# Lyn Fury Help! **URL:** \ **Category:** Looking for Help/Recommendation\ **Created:** [February 4, 2010, 2:05am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014 "2010-02-04T02:05:32Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 4, 2010, 2:05am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/1 "2010-02-04T02:05:32Z")
I was playing around with my Lyn Fury and have a problem! My yo-yo dies out randomly! When I opened the yo-yo up, I put the bearing on either side and tested it out. On one bearing seat it spins fine but on the bearing seat with the axle coming out, it gets stuck! Please any help is appreaciated! ??? ??? ??? ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [February 4, 2010, 3:37am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/2 "2010-02-04T03:37:05Z")
Is the plastic shim still there. ---
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 4, 2010, 3:45am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/3 "2010-02-04T03:45:25Z")
ummm on each side there are these things taht pop a little out that kinda look like shims ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [February 4, 2010, 3:46am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/4 "2010-02-04T03:46:43Z")
Everything except the yo-yo dieing are perfectly normal. ---
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 4, 2010, 3:49am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/5 "2010-02-04T03:49:03Z")
> [@Yummy](#): > > Everything except the yo-yo dieing are perfectly normal. Lemme rephrase my issue… so i pop in the bearing to the seat and try to spin it to test it out. The thing is that it is practically stuck and can’t spin ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [February 4, 2010, 3:57am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/6 "2010-02-04T03:57:12Z")
Can the bearing spin when it is out of the yo-yo? ---
**Author:** ![buffallo1297](https://avatars.discourse-cdn.com/v4/letter/b/6a8cbe/32.png) [@buffallo1297](https://forums.yoyoexpert.com/u/buffallo1297)\ **Post date:** [February 4, 2010, 6:46am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/7 "2010-02-04T06:46:26Z")
Oh hey thats what happens to my YYF DNA but I just changed my bearing into a KonKave… ---
**Author:** ![Big\_Andrew](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/big_andrew/32/384_2.png) [@Big\_Andrew](https://forums.yoyoexpert.com/u/Big_Andrew)\ **Post date:** [February 4, 2010, 8:06am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/8 "2010-02-04T08:06:54Z")
i don’t think it is the bearing…i think it is the bearing seat in the axle half of the yoyo…becouse he said that if he puts the bearing on the other half it spins…but on the axle side it became stuck… ---
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 4, 2010, 11:48am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/9 "2010-02-04T11:48:14Z")
> [@Big\_Andrew](#): > > i don’t think it is the bearing…i think it is the bearing seat in the axle half of the yoyo…becouse he said that if he puts the bearing on the other half it spins…but on the axle side it became stuck… Yeah exactly Big Andrew… its not the bearing. i tested out different bearing and the same thing happened. The bearings work fine its just the bearing seat ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [February 4, 2010, 2:32pm UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/10 "2010-02-04T14:32:58Z")
This may help. [quote=jhb8426]Do you by any chance have a set of YYJ shims installed? Remove them if you do. Otherwise, take it apart and remove the bearing. See if there is any mold flash (stray plastic bits) around the axle seat. There were a couple of runs of these that had a problem with that. If it does remove it with a small, sharp knife, like an x-acto. [/quote] A modder might be the only way to fix it. ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [February 4, 2010, 2:42pm UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/11 "2010-02-04T14:42:05Z")
Sounds like my green journey. It was my fault though. lol Not a typical YYJ problem. ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [February 4, 2010, 9:05pm UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/12 "2010-02-04T21:05:53Z")
The bearing seat might of overheated and now is squeezing the bearing. Take a Exacto Knife and carve some of the plastic away. ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [February 4, 2010, 9:54pm UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/13 "2010-02-04T21:54:26Z")
If there is molding flash on the bearing seat then the exacto knife is a good idea. Just carving off plastic from the bearing seat because it is slightly deformed is a terrible idea. Send it to a modder with a lathe for bearing seat adjustments. ---
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 4, 2010, 11:50pm UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/14 "2010-02-04T23:50:54Z")
I really don’t trust myself with a knife to cut plastic away but since i bought it on yyn do you think they will replace it? Like I did’nt even hit the yoyo to the ground or anything. It just happened all of a sudden… ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [February 5, 2010, 12:03am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/15 "2010-02-05T00:03:46Z")
Why ask us what they will do? Ask them. ---
**Author:** ![dryoyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dryoyo/32/39_2.png) [@dryoyo](https://forums.yoyoexpert.com/u/dryoyo)\ **Post date:** [February 5, 2010, 1:57am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/16 "2010-02-05T01:57:35Z")
needle-nose pliers, use round part to clamp onto bearing wiggle loose. With that in mind, the bearing is supposed to stay in place with most of the yoyojam plastics. Best thing to do is just leave the bearing alone. ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [February 5, 2010, 4:00am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/17 "2010-02-05T04:00:04Z")
How long have you had it for? ---
**Author:** ![Chonitoe](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@Chonitoe](https://forums.yoyoexpert.com/u/Chonitoe)\ **Post date:** [February 5, 2010, 11:47am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/18 "2010-02-05T11:47:08Z")
> [@yoyospirit](#): > > How long have you had it for? Have had it for about 3-4 months ---
**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\ **Post date:** [February 6, 2010, 12:49am UTC](https://forums.yoyoexpert.com/t/lyn-fury-help/11014/19 "2010-02-06T00:49:03Z")
Probably not.