# Let’s talk 3D printing
**URL:** https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700
**Category:** Unrelated Discussion
**Created:** [July 23, 2020, 4:28pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700 "2020-07-23T16:28:18Z")
**Posts on this page:** 20
**Page:** 36
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 6, 2024, 1:14am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/706 "2024-06-06T01:14:17Z")
Wood and plastic were similarly responsive but the plastic had a small bit of vibe the first time I installed it. I removed it and cleaned it up and it’s better, but it definitely has a different feel than the wood.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 6, 2024, 1:26pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/707 "2024-06-06T13:26:38Z")
Been busy.
Replacement TMBR axle with actual wood axle.
New proto: the Cardigan.
Also repaired my fingerspin butterfly where I fully cracked a half.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 6, 2024, 1:46pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/708 "2024-06-06T13:46:56Z")
Play tests.
TMBR replacement axle.
Sweater Combo with The Cardigan.
---
### Author:  [@Kray](https://forums.yoyoexpert.com/u/Kray)
#### Post date: [June 6, 2024, 2:44pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/709 "2024-06-06T14:44:27Z")
Playing one of my older prints
---
### Author:  [@yoyoknight](https://forums.yoyoexpert.com/u/yoyoknight)
#### Post date: [June 6, 2024, 5:06pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/710 "2024-06-06T17:06:35Z")
I like that bright red. Reminds me of this one I printed a while back and the Big Sun.
---
### Author:  [@yoyoknight](https://forums.yoyoexpert.com/u/yoyoknight)
#### Post date: [June 6, 2024, 5:10pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/711 "2024-06-06T17:10:04Z")
Been playing around with them a little bit and printed some a little bit bigger and in TPU. Each ring weighs 3 grams. You were right though it definitely helped the performance. Ive really been enjoying this lighter yoyo.
---
### Author:  [@cowmamba](https://forums.yoyoexpert.com/u/cowmamba)
#### Post date: [June 7, 2024, 3:26am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/712 "2024-06-07T03:26:32Z")
That’s awesome! I was thinking about doing TPU too but haven’t gotten around to it yet. I bet it also changes the sound a bit too. May need to do a TPU set tomorrow!
---
### Author:  [@cowmamba](https://forums.yoyoexpert.com/u/cowmamba)
#### Post date: [June 7, 2024, 5:05am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/713 "2024-06-07T05:05:45Z")
Finished up the Headamame project a couple of days ago. Crazy cool how well these sound and feel. I do wish I had printed the cans at something like 0.20 or 0.16 instead of 0.36 but it’s not a big deal, they still came out pretty decent.
The filament I used for each part follows:
**Cans** : Flashforge PLA - [Burnt Titanium](https://www.amazon.com/FLASHFORGE-Filament-Dimensional-Accuracy-Printing/dp/B09XHS5F3S?pd_rd_w=35tTD&content-id=amzn1.sym.b46c8fe2-d558-44b6-a291-82096c829da9&pf_rd_p=b46c8fe2-d558-44b6-a291-82096c829da9&pf_rd_r=NC46CM7DNTV4ZNWWZ8F0&pd_rd_wg=vKzIK&pd_rd_r=efd57995-e047-4e95-ae64-8720d879ee47&pd_rd_i=B09XHS5F3S&psc=1&ref_=pd_bap_d_grid_rp_0_1_ec_pd_nav_hcs_rp_4_i)
**Spring + Center** - [Inland clear PETg+](https://www.microcenter.com/product/626540/175mm_PETG_3D_Printer_Filament_-_1kg_(22_lbs)_Spool_-_Transparent)
**Headband** - [Eryone Purple sparkle PETG](https://www.amazon.com/gp/product/B0979B9JRR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
**Headband Spring** - [Sainsmart Blue TPU (95a)](https://www.amazon.com/gp/product/B071SJ8SDQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
**Band clips** -[CapTubes Thermochromatic Yellow/Green shift PLA](https://www.captubes.com/shop/#!/Green-Yellow-Thermochromic-Filament-1-75mm/p/463172104/category=34480593)
---
### Author:  [@TMAN\_PRINTS](https://forums.yoyoexpert.com/u/TMAN_PRINTS)
#### Post date: [June 7, 2024, 5:43pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/714 "2024-06-07T17:43:14Z")
I have wanted to do these for a while😅 how is the bass?
---
### Author:  [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)
#### Post date: [June 8, 2024, 4:02am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/715 "2024-06-08T04:02:20Z")
Looks like a1 mini is in sale
---
### Author:  [@cowmamba](https://forums.yoyoexpert.com/u/cowmamba)
#### Post date: [June 8, 2024, 4:09am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/716 "2024-06-08T04:09:09Z")
They are pretty great. I was really on the fence for a while it took a lot of self convincing to buy the parts kit haha! I went with the 40mm version and they are way better than I expected. Bass response is pretty good but if you’re a real bass head I think they recommend the 50mm version.
I definitely want to try the other drivers because I am super curious about how they all sound and compare to one another. I just wish the price wasn’t so damn high. I might just self source the drivers instead of ordering more kits. I’d say if you want to make them, it’s totally worth it!
---
### Author:  [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)
#### Post date: [June 8, 2024, 12:38pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/717 "2024-06-08T12:38:33Z")
199$ for the A1 mini is great!
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 9, 2024, 12:35pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/718 "2024-06-09T12:35:33Z")
An undersized unresponsive with Cabal guts. Pulse vibey. I forgot to put a sacrificial bridge in the through hole. Reprinting with changes.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 9, 2024, 5:51pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/719 "2024-06-09T17:51:01Z")
Second print pulses much less. I’m not sure why this filament is bridging so much inside the cup. Maybe need to turn the fans down and cool slowly?
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 10, 2024, 1:00am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/720 "2024-06-10T01:00:27Z")
Does this count as a half swap?
---
### Author:  [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)
#### Post date: [June 10, 2024, 1:01am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/721 "2024-06-10T01:01:53Z")
That’s only half of a half swap
---
### Author:  [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)
#### Post date: [June 10, 2024, 1:05am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/722 "2024-06-10T01:05:03Z")
It counts as super cool
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 12, 2024, 10:25pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/723 "2024-06-12T22:25:13Z")
Russell style Hornet caps. Good fit on the blue side, too loose on the clear.
---
### Author:  [@TryCatchThrow](https://forums.yoyoexpert.com/u/TryCatchThrow)
#### Post date: [June 14, 2024, 2:17pm UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/724 "2024-06-14T14:17:14Z")
I wonder if I have maybe printed too many weights to give out at Nats :thinking:
---
### Author:  [@TMAN\_PRINTS](https://forums.yoyoexpert.com/u/TMAN_PRINTS)
#### Post date: [June 15, 2024, 5:48am UTC](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700/725 "2024-06-15T05:48:26Z")
Finally got my Printer set up to print PETG again! It is my favorite material so I am really excited. I made a new personal Throwdown with it and it turned out pretty nice. I am noticing that It plays slightly more responsive than the PLA version which is intriguing 😜
[Previous page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=35)
[Next page](https://forums.yoyoexpert.com/t/let-s-talk-3d-printing/324700.md?page=37)