# It's so wide. What am I gonna do????? (Another CAD) **URL:** \ **Category:** Unrelated Discussion\ **Created:** [January 16, 2011, 1:54am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867 "2011-01-16T01:54:49Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![DG1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dg1/32/606_2.png) [@DG1](https://forums.yoyoexpert.com/u/DG1)\ **Post date:** [January 16, 2011, 1:54am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/1 "2011-01-16T01:54:49Z")
You’d be surprised how fast making these are. Again, not sure whether to release under DTT in the future, or keep as a possible personal project. ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/0/d/8/0d81dac0fc95379a0a64ac64cdbdeadd6b9e3a33.png) ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/2/f/12f62763fb3090a1cff82a06baccbaeb0b470817.png) Diameter: 53.61mm Width: 56.69mm Weight: Approx. 64.52g Bearing: C Response: Sili Groove inb4making100designsaweekisn’tgood. Remember, these are for fun, and, if I do happen to make one, I will be sure it’s what it shoul be (Which I already do to start w/.) ---
**Author:** ![quinton](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/quinton/32/376_2.png) [@quinton](https://forums.yoyoexpert.com/u/quinton)\ **Post date:** [January 16, 2011, 2:03am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/2 "2011-01-16T02:03:38Z")
> [@DG1](#): > > inb4making100designsaweekisn’tgood. It’s not that we don’t like seeing you make these designs, it’s that you post so many tat the boards get cluttered. One central thread for everything is the way to go, I assure you. ---
**Author:** ![DG1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dg1/32/606_2.png) [@DG1](https://forums.yoyoexpert.com/u/DG1)\ **Post date:** [January 16, 2011, 2:04am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/3 "2011-01-16T02:04:50Z")
> [@Q](#): > > > [@DG1](#): > > > > inb4making100designsaweekisn’tgood. > > It’s not that we don’t like seeing you make these designs, it’s that you post so many tat the boards get cluttered. One central thread for everything is the way to go, I assure you. Of course :wink: After this particular thread here, I’m making an archive of my current CAD’s. ---
**Author:** ![titanium221](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/titanium221/32/174_2.png) [@titanium221](https://forums.yoyoexpert.com/u/titanium221)\ **Post date:** [January 16, 2011, 2:12am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/4 "2011-01-16T02:12:21Z")
how do you get the weight right using scetch lines? ---
**Author:** ![DG1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dg1/32/606_2.png) [@DG1](https://forums.yoyoexpert.com/u/DG1)\ **Post date:** [January 16, 2011, 2:16am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/5 "2011-01-16T02:16:01Z")
> [@titanium221](#): > > how do you get the weight right using scetch lines? I make a sketch, use the revolve, set the material, and I can click evaluate \> mass properties. The particular weight for each half w/o a bearing or axle for this is 31.26g ---
**Author:** ![titanium221](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/titanium221/32/174_2.png) [@titanium221](https://forums.yoyoexpert.com/u/titanium221)\ **Post date:** [January 16, 2011, 2:28am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/6 "2011-01-16T02:28:32Z")
> [@DG1](#): > > > [@titanium221](#): > > > > how do you get the weight right using scetch lines? > > I make a sketch, use the revolve, set the material, and I can click evaluate \> mass properties. > > The particular weight for each half w/o a bearing or axle for this is 31.26g yeah, I can do that, but its just trial and error until you get it? btw, yoyoskeel SOLID. check it out. ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/7/a/a7ac4aed33027654e6c22f181dc76b3f15aa91fd.jpeg) ---
**Author:** ![DG1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dg1/32/606_2.png) [@DG1](https://forums.yoyoexpert.com/u/DG1)\ **Post date:** [January 16, 2011, 2:46am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/7 "2011-01-16T02:46:34Z")
> [@titanium221](#): > > > [@DG1](#): > > > > > [@titanium221](#): > > > > > > how do you get the weight right using scetch lines? > > > > I make a sketch, use the revolve, set the material, and I can click evaluate \> mass properties. > > > > The particular weight for each half w/o a bearing or axle for this is 31.26g > > yeah, I can do that, but its just trial and error until you get it? > > btw, yoyoskeel SOLID. check it out. > > [http://3.bp.blogspot.com/\_G\_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658\_477258427049\_370292487049\_6574083\_2338931\_o.jpg](http://3.bp.blogspot.com/_G_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658_477258427049_370292487049_6574083_2338931_o.jpg) Similar, but not the same :wink: ---
**Author:** ![JeiCheetah](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jeicheetah/32/612192_2.png) [@JeiCheetah](https://forums.yoyoexpert.com/u/JeiCheetah)\ **Post date:** [January 16, 2011, 7:08am UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/8 "2011-01-16T07:08:46Z")
> [@DG1](#): > > > [@titanium221](#): > > > > > [@DG1](#): > > > > > > > [@titanium221](#): > > > > > > > > how do you get the weight right using scetch lines? > > > > > > I make a sketch, use the revolve, set the material, and I can click evaluate \> mass properties. > > > > > > The particular weight for each half w/o a bearing or axle for this is 31.26g > > > > yeah, I can do that, but its just trial and error until you get it? > > > > btw, yoyoskeel SOLID. check it out. > > > > [http://3.bp.blogspot.com/\_G\_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658\_477258427049\_370292487049\_6574083\_2338931\_o.jpg](http://3.bp.blogspot.com/_G_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658_477258427049_370292487049_6574083_2338931_o.jpg) > > Similar, and also the same :wink: Fixed. ---
**Author:** ![DG1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dg1/32/606_2.png) [@DG1](https://forums.yoyoexpert.com/u/DG1)\ **Post date:** [January 16, 2011, 3:51pm UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/9 "2011-01-16T15:51:06Z")
> [@Jayyo](#): > > > [@DG1](#): > > > > > [@titanium221](#): > > > > > > > [@DG1](#): > > > > > > > > > [@titanium221](#): > > > > > > > > > > how do you get the weight right using scetch lines? > > > > > > > > I make a sketch, use the revolve, set the material, and I can click evaluate \> mass properties. > > > > > > > > The particular weight for each half w/o a bearing or axle for this is 31.26g > > > > > > yeah, I can do that, but its just trial and error until you get it? > > > > > > btw, yoyoskeel SOLID. check it out. > > > > > > [http://3.bp.blogspot.com/\_G\_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658\_477258427049\_370292487049\_6574083\_2338931\_o.jpg](http://3.bp.blogspot.com/_G_1IOX62g2E/TS79-0kI3KI/AAAAAAAAGj8/Xf8gymfqgPA/s1600/131658_477258427049_370292487049_6574083_2338931_o.jpg) > > > > Similar, and also the same :wink: > > Fixed. Then I will trash it if you feel that way. Not that hard. ---
**Author:** ![Troy\_oyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/troy_oyo/32/340_2.png) [@Troy\_oyo](https://forums.yoyoexpert.com/u/Troy_oyo)\ **Post date:** [January 16, 2011, 4:09pm UTC](https://forums.yoyoexpert.com/t/its-so-wide-what-am-i-gonna-do-another-cad/22867/10 "2011-01-16T16:09:53Z")
Interesting design, I’m not a fan of the really wide yoyos coming out today though. Also, you cant inb4 your own post.