# Jammed Bearing
**URL:** https://forums.yoyoexpert.com/t/jammed-bearing/8915
**Category:** Yo-Yo Mods and Maintenance
**Created:** [December 5, 2009, 7:19pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915 "2009-12-05T19:19:15Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Xyjiryo](https://forums.yoyoexpert.com/u/Xyjiryo)
#### Post date: [December 5, 2009, 7:19pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915/1 "2009-12-05T19:19:15Z")
My bearing is jammed on my yo-yo. But all other instances, peoples’ bearings have been stuck on the non-axle side, while mine is stuck on the actual axle. This is my first yo-yo (Velocity V.3), and I’ve tried the freezing method to no avail. Any tips?
---
### Author:  [@theOldestCraze](https://forums.yoyoexpert.com/u/theOldestCraze)
#### Post date: [December 5, 2009, 7:50pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915/2 "2009-12-05T19:50:53Z")
> **[Best way to get the bearing out of a Peak?](https://forums.yoyoexpert.com/forums/index.php/topic,8548.msg94405.html)**
>
> Stuck bearings are signs of tight tolerances. As soon as I beat the hell out of my yo-yos, the bearing comes loose more easily. Just pliers. p.s. that’s my face in mirror image… looks strange.
This works well with about any yo-yo bearing that is fit tightly to it’s bearing seat. I bet if you try the pictured method in this thread, you will also pull out the spacer. If you pull both out, and they are still attached to eachother, it’s not a big deal (you can clean the bearing all the same).
I do not immediately see why you need to remove the bearing on your Velocity… why are you so intent on getting it off? Is it locked (thin lube will fix that, and you don’t need to remove the bearing to apply it)? Do you just want to replace the bearing without a reason?
I have found removing the bearing from a tight-fitting seat or spacer will loosen the connection between the two and lead to a less-true spin.
-Jacob
---
### Author:  [@Xyjiryo](https://forums.yoyoexpert.com/u/Xyjiryo)
#### Post date: [December 5, 2009, 8:01pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915/3 "2009-12-05T20:01:27Z")
I had opened my Velocity before to fix a string knot, so I remember the bearing also coming out. After messing up a trick though, my string had got caught between the bearing and the inside of the seat. I sequentially broke my string trying to unjam the bearing. I had just wanted to unjam the bearing to clean the inward side in case there was some kind of gunk on it. I tried using pliers, yet still no use.
---
### Author:  [@Xyjiryo](https://forums.yoyoexpert.com/u/Xyjiryo)
#### Post date: [December 5, 2009, 8:34pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915/4 "2009-12-05T20:34:02Z")
Nevermind, I decided I’m just going to return it and buy another one. When my bearing does decide to need replacing, I don’t want to get screwed over. Thanks for your help.
---
### Author:  [@Yummy](https://forums.yoyoexpert.com/u/Yummy)
#### Post date: [December 5, 2009, 8:53pm UTC](https://forums.yoyoexpert.com/t/jammed-bearing/8915/5 "2009-12-05T20:53:34Z")
Why return it? It was your fault it’s screwed up. A store should have to pick up tab for that.