# Let’s talk 3D printing **URL:** \ **Category:** Unrelated Discussion\ **Created:** [July 23, 2020, 4:28pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700 "2020-07-23T16:28:18Z")\ **Posts on this page:** 20\ **Page:** 87
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [August 31, 2025, 10:55pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1727 "2025-08-31T22:55:44Z")
Looks great! Did you print the hub with supports (it looks like you did but confirming). ---
**Author:** ![Simyo](https://avatars.discourse-cdn.com/v4/letter/s/858c86/32.png) [@Simyo](https://forums.yoyoexpert.com/u/Simyo)\ **Post date:** [August 31, 2025, 11:02pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1728 "2025-08-31T23:02:16Z")
I did, the rings I was able to print without supports. I normally use pla as an interface when I print yo-yos in pet g but the googles told me that wasn’t an option with Asa and I didn’t have any Asa support material, so it’s not as clean as I wanted but it works as a proof of concept. ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [September 5, 2025, 6:38pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1729 "2025-09-05T18:38:41Z")
Some simple low profile yoyo stands. Nice for shelf / desk display. [https://makerworld.com/en/models/1767357-low-profile-yoyo-stands](https://makerworld.com/en/models/1767357-low-profile-yoyo-stands) ![FlatStand1](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/3/a/c3a00bff9f14b47df151af7cc7af00f25ab257b3.jpeg) ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [September 21, 2025, 12:50pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1730 "2025-09-21T12:50:54Z")
![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/1/e/11ef6f756fb8daf755a79a8a004b9612205baa53.jpeg) Fresh print. The Cog. It’s response system is inspired by Fallen44’s spiral response. ![IMG_8459](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/e/9/5e9407b8dc716548f737be8b0f686c9640793a19.jpeg) ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [September 21, 2025, 4:00pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1731 "2025-09-21T16:00:18Z")
Now that’s cool ---
**Author:** ![TheThrowingGnome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/thethrowinggnome/32/14231_2.png) [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)\ **Post date:** [September 21, 2025, 4:49pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1732 "2025-09-21T16:49:01Z")
The Cog pattern on the outside is neat. but I think the swirl pattern on both sides would be cooler. ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [September 21, 2025, 7:27pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1733 "2025-09-21T19:27:38Z")
That’s not a bad idea… ---
**Author:** ![Cutting2crew](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cutting2crew/32/349079_2.png) [@Cutting2crew](https://forums.yoyoexpert.com/u/Cutting2crew)\ **Post date:** [September 22, 2025, 12:02am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1734 "2025-09-22T00:02:28Z")
My newest design for my new favorite style of play > **[slim butterfly by Cutting2crew by Cutting2crew | Download free STL model |...](https://www.printables.com/model/1421663-slim-butterfly-by-cutting2crew)** ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [September 26, 2025, 2:33am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1735 "2025-09-26T02:33:42Z")
I’ve had this idea rattling around in my head for ages but 3d printing alone couldn’t manage the intricate design. Little bits of rice would break off. Printed Japanese 5 yen coin Asora caps. Laser engraver was used to mark the design on the caps. The hole makes for excellent pullstarts and I can see the little gem through them. ![IMG_0567](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/f/c/9/fc9e6c5fb1e4755d3756b1e7cc318a9047cd2f3f.jpeg) ![IMG_0566](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/3/8/2/3821d23b982321f4cded3b7c6295e1377134d2d2.jpeg) ---
**Author:** ![Son-of-Morris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/son-of-morris/32/250533_2.png) [@Son-of-Morris](https://forums.yoyoexpert.com/u/Son-of-Morris)\ **Post date:** [October 15, 2025, 7:07pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1736 "2025-10-15T19:07:04Z")
Got myself a sweet sweet care package from the ever incredible @AudreySickburn. Can’t say thank you enough for the Pancake Trampler 🥞, the Green Eggs and Ham 🍳, and the accompanying book for the new kiddo 📗! Absolutely love them, and you went above and beyond once again! Always amazed how Andy is able to blend novelty with fantastic playability! Killer throws! 🙂 Pardon my sleep deprived everything and coordination, just wanted to let you know they were getting some love! 🤣 ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [October 15, 2025, 7:12pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1737 "2025-10-15T19:12:28Z")
That was incredibly impressive! Wow. I couldn’t even walked up the stairs safely after our kids were born :joy: Amazing! I’ll have to show that one to my kids to blow their minds. ---
**Author:** ![rkalajian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rkalajian/32/672584_2.png) [@rkalajian](https://forums.yoyoexpert.com/u/rkalajian)\ **Post date:** [October 15, 2025, 7:15pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1738 "2025-10-15T19:15:34Z")
That’s HOT! ---
**Author:** ![Son-of-Morris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/son-of-morris/32/250533_2.png) [@Son-of-Morris](https://forums.yoyoexpert.com/u/Son-of-Morris)\ **Post date:** [October 15, 2025, 7:44pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1739 "2025-10-15T19:44:33Z")
I can’t wait to get some cognizant play time out of them, haha! I put ketchup in my coffee the other day. Not recommended. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [October 15, 2025, 8:48pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1740 "2025-10-15T20:48:35Z")
My worst tired parent moment was accidentally packing breast pump parts in my work lunch box and finding them when I went to go eat instead of finding food. ---
**Author:** ![Cutting2crew](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cutting2crew/32/349079_2.png) [@Cutting2crew](https://forums.yoyoexpert.com/u/Cutting2crew)\ **Post date:** [November 6, 2025, 11:02pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1741 "2025-11-06T23:02:06Z")
Made a new proyo axle that’s easier to print > **[proyo axles v2 by Cutting2crew | Download free STL model | Printables.com](https://www.printables.com/model/1455374-proyo-axles-v2)** ---
**Author:** ![intervade](https://avatars.discourse-cdn.com/v4/letter/i/59ef9b/32.png) [@intervade](https://forums.yoyoexpert.com/u/intervade)\ **Post date:** [November 7, 2025, 12:07am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1742 "2025-11-07T00:07:56Z")
has anyone encountered a pulse wobble on some of their designs? it seems so far completely related to the shape of the yoyo. some of the yoyos are dead smooth, then carving out some different weight distribution will make the thing pulse wobble insane and unusable. changing from printed threads to side effects also presents no difference. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [November 7, 2025, 12:27am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1743 "2025-11-07T00:27:01Z")
Yes aggressive pulse vibe can be a thing and is definitely shape driven. I’ve had designs pulse so aggressively they respond in their own. What I have found is the wider the design the more pulse. I suspect this is because prints aren’t always 100% uniform so the wider it goes the more that affects spin. If a design pulses like nuts I will usually pull it in and make it a little less wide and a little more diameter to reduce it. ---
**Author:** ![Tshou](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tshou/32/611160_2.png) [@Tshou](https://forums.yoyoexpert.com/u/Tshou)\ **Post date:** [November 7, 2025, 4:10am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1744 "2025-11-07T04:10:15Z")
I LOVE THIS, I studied linguistics abroad in january for a month in Osaka and being able to actually use coins for everything was so nice ![IMG_0911](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/d/f/1df3d78b576d4428fb7b718e12b26a4a2c92cbc9.jpeg) i need those asora caps !! seriously super cool ---
**Author:** ![intervade](https://avatars.discourse-cdn.com/v4/letter/i/59ef9b/32.png) [@intervade](https://forums.yoyoexpert.com/u/intervade)\ **Post date:** [November 8, 2025, 10:36am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1745 "2025-11-08T10:36:04Z")
addressing both points - uniformity and width uniformity - makes a bit of sense, but if uniformity due to the machine was a factor i would expect to see differences in pulse vibe per printer. however, the designs that pulse will do so on all my machines. includes both corexy and i3 styles. sadly, i haven’t finished a polar design to test that. width - i would have to disagree here. i have a 45.3mm wide yoyo that is totally fine and a 38.38mm wide that will pulse. the 38.38mm will pulse or not depending on how i change weight distribution rim wise. i have noticed that more organic shapes usually behave better. the more angular shapes have more tendency to pulse. i have not tried the freshly dirty stem system they gave me yet and am curious if that will make any difference, being a more fully realized bearing system. unsure if printed seats etc make issues more prevalent. ---
**Author:** ![Cutting2crew](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cutting2crew/32/349079_2.png) [@Cutting2crew](https://forums.yoyoexpert.com/u/Cutting2crew)\ **Post date:** [November 13, 2025, 9:51pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1746 "2025-11-13T21:51:49Z")
Made a updated version of my proyo design, now with pogs > **[Duncan Proyo V2 Pog Edfition by Cutting2crew | Download free STL model |...](https://www.printables.com/model/1472277-duncan-proyo-v2-pog-edfition)** [Previous page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=86) [Next page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=88)