# Jetset ring 

**URL:** <https://forums.yoyoexpert.com/t/jetset-ring/47641>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [January 4, 2013, 3:56pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641 "2013-01-04T15:56:09Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![kkmaster](https://avatars.discourse-cdn.com/v4/letter/k/c5a1d2/32.png) [@kkmaster](https://forums.yoyoexpert.com/u/kkmaster)\
**Post date:** [January 4, 2013, 3:56pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/1 "2013-01-04T15:56:09Z")

</div>

How can I put it back the ring to my Jetset?

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [January 4, 2013, 4:08pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/2 "2013-01-04T16:08:34Z")

</div>

Have you tried just pushing it in? If it doesn’t stay in try some super glue.

---

<div class="post-metadata">

**Author:** ![kkmaster](https://avatars.discourse-cdn.com/v4/letter/k/c5a1d2/32.png) [@kkmaster](https://forums.yoyoexpert.com/u/kkmaster)\
**Post date:** [January 4, 2013, 4:09pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/3 "2013-01-04T16:09:53Z")

</div>

the material is too hard to squeeze the ring fit into the groove

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [January 4, 2013, 4:16pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/4 "2013-01-04T16:16:21Z")

</div>

Try putting the ring in the freezer for 30 minutes, then give it a shot while it’s cold. That should shrink it a bit and it may be enough to do it. You may have to force it. Also take the yoyo apart so you can apply good pressure against a table.

---

<div class="post-metadata">

**Author:** ![Yonut](https://avatars.discourse-cdn.com/v4/letter/y/5f8ce5/32.png) [@Yonut](https://forums.yoyoexpert.com/u/Yonut)\
**Post date:** [January 5, 2013, 1:28am UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/5 "2013-01-05T01:28:09Z")

</div>

Only glue it as a last resort. If the ring is in there that tight its placement being changed could effect play.

---

<div class="post-metadata">

**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\
**Post date:** [January 5, 2013, 4:47pm UTC](https://forums.yoyoexpert.com/t/jetset-ring/47641/6 "2013-01-05T16:47:51Z")

</div>

Don’t use glue if it does not fit in all the way, it will hang out ruin it and cause wobble.