# Lubricaing bearings

**URL:** <https://forums.yoyoexpert.com/t/lubricaing-bearings/20418>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [October 28, 2010, 3:55am UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418 "2010-10-28T03:55:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![\_Dodge](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/_dodge/32/674_2.png) [@\_Dodge](https://forums.yoyoexpert.com/u/_Dodge)\
**Post date:** [October 28, 2010, 3:55am UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418/1 "2010-10-28T03:55:55Z")

</div>

Hey how should i apply one drop lube on a bearing? And what do i after it is put on?

---

<div class="post-metadata">

**Author:** ![Paolo](https://avatars.discourse-cdn.com/v4/letter/p/6f9a4e/32.png) [@Paolo](https://forums.yoyoexpert.com/u/Paolo)\
**Post date:** [October 28, 2010, 4:17am UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418/2 "2010-10-28T04:17:56Z")

</div>

If your bearing isn’t deshielded, deshield it first. Then you take a drop of thin lube, drop a drop on a needle, and touch the needlepoint to two or three of the balls in bearing. You can reshield your bearing, but don’t need to.

---

<div class="post-metadata">

**Author:** ![Apetrunk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apetrunk/32/148_2.png) [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)\
**Post date:** [October 28, 2010, 1:24pm UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418/3 "2010-10-28T13:24:53Z")

</div>

Or just put it on the side and then play with it. Lubing isn’t needed very often though.

---

<div class="post-metadata">

**Author:** ![\_Dodge](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/_dodge/32/674_2.png) [@\_Dodge](https://forums.yoyoexpert.com/u/_Dodge)\
**Post date:** [October 31, 2010, 7:09pm UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418/4 "2010-10-31T19:09:51Z")

</div>

thank you

---

<div class="post-metadata">

**Author:** ![Apetrunk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apetrunk/32/148_2.png) [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)\
**Post date:** [October 31, 2010, 7:15pm UTC](https://forums.yoyoexpert.com/t/lubricaing-bearings/20418/5 "2010-10-31T19:15:35Z")

</div>

> [@\_Dodge](#):
>
> thank you

Please use the thank you button located in the top right corner of each post next time. It cuts down on unnecessary posts like this. Thanks.