# kickside bearing 

**URL:** <https://forums.yoyoexpert.com/t/kickside-bearing/16770>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [July 16, 2010, 8:41pm UTC](https://forums.yoyoexpert.com/t/kickside-bearing/16770 "2010-07-16T20:41:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AwEsOmEnEsS](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@AwEsOmEnEsS](https://forums.yoyoexpert.com/u/AwEsOmEnEsS)\
**Post date:** [July 16, 2010, 8:41pm UTC](https://forums.yoyoexpert.com/t/kickside-bearing/16770/1 "2010-07-16T20:41:44Z")

</div>

I need to claen the bearing in my kickside but it wont come out  
so could i stick it in the frezzer so the bearing would come out easier?  
or would the plastic crack?

---

<div class="post-metadata">

**Author:** ![mikelz777](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@mikelz777](https://forums.yoyoexpert.com/u/mikelz777)\
**Post date:** [July 16, 2010, 10:08pm UTC](https://forums.yoyoexpert.com/t/kickside-bearing/16770/2 "2010-07-16T22:08:04Z")

</div>

Forget about the freezer. Get a wide rubber band (or something similar) to protect the surface edge of the bearing and then use a pliers to G-E-N-T-L-Y grip the bearing and gently wiggle it back and forth as you pull on it. The bearing should come right out.

---

<div class="post-metadata">

**Author:** ![AwEsOmEnEsS](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@AwEsOmEnEsS](https://forums.yoyoexpert.com/u/AwEsOmEnEsS)\
**Post date:** [July 16, 2010, 10:14pm UTC](https://forums.yoyoexpert.com/t/kickside-bearing/16770/3 "2010-07-16T22:14:38Z")

</div>

GOT IT

LOCKED