# Let’s talk 3D printing **URL:** \ **Category:** Unrelated Discussion\ **Created:** [July 23, 2020, 4:28pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700 "2020-07-23T16:28:18Z")\ **Posts on this page:** 20\ **Page:** 78
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [June 21, 2025, 1:32am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1547 "2025-06-21T01:32:52Z")
![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/6/a/66ac7e91e57374a22a584bbe5cf575e7e52aeda7.jpeg) Finally got my transparent PLA Planet playing. The last pair of pads I put in seemed not great. I had thought it was the PLA resisting the adhesive, but I think it was just the specific pads. A new set seems to be fine. ---
**Author:** ![Son-of-Morris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/son-of-morris/32/250533_2.png) [@Son-of-Morris](https://forums.yoyoexpert.com/u/Son-of-Morris)\ **Post date:** [June 21, 2025, 1:57am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1548 "2025-06-21T01:57:20Z")
Well that’s definitely going to have to go on my wishlist for my bee-themed shelf, haha! ---
**Author:** ![kretzschmar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kretzschmar/32/668707_2.png) [@kretzschmar](https://forums.yoyoexpert.com/u/kretzschmar)\ **Post date:** [June 21, 2025, 3:14am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1549 "2025-06-21T03:14:27Z")
It’s definitely worthy. And since I promised it was good at 0A (even though I’m not the best lol.) It stalls like a champion. To be able to do those 1A responsive tricks on the earlier video, and then 0A in this one, and to feel natural in both, it just seems so rare to find a yoyo that can do that so well. ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [June 22, 2025, 3:49pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1550 "2025-06-22T15:49:43Z")
![IMG_8193](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/e/3/5e3ddadb05a3b0595e07176e5ea644d019b50f4d.jpeg) ![IMG_8194](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/1/d/a1d46c01027f809eea9faad902c69da4080b160c.jpeg) ![IMG_8195](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/7/1/771fa9dfdaa74dc03a5d5ad9fba81cf0546e9b21.jpeg) My new unresponsive. Not yet named. C bearing. Should be around 65g but I haven’t weighed it yet. About 54mm x 46mm. Double rim. ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [June 23, 2025, 2:12am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1551 "2025-06-23T02:12:20Z")
Getting closer on the TPU rimmed unresponsive design. ![Caramel](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/4/1/44102d59c6698844f4e8472c08d26beb1e5d1971.jpeg) ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [June 26, 2025, 9:44pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1552 "2025-06-26T21:44:09Z")
![IMG_8203](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/a/c/5ac7ec0b89db87fe91688c375a04e877dbd6f615.jpeg) D bearing Planet. It turned out **mostly** unresponsive. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [June 27, 2025, 10:32pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1553 "2025-06-27T22:32:32Z")
Spaceballs, The Yo-Yo. My second unresponsive design. It vibes so much if not thrown with absolute precision. But I love it. I gotta print a couple more to make sure it’s consistent before I share files. ![IMG_9656](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/c/7/6c7d2b80d13e50e7d72f261ecda79955d6bc4e25.jpeg) ![IMG_9653](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/a/b/bab1761be893d5d5cef9cb4e8d4a1f5e0e7b9b18.jpeg) ![IMG_9652](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/0/e/c0e4e0aa9fa922350c365f5e59e37f0d1a06c3f3.jpeg) ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [June 27, 2025, 10:39pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1554 "2025-06-27T22:39:24Z")
Halves are threaded together to join. ![IMG_9659](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/5/4/55487e4821b84f6eeeba74c2dab6573ba16d0f46.jpeg) ![IMG_9658](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/8/6/5/8655513d4401492bb1b0ccb327d0367f39b24d56.jpeg) ---
**Author:** ![SethBurgess](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/sethburgess/32/296332_2.png) [@SethBurgess](https://forums.yoyoexpert.com/u/SethBurgess)\ **Post date:** [July 1, 2025, 1:51pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1555 "2025-07-01T13:51:20Z")
I like the design and concept! It should probably transform into a MegaMaid somehow. Or at least include a Cracker Jack ring to help channel the Schwartz when throwing. Maybe have one side have the upside and the other the downside? Some metal rings would probably improve the vibe actually… (though maybe the gemstones would remove that benefit) Or you could do 3a with them - try not to get your Schwartz twisted. ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [July 1, 2025, 2:33pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1556 "2025-07-01T14:33:23Z")
I loved everything about this comment. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [July 1, 2025, 2:38pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1557 "2025-07-01T14:38:49Z")
I’m considering printing a portion of the ball in stainless steel filament to better balance the Schwartz and improve spin time. ---
**Author:** ![AquaJoe](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/aquajoe/32/292_2.png) [@AquaJoe](https://forums.yoyoexpert.com/u/AquaJoe)\ **Post date:** [July 1, 2025, 7:06pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1558 "2025-07-01T19:06:18Z")
Anyone have any STLs of yo-yos? I have an x1c just waiting to print some yo-yos! Haha ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [July 1, 2025, 7:23pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1559 "2025-07-01T19:23:05Z")
Here’s my Honeycomb model on Makerworld: [Honeycomb](https://makerworld.com/en/models/1222192-honeycomb-responsive-yoyos#profileId-1239210) @AudreySickburn has a bunch of designs on Printables here: [https://www.printables.com/@AudreySickbur\_131066/models](https://www.printables.com/@AudreySickbur_131066/models) @TryCatchThrow has some here: [https://www.printables.com/@TryCatchThro\_2868730/models](https://www.printables.com/@TryCatchThro_2868730/models) Dale Tubat has an unresponsive design available for download here: [https://www.daletubat.com/downloads](https://www.daletubat.com/downloads) ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [July 1, 2025, 7:25pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1560 "2025-07-01T19:25:46Z")
My 2nd P1S combo arrived today. Yoyo production doubled! Need to check with IT at work to see if they’ll let me put one in my office, since finding space for it at home will be tough. ![P1S](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/c/c/ccc92896cb322b87ba3bb2a9f1a1cbccfc86a867.jpeg) ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [July 2, 2025, 3:24pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1561 "2025-07-02T15:24:15Z")
Today I printed the 3DM by @redzaku. ![IMG_8208](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/b/a/9/ba9d03f5e7e3c5f26fdfa6beb79c8508aa0a95dd.jpeg) It’s pretty nice. Mine came out a little vibey but I tend to remove supports poorly 🤪 ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [July 2, 2025, 5:19pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1562 "2025-07-02T17:19:08Z")
Mega Maid edition. The extra weight on the outer region made a big difference, reduced vibe, longer spin, bigger Schwartz. ![IMG_9700](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/2/3/c/23c683458874b4f002fb887e89dd6bcf0bffb104.jpeg) ---
**Author:** ![chrisnotes86](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/chrisnotes86/32/173173_2.png) [@chrisnotes86](https://forums.yoyoexpert.com/u/chrisnotes86)\ **Post date:** [July 2, 2025, 6:11pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1563 "2025-07-02T18:11:41Z")
Just cover it with a camo blanket or something similar- they wont even notice dog ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [July 2, 2025, 6:41pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1564 "2025-07-02T18:41:03Z")
![IMG_8210](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/2/3/4/23461353e742be90783baceb877dfa08c0a25f5b.jpeg) ![IMG_8211](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/8/7/d875caa7c998d49163c2d2b585f6833abb8f94c1.jpeg) Last print of someone else’s design for today (probably) is @daletubat’s Intro. Holy \*\*\*\*. I feel like I downloaded a Shooting Star. If I got better hardware I would be 1000% confident handing this out as a beginner throw at club. Super capable. ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [July 3, 2025, 12:11pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1565 "2025-07-03T12:11:58Z")
Two prints to show off, somewhat related. First is my D bearing Planet. This one I put TPU pads in first but they were not up to the task. I siliconed it now and wow is it a player. If I find a good source for D bearings, I might make a few more. ![IMG_8214](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/e/6/2/e62ef2b67c2bfb7dba5d43c151aed1c62f412192.jpeg) The bearings I bought for making D bearing Planets were crunchy, but waste not want not. I designed the Crunchy to use these bearings. ![IMG_8213](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/a/f/1afde9b039f60ea74eff6d3bc832216c039c1ac1.jpeg) ![IMG_8212](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/2/4/12426f5499e00dff389395b35a9cc40f9224b459.jpeg) Due to a minor human error this one has no response system 😅. I had designed it with an 8 hole response so I don’t need to silicone or find D bearing pads (I’ve had no luck with that yet). In re-running it as I type, with holes. Even without them, the yoyo plays just not as snappy as I like. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [July 4, 2025, 12:09am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1566 "2025-07-04T00:09:29Z")
Make your own Spaceballs, the Yo-Yo today! > **[Spaceballs, The Yo-Yo by AudreySickburn | Download free STL model |...](https://www.printables.com/model/1345474-spaceballs-the-yo-yo)** > > I see your Schwartz is as big as mine | Download free 3D printable STL models [Previous page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=77) [Next page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=79)