General Yo-Yo
**Created:** [September 17, 2020, 9:21pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265 "2020-09-17T21:21:40Z")
**Posts on this page:** 10
**Page:** 1

<div class="post-metadata">

### Author: ![NoT\_ATHROWER](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/not_athrower/32/14242_2.png) [@NoT\_ATHROWER](https://forums.yoyoexpert.com/u/NoT_ATHROWER)
#### Post date: [September 17, 2020, 9:21pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/1 "2020-09-17T21:21:40Z")

</div>

Has any company or anyone ever tried to create a magnetic bearing where the rings are suspended in mid-air using neodymium magnets or any other super strong magnet? I feel, like if something like this were to become a reality, yoyo-ing would be revolutionized once again.

---

<div class="post-metadata">

### Author: ![HappyHands](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/happyhands/32/93016_2.png) [@HappyHands](https://forums.yoyoexpert.com/u/HappyHands)
#### Post date: [September 17, 2020, 9:41pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/2 "2020-09-17T21:41:37Z")

</div>

I don’t know what you are saying on a technical level, but it sounds bloody awesome.

---

<div class="post-metadata">

### Author: ![yoyodoc](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyodoc/32/48820_2.png) [@yoyodoc](https://forums.yoyoexpert.com/u/yoyodoc)
#### Post date: [September 17, 2020, 9:42pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/3 "2020-09-17T21:42:56Z")

</div>

People have been talking about that on and off for literally a few decades.

And now here we are, you’re talking about it.

Your post will most likely get a short list of various responses.

Either imaginative statements sprinkled with positivity. Or slightly less enthusiastic responses with no appreciable level of emotional input.

Personally I think it’s a cool idea.

Realistically you would really have to get together with somebody that thinks way more at a higher ‘what can be done with magnetism’ level.

And if you stick around for a few years you’ll see one of two things.

Either a post from somebody saying check this out I did it.

Or somebody asking the same question you did and you’ll read it and say hey I just said that a couple years ago ha ha.

And we all move on down the road yoyoing all the way and thinking of magnets…:thinking:

---

<div class="post-metadata">

### Author: ![Onefanatic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/onefanatic/32/101281_2.png) [@Onefanatic](https://forums.yoyoexpert.com/u/Onefanatic)
#### Post date: [September 17, 2020, 10:08pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/4 "2020-09-17T22:08:55Z")

</div>

I would pay $50-$60 for a magnetic bearing. I have personally thought about this a lot, and I completely agree with you. The advantages would be immense! For one, you would never have to lubricate it. Two, it would spin up to 4-5 times longer. And three, you wouldn’t need as much weight on the yoyo as you usually do, because of the potential spin time, and therefore you could make yo-yos that weigh 3/4 of the yo-yos today. The only thing that concerns me, is that it would have to be extremely tuned, and experimentally made. You would not be able to put to much magnet on the bearing wall or it would put to much strain on the outer shell, and crack over time. On the other hand, if you put to little magnet on the wall, it would not have enough force to resist the initial impact of the throw, and would bounce. Potentially wrecking your throw, trick, and string. Another thing that comes into play is how on earth you plan on keeping the outer shell connected on the same plane as the inner. I don’t think that this is a very common thing for those reasons, but once the world has the means to create these magnet bearings, I will personally make sure they get on yo-yos.

---

<div class="post-metadata">

### Author: ![Exmime](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/exmime/32/40143_2.png) [@Exmime](https://forums.yoyoexpert.com/u/Exmime)
#### Post date: [September 18, 2020, 1:24am UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/5 "2020-09-18T01:24:03Z")

</div>

This was taken from the [Copy of Bens Peak History Thread](https://forums.yoyoexpert.com/t/copy-of-bens-peak-history-thread/59753)

 ![Proto%20Peak%20Specs](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/4/f/74fae865d4c049a9ca30e57c7bd707b01641bbcd.jpeg)

The Peak bearing spec was an ABEC 9 designed for Dentistry tools. To most YoYoers its was just a Flat C Bearing. I’m sure there are some exotic bearings out there for advanced applications that would work in yoyos.

---

<div class="post-metadata">

### Author: ![Grendel](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/grendel/32/92975_2.png) [@Grendel](https://forums.yoyoexpert.com/u/Grendel)
#### Post date: [September 18, 2020, 1:29am UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/6 "2020-09-18T01:29:42Z")

</div>

You would pay a lot more than sixty bucks a unit, a whole lot more. But it is quaint though.

---

<div class="post-metadata">

### Author: ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)
#### Post date: [September 19, 2020, 3:33am UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/7 "2020-09-19T03:33:47Z")

</div>

Here’s a magnetic non-return top.

> **[Levitron](https://en.wikipedia.org/wiki/Levitron)**
>
> Levitron is a brand of levitating toys and gifts in science and educational markets marketed by Creative Gifts Inc. and Fascination Toys & Gifts. The Levitron top device is a commercial toy under this brand that displays the phenomenon known as spin-stabilized magnetic levitation. This method, with moving permanent magnets, is quite distinct from other versions which use changing electromagnetic fields, levitating various items such as a rotating world globe, model space shuttle or VW Beetle Th...

Dynamic magnetic bearings require a power source - static ones that use only permanent magnets face some difficulties due to the effects described by [Earnshaw's theorem - Wikipedia](https://en.wikipedia.org/wiki/Earnshaw%27s_theorem), which means the magnets can’t actually keep each other in a stable arrangement.

You could use diamagnetic materials but the force involved is very very small compared to the mass and size of the magnets involved.

The yoyo would still be subject to air friction, anyhow.

You can read more about magnetic bearings here: [Magnetic bearing - Wikipedia](https://en.wikipedia.org/wiki/Magnetic_bearing)

---

<div class="post-metadata">

### Author: ![yyfben2.deactivated](https://avatars.discourse-cdn.com/v4/letter/y/ccd318/32.png) [@yyfben2.deactivated](https://forums.yoyoexpert.com/u/yyfben2.deactivated)
#### Post date: [September 19, 2020, 3:53am UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/8 "2020-09-19T03:53:16Z")

</div>

I will use it flying!

---

<div class="post-metadata">

### Author: ![TequilaOrange](https://avatars.discourse-cdn.com/v4/letter/t/d9b06d/32.png) [@TequilaOrange](https://forums.yoyoexpert.com/u/TequilaOrange)
#### Post date: [September 28, 2023, 10:01am UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/9 "2023-09-28T10:01:25Z")

</div>

Okay dude… hold my beer I’m on it

---

<div class="post-metadata">

### Author: ![TequilaOrange](https://avatars.discourse-cdn.com/v4/letter/t/d9b06d/32.png) [@TequilaOrange](https://forums.yoyoexpert.com/u/TequilaOrange)
#### Post date: [September 28, 2023, 7:24pm UTC](https://forums.yoyoexpert.com/t/magnetic-yoyo-bearing/327265/10 "2023-09-28T19:24:04Z")

</div>

Currently made one base side so far
