# Led lights

**URL:** https://forums.yoyoexpert.com/t/led-lights/13971
**Category:** Yo-Yo Mods and Maintenance
**Created:** [May 2, 2010, 11:55am UTC](https://forums.yoyoexpert.com/t/led-lights/13971 "2010-05-02T11:55:46Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![sonotfair](https://avatars.discourse-cdn.com/v4/letter/s/858c86/32.png) [@sonotfair](https://forums.yoyoexpert.com/u/sonotfair)
#### Post date: [May 2, 2010, 11:55am UTC](https://forums.yoyoexpert.com/t/led-lights/13971/1 "2010-05-02T11:55:46Z")

</div>

Does anyone know how to put led lights in a flying panda or any yoyo for that matter.

---

<div class="post-metadata">

### Author: ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [May 2, 2010, 12:15pm UTC](https://forums.yoyoexpert.com/t/led-lights/13971/2 "2010-05-02T12:15:56Z")

</div>

It’s just trial and error. Most people just figure it out for the yoyo they are installing them into.

---

<div class="post-metadata">

### Author: ![cameron](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cameron/32/307_2.png) [@cameron](https://forums.yoyoexpert.com/u/cameron)
#### Post date: [May 5, 2010, 10:36pm UTC](https://forums.yoyoexpert.com/t/led-lights/13971/3 "2010-05-05T22:36:21Z")

</div>

Try taking off the caps. Attach one (or two if you can) LEDs to a CR 2032 and put it inside the caps and tape or glue em in?

---

<div class="post-metadata">

### Author: ![alzabo](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@alzabo](https://forums.yoyoexpert.com/u/alzabo)
#### Post date: [May 7, 2010, 12:46am UTC](https://forums.yoyoexpert.com/t/led-lights/13971/4 "2010-05-07T00:46:40Z")

</div>

> [@Cameron (and his yoyo)](#):
>
> Try taking off the caps. Attach one (or two if you can) LEDs to a CR 2032 and put it inside the caps and tape or glue em in?

You should add a resistor between the LED and battery.

---

<div class="post-metadata">

### Author: ![cameron](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cameron/32/307_2.png) [@cameron](https://forums.yoyoexpert.com/u/cameron)
#### Post date: [May 7, 2010, 12:55am UTC](https://forums.yoyoexpert.com/t/led-lights/13971/5 "2010-05-07T00:55:39Z")

</div>

> [@alzabo](#):
>
> > [@Cameron (and his yoyo)](#):
> >
> > Try taking off the caps. Attach one (or two if you can) LEDs to a CR 2032 and put it inside the caps and tape or glue em in?
> 
> You should add a resistor between the LED and battery.

Not really necessary, it wouldn’t blow out the LED.