# Large 1/2 spec bearings

**URL:** <https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323>\
**Category:** General Yo-Yo\
**Created:** [November 7, 2026, 3:19am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323 "2026-11-07T03:19:14Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Just\_another](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@Just\_another](https://forums.yoyoexpert.com/u/Just_another)\
**Post date:** [November 7, 2026, 3:19am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/1 "2026-11-07T03:19:14Z")

</div>

Howdy partners, any ideas where I can locate some large 1/2 spec bearings other the yyf, paying $6+ for a bearing is a bit aggressive in my mind. Maybe thick pads as well. Thanks.

---

<div class="post-metadata">

**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\
**Post date:** [November 7, 2026, 3:28am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/2 "2026-11-07T03:28:48Z")

</div>

you can get inexpensive bearings at fast eddy bearings

---

<div class="post-metadata">

**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\
**Post date:** [November 7, 2026, 3:37am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/3 "2026-11-07T03:37:51Z")

</div>

How many you need, I have a few

---

<div class="post-metadata">

**Author:** ![Just\_another](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@Just\_another](https://forums.yoyoexpert.com/u/Just_another)\
**Post date:** [November 7, 2026, 3:53am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/4 "2026-11-07T03:53:50Z")

</div>

Hey Kyle, 2-3. I’m not picky I’m going to mod the shutter sugar I was trying to sell, see if I can make them poppy for some 0A, and learning more tricks because it’s easier for me with a responsive

---

<div class="post-metadata">

**Author:** ![fradiger](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fradiger/32/66850_2.png) [@fradiger](https://forums.yoyoexpert.com/u/fradiger)\
**Post date:** [November 7, 2026, 4:19am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/5 "2026-11-07T04:19:38Z")

</div>

make sure you pick up some slightly shorter axles too, some wont close all the way with a half spec bearing

---

<div class="post-metadata">

**Author:** ![Just\_another](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@Just\_another](https://forums.yoyoexpert.com/u/Just_another)\
**Post date:** [November 7, 2026, 5:09am UTC](https://forums.yoyoexpert.com/t/large-1-2-spec-bearings/456323/6 "2026-11-07T05:09:01Z")

</div>

Yup, the shutter should be a simple off with the old in with the new (double checked that one 😀) I have to open up my sugar to figure out what length I’ll need