# legacy II trouble
**URL:** https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355
**Category:** Yo-Yo Mods and Maintenance
**Created:** [May 31, 2013, 4:35pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355 "2013-05-31T16:35:52Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [May 31, 2013, 4:35pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/1 "2013-05-31T16:35:52Z")
any bearing fit in the yoyo i had tried with a OD size C and a yyf size C not even the yyj speed bearing
---
### Author:  [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)
#### Post date: [May 31, 2013, 4:44pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/2 "2013-05-31T16:44:15Z")
Umm, are you saying only the speed bearing fits in your Legacy II?
They should all fit.
Or no bearing fits? Make sure there is no bearing in the yoyo. Take a cotton swab and dip it in Rubbing Alchohol. Then run the seat until it looks clean.
Or just see if there is something in the seat or if something looks deformed. Like a small bump or a little spike, or a chip.
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [May 31, 2013, 4:59pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/3 "2013-05-31T16:59:07Z")
sorry for bad english not my native language ;D . i was triying to say that no bearing fits in the yoyo.
---
### Author:  [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)
#### Post date: [May 31, 2013, 5:03pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/4 "2013-05-31T17:03:53Z")
> [@Amberplop](#):
>
> sorry for bad english not my native language ;D . i was triying to say that no bearing fits in the yoyo.
No problem!
Check what I said to check for where the bearing should go ;).
---
### Author:  [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [May 31, 2013, 6:02pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/5 "2013-05-31T18:02:22Z")
> [@Amberplop](#):
>
> sorry for bad english not my native language ;D . i was triying to say that no bearing fits in the yoyo.
If it’s new, contact where you bought it from and ask for an exchange.
If it’s not new, you need to figure out what the issue is.
Is the yoyo and/or bearing not spinning? Maybe the solid spin axle has come loose. Maybe the sides of the bearing seat need a bit of shaving off of some plastic? But that would indicate a manufacturing defect.
Also check that area for stuff in there that shouldn’t be in there.
The Legacy II should work fine with any C size bearing.
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [May 31, 2013, 6:03pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/6 "2013-05-31T18:03:09Z")
i just try to clean it with alcohol not it fits but it doesnt spin
---
### Author:  [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)
#### Post date: [May 31, 2013, 6:11pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/7 "2013-05-31T18:11:41Z")
> [@Amberplop](#):
>
> i just try to clean it with alcohol not it fits but it doesnt spin
Take the bearing out of the yoyo and stick it on a pencil/pen/rod and flick it and see if its spins rough and slow or fast and free.
Yeah, do the alchohol thing.
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [May 31, 2013, 8:38pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/8 "2013-05-31T20:38:15Z")
Take out the bearing. It’s probably a crappy old one. Buy this and put it in. I’m 100% positive it will work if placed inside the yoyo properly:
> **[One Drop 10 Ball Bearing](https://shop.yoyoexpert.com/products/one-drop-10-ball-yoyo-bearing)**
>
> The 10 Ball Bearing from One Drop features 10 balls inside compared to the standard 8 balls! This is the bearing that comes standard in most One Drop products.This bearing has quickly become famous for its very smooth and noticeably quieter spins....
[ ](https://www.youtube.com/watch?v=01hNfVwhHW8)
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [May 31, 2013, 8:38pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/9 "2013-05-31T20:38:50Z")
Also we need Pics. Please post them If you know how to. :wink:
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [June 1, 2013, 1:32am UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/10 "2013-06-01T01:32:57Z")
The bearing spin well in other yoyos The OD bearing is new
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [June 1, 2013, 2:07am UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/11 "2013-06-01T02:07:34Z")
> [@Amberplop](#):
>
> The bearing spin well in other yoyos The OD bearing is new
We still need Pictures of Bearing Seat.
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [June 1, 2013, 2:08am UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/12 "2013-06-01T02:08:48Z")
Maybe tomorrow because i dont have The yoyo right now
---
### Author:  [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)
#### Post date: [June 1, 2013, 2:17pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/13 "2013-06-01T14:17:00Z")
> [@Noonar](#):
>
> Take out the bearing. It’s probably a crappy old one. Buy this and put it in. I’m 100% positive it will work if placed inside the yoyo properly:
>
> [One Drop 10 Ball Bearing – YoYoExpert](http://shop.yoyoexpert.com/product/184/One-Drop-10-Ball-Bearing)
>
> [http://www.youtube.com/watch?v=01hNfVwhHW8](http://www.youtube.com/watch?v=01hNfVwhHW8)
Just cause its crappy doesn’t mean it’s not going to fit.
Besides, he said he has tried more than 1…
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [June 1, 2013, 2:18pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/14 "2013-06-01T14:18:42Z")
> [@Bcmaddog](#):
>
> > [@Noonar](#):
> >
> > Take out the bearing. It’s probably a crappy old one. Buy this and put it in. I’m 100% positive it will work if placed inside the yoyo properly:
> >
> > [One Drop 10 Ball Bearing – YoYoExpert](http://shop.yoyoexpert.com/product/184/One-Drop-10-Ball-Bearing)
> >
> > [http://www.youtube.com/watch?v=01hNfVwhHW8](http://www.youtube.com/watch?v=01hNfVwhHW8)
>
> Just cause its crappy doesn’t mean it’s not going to fit.
>
> Besides, he said he has tried more than 1…
I meant there might be gunk in the side of the bearing.
---
### Author:  [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)
#### Post date: [June 1, 2013, 2:24pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/15 "2013-06-01T14:24:16Z")
> [@Noonar](#):
>
> > [@Bcmaddog](#):
> >
> > > [@Noonar](#):
> > >
> > > Take out the bearing. It’s probably a crappy old one. Buy this and put it in. I’m 100% positive it will work if placed inside the yoyo properly:
> > >
> > > [One Drop 10 Ball Bearing – YoYoExpert](http://shop.yoyoexpert.com/product/184/One-Drop-10-Ball-Bearing)
> > >
> > > [http://www.youtube.com/watch?v=01hNfVwhHW8](http://www.youtube.com/watch?v=01hNfVwhHW8)
> >
> > Just cause its crappy doesn’t mean it’s not going to fit.
> >
> > Besides, he said he has tried more than 1…
>
> I meant there might be gunk in the side of the bearing.
He said it doesn’t fit. And won’t spin.
Are we confused?
Does the bearing spin in other yoyos?
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [June 1, 2013, 3:34pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/16 "2013-06-01T15:34:39Z")
> [@Bcmaddog](#):
>
> > [@Noonar](#):
> >
> > > [@Bcmaddog](#):
> > >
> > > > [@Noonar](#):
> > > >
> > > > Take out the bearing. It’s probably a crappy old one. Buy this and put it in. I’m 100% positive it will work if placed inside the yoyo properly:
> > > >
> > > > [One Drop 10 Ball Bearing – YoYoExpert](http://shop.yoyoexpert.com/product/184/One-Drop-10-Ball-Bearing)
> > > >
> > > > [http://www.youtube.com/watch?v=01hNfVwhHW8](http://www.youtube.com/watch?v=01hNfVwhHW8)
> > >
> > > Just cause its crappy doesn’t mean it’s not going to fit.
> > >
> > > Besides, he said he has tried more than 1…
> >
> > I meant there might be gunk in the side of the bearing.
>
> He said it doesn’t fit. And won’t spin.
>
> Are we confused?
>
> Does the bearing spin in other yoyos?
Jeez! Chill out bro. Just trying to make sure EVERYTHING is ok before anyone makes a recommendation that won’t work for him.
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [June 2, 2013, 6:29pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/17 "2013-06-02T18:29:33Z")
yes all the bearings spin well in all my yoyos
---
### Author:  [@Noonar](https://forums.yoyoexpert.com/u/Noonar)
#### Post date: [June 2, 2013, 6:45pm UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/18 "2013-06-02T18:45:46Z")
It appears it’s a little rough. Might need sanded down some.
---
### Author:  [@Amberplop](https://forums.yoyoexpert.com/u/Amberplop)
#### Post date: [June 3, 2013, 3:56am UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/19 "2013-06-03T03:56:11Z")
How do i do that
---
### Author:  [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [June 3, 2013, 6:00am UTC](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355/20 "2013-06-03T06:00:34Z")
> [@Amberplop](#):
>
> How do i do that
You would need to take sand paper and wear it down.
Did you buy this yoyo used?
[Next page](https://forums.yoyoexpert.com/t/legacy-ii-trouble/54355.md?page=2)