# Lock a bearing **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [January 14, 2025, 1:11pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187 "2025-01-14T13:11:31Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\ **Post date:** [January 14, 2025, 1:11pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/1 "2025-01-14T13:11:31Z")
i have a bearing that i can’t get to play consistently. id rather brick it and try to use it as a fixie bearing with my @Slestak75 modded se’s. what’s the best way to lock up a bearing, super glue? ---
**Author:** ![spyder-man](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/spyder-man/32/599092_2.png) [@spyder-man](https://forums.yoyoexpert.com/u/spyder-man)\ **Post date:** [January 14, 2025, 1:15pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/2 "2025-01-14T13:15:03Z")
Hoping to see answers to this. I’m also curious if there is anywhere to buy “locked” bearings. Not sure I have a bearing I’m willing to lock up yet. LOL! ---
**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\ **Post date:** [January 14, 2025, 1:40pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/3 "2025-01-14T13:40:30Z")
You can buy bearing “blanks.” As for locking a bearing, you can use super glue, or you can get bearing locks from Layer Infinity, or someone who has a 3D printer. ---
**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\ **Post date:** [January 14, 2025, 1:46pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/4 "2025-01-14T13:46:27Z")
I imagine hot glue would work, and you could cut it down flush with a sharp knife ---
**Author:** ![hooty7734](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hooty7734/32/348981_2.png) [@hooty7734](https://forums.yoyoexpert.com/u/hooty7734)\ **Post date:** [January 14, 2025, 1:54pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/5 "2025-01-14T13:54:03Z")
I like the idea of hot glue as you could also use a heat gun to get it back out. Maybe thread locker would work. Anything you have handy pretty much. Fill it with silicone like a response pad. Melt solder into it. Jam a bunch of dirt into it and put the seal back on it lol. ---
**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\ **Post date:** [January 14, 2025, 2:05pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/6 "2025-01-14T14:05:58Z")
nice tks for the answers. good points about hot glue. i think I’ll start there so i have some margin for error ---
**Author:** ![hooty7734](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hooty7734/32/348981_2.png) [@hooty7734](https://forums.yoyoexpert.com/u/hooty7734)\ **Post date:** [January 14, 2025, 3:04pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/7 "2025-01-14T15:04:49Z")
Also if you wanted to take it apart sized C and you have a crown cage, you could order 1.6-1.7mm balls and replace the 1/16 balls. The larger balls should lock it with however many you can fit evenly spaced. With a 10 cage 5 should be the minimum. ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [January 14, 2025, 3:19pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/8 "2025-01-14T15:19:51Z")
Epoxy works for bricking a bearing, or take it apart and use just the inner race. Or use something to lock the inner and outter race. ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [January 14, 2025, 3:20pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/9 "2025-01-14T15:20:50Z")
Ahh yes sand filed bearings are the best bricked bearings ---
**Author:** ![hooty7734](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hooty7734/32/348981_2.png) [@hooty7734](https://forums.yoyoexpert.com/u/hooty7734)\ **Post date:** [January 14, 2025, 3:33pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/10 "2025-01-14T15:33:27Z")
Tiny rocks for tiny rollers, ahh yes, brings back vivid memories of face eating pavement while skateboarding. ---
**Author:** ![Slestak75](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slestak75/32/212315_2.png) [@Slestak75](https://forums.yoyoexpert.com/u/Slestak75)\ **Post date:** [January 14, 2025, 5:53pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/11 "2025-01-14T17:53:48Z")
Quite honestly… a locked bearing is a locked bearing. So finding the easiest most cost effective way of locking said bearing should be the goal. One method isn’t going to lock it better than another… it just arrives there in a different way. Regardless of the method you’ll need to clean the bearing of the old grease/ oil so the fixing agent can actually fix to the surface. Removing the shields is recommended, but either way, super glue works its way into the bearing very easily, as it’s fairly liquid. It locks the bearing up and never lets go. Of course superglue can glue fingers together so be careful. Acetone (nail polish remover)breaks down superglue if you do happen to glue yourself together. It really doesn’t get much easier or cheaper. ---
**Author:** ![Xanadu](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xanadu/32/84910_2.png) [@Xanadu](https://forums.yoyoexpert.com/u/Xanadu)\ **Post date:** [January 14, 2025, 5:59pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/12 "2025-01-14T17:59:13Z")
This is fair however I have found that some glues will release after some time and the bearing will become semi responsive again. I have had great luck with steel epoxy. The steel particles add a little grit to it which gets into the ball bearings and binds everything up even before setting. Then it bonds permanently. ---
**Author:** ![Slestak75](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slestak75/32/212315_2.png) [@Slestak75](https://forums.yoyoexpert.com/u/Slestak75)\ **Post date:** [January 14, 2025, 6:21pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/13 "2025-01-14T18:21:21Z")
Also fair. :wink::+1: ---
**Author:** ![hooty7734](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hooty7734/32/348981_2.png) [@hooty7734](https://forums.yoyoexpert.com/u/hooty7734)\ **Post date:** [January 14, 2025, 7:39pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/14 "2025-01-14T19:39:08Z")
> [@Slestak75](#): > > It really doesn’t get much easier or cheaper. Quite honestly… this is all fair, however… dirt from my yard is free. (All in good fun 🤪) ---
**Author:** ![Slestak75](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slestak75/32/212315_2.png) [@Slestak75](https://forums.yoyoexpert.com/u/Slestak75)\ **Post date:** [January 14, 2025, 7:41pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/15 "2025-01-14T19:41:37Z")
Dirt also holds the added benefit of… no need to clean the bearing first. 🤣🤣 ---
**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\ **Post date:** [January 14, 2025, 8:02pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/16 "2025-01-14T20:02:29Z")
I’m sure a bit of Play-Doh would do the trick! ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [January 14, 2025, 8:17pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/17 "2025-01-14T20:17:44Z")
I was actually just thinking that. It dries really hard. I know because I’ve stepped on my kids dried creations. ---
**Author:** ![Snoopy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/snoopy/32/669143_2.png) [@Snoopy](https://forums.yoyoexpert.com/u/Snoopy)\ **Post date:** [January 14, 2025, 8:23pm UTC](https://forums.yoyoexpert.com/t/lock-a-bearing/417187/18 "2025-01-14T20:23:56Z")
I once stepped on a “Spike Trap” my sisters made\> blood was shed.