# Let’s talk 3D printing **URL:** \ **Category:** Unrelated Discussion\ **Created:** [July 23, 2020, 4:28pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700 "2020-07-23T16:28:18Z")\ **Posts on this page:** 20\ **Page:** 71
**Author:** ![TyrantHive](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tyranthive/32/609146_2.png) [@TyrantHive](https://forums.yoyoexpert.com/u/TyrantHive)\ **Post date:** [April 23, 2025, 5:02pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1407 "2025-04-23T17:02:45Z")
I’ve been having a problem where early on in my print the nozzle of the thingy (such intellect I know) seems to scrape the base of the print off the bed. What should I do? ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [April 23, 2025, 5:06pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1408 "2025-04-23T17:06:00Z")
Sounds like a bed adhesion issue, but solving it will require some details, like the printer model, build plate surface, print settings, etc. ---
**Author:** ![TyrantHive](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tyranthive/32/609146_2.png) [@TyrantHive](https://forums.yoyoexpert.com/u/TyrantHive)\ **Post date:** [April 23, 2025, 5:08pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1409 "2025-04-23T17:08:14Z")
I’ll check. What print settings should I be looking at? ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [April 23, 2025, 5:11pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1410 "2025-04-23T17:11:29Z")
The most common causes of adhesion failure from what I’ve seen are improper bed leveling, a dirty build plate, and bed temp too low for the ambient temperature/airflow situation. Printing the first layer too fast can also be problematic. ---
**Author:** ![TyrantHive](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tyranthive/32/609146_2.png) [@TyrantHive](https://forums.yoyoexpert.com/u/TyrantHive)\ **Post date:** [April 23, 2025, 5:13pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1411 "2025-04-23T17:13:13Z")
Ok, thanks a ton. It’s just been real frustrating to waste a bunch of material and time. ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [April 23, 2025, 6:32pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1412 "2025-04-23T18:32:10Z")
Yep. Clean your bed thoroughly. If it’s self leveling check your z offset, if not level it thoroughly with parchment paper. Check your temperature to make sure you aren’t printing too hot and extruding too much material. Does the first layer look flat and even or does each pass through kind of push up material around it making it look like a filled field? Do the corners of the print lift up? As many details as possible will help diagnose. ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [April 23, 2025, 10:09pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1413 "2025-04-23T22:09:14Z")
> [@TyrantHive](#): > > What print settings should I be looking at? ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/b/d/abde162629be29f6c119f635f4cf0a66d348896b.gif "Angry Gary Oldman GIF - Angry Gary Oldman Everyone - Discover & Share GIFs") ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [April 26, 2025, 3:32pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1414 "2025-04-26T15:32:21Z")
First batch of wedding favor yoyos getting silicone this morning. ![PXL_20250426_152932698](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/e/9/de9a8f9fa242b3125a64902ec91b5b3be31f353e.jpeg) ---
**Author:** ![SlacKing](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@SlacKing](https://forums.yoyoexpert.com/u/SlacKing)\ **Post date:** [April 26, 2025, 4:00pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1415 "2025-04-26T16:00:42Z")
Those are my kind of wedding favors! ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [April 26, 2025, 4:46pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1416 "2025-04-26T16:46:10Z")
That’s so awesome ---
**Author:** ![MinerJ](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/minerj/32/629515_2.png) [@MinerJ](https://forums.yoyoexpert.com/u/MinerJ)\ **Post date:** [May 3, 2025, 1:47pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1417 "2025-05-03T13:47:06Z")
After doing QC, assembly, and putting strings on 60 printed yoyos, I’ve got a whole new level of respect for the small boutique yoyo makers out there. Putting a string on a throw seems like a quick and easy task, but doing it 60 times back to back is a different story. Bought some cheap muslin drawstring bags to put them in, and currently 3D printing some stamps to stamp the bags with the wedding date and some appropriate decorations. Then all that will be left is the custom POG caps, and a card or paper with some yoyo basics. ![PXL_20250502_052252704](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/f/3/cf336adcc4094532e88e07fd2eb5a89a9e8701ed.jpeg) ![PXL_20250503_012632135](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/6/0/160fb2f4790aded4d91e117547d4c6230165ae1b.jpeg) ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [May 3, 2025, 3:30pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1418 "2025-05-03T15:30:39Z")
Looks awesome! ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [May 3, 2025, 3:37pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1419 "2025-05-03T15:37:51Z")
Awesome ---
**Author:** ![Kalic00](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kalic00](https://forums.yoyoexpert.com/u/Kalic00)\ **Post date:** [May 7, 2025, 1:41pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1420 "2025-05-07T13:41:30Z")
![1000036264](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/2/0/e/20edc049b3f91ebdb112e4ec587c7b1ada627bcf.jpeg) After breaking my Dunk LX, i figured why not try to use the guts and make myself a new yoyo. Profile is pretty close to the LX, eyeballed a good amount of it. Ive gotta clean up the recess for the weight rings, but im pretty happy with it ---
**Author:** ![redzaku](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/redzaku/32/231660_2.png) [@redzaku](https://forums.yoyoexpert.com/u/redzaku)\ **Post date:** [May 7, 2025, 2:34pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1421 "2025-05-07T14:34:34Z")
i haven’t been on here for a while, seeing everyone here having a lot of progress in 3d printing yoyos is making my hands itch to design my 2025 version ---
**Author:** ![TryCatchThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/trycatchthrow/32/171307_2.png) [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)\ **Post date:** [May 7, 2025, 5:13pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1422 "2025-05-07T17:13:52Z")
This is my newest counterweight. It’s kind of hard to describe so check out the vid. ---
**Author:** ![Son-of-Morris](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/son-of-morris/32/250533_2.png) [@Son-of-Morris](https://forums.yoyoexpert.com/u/Son-of-Morris)\ **Post date:** [May 9, 2025, 8:46pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1423 "2025-05-09T20:46:50Z")
Sincere thanks to @MinerJ for the Honeycomb hookup (and a couple other super fun prints)! This little guy is fantastic, living up to the hype I’ve been seeing about it around here, and a great companion to the Honeybees. Great play, great response, overall looks cool, and the comb makes a sweet sound while spinning! Absolutely love it, and appreciate the growth of my bee army! ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/c/c/9/cc92579b08584a5b1801b77aa5fd1d2a7f8cef5c.jpeg) As the dreaded Hornets and Wasps get closer, the bees call upon their cousins and bring in the Honey Mustard Atmos, the Honey Badgers, and the dreaded Honeybun to protect the rest of the hive. 🤣 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/f/2/df2b0f9799c7d2cf176f7bbb05f25d824ba37cfd.jpeg) ---
**Author:** ![Armarouge999](https://avatars.discourse-cdn.com/v4/letter/a/e47774/32.png) [@Armarouge999](https://forums.yoyoexpert.com/u/Armarouge999)\ **Post date:** [May 11, 2025, 12:01am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1424 "2025-05-11T00:01:25Z")
Hey people, I want to print a yoyo but can’t find any good designs using only 3d printed objects, do any of you have a file like that? ---
**Author:** ![AudreySickburn](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/audreysickburn/32/313292_2.png) [@AudreySickburn](https://forums.yoyoexpert.com/u/AudreySickburn)\ **Post date:** [May 11, 2025, 12:13am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1425 "2025-05-11T00:13:45Z")
I have four print in place fixed axles that require no hardware at all. As well as a bunch that use metal shelf pins. > **[AudreySickburn | Printables.com](https://www.printables.com/@AudreySickbur_131066/models)** > > I like yo-yos and 3d printing. – 3D models ---
**Author:** ![Armarouge999](https://avatars.discourse-cdn.com/v4/letter/a/e47774/32.png) [@Armarouge999](https://forums.yoyoexpert.com/u/Armarouge999)\ **Post date:** [May 11, 2025, 1:09am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/1426 "2025-05-11T01:09:30Z")
Thank you so much!!! 🤩 [Previous page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=70) [Next page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=72)