# I know you wont beleive me but...

**URL:** <https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [July 20, 2013, 11:34pm UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789 "2013-07-20T23:34:33Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\
**Post date:** [July 20, 2013, 11:34pm UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/1 "2013-07-20T23:34:33Z")

</div>

THIS IS NOT NORMAL

The bearing in my Sine // Saw is broken. And very stuck. I coould get a bearing out of an oscrillatrix, g funk, Angle, and popstar but this is bad.

I think theres something wrong. Freezing and wiggling and prying with a knife occasionally has yet to fail me.

I heard that holding the tool with pliers will work, but it is on the side with the axle.

So can someone either tell me some crazy way to get out bearings or how to remove stax?

I have also tried supbreh’s WD40 Method.

---

<div class="post-metadata">

**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\
**Post date:** [July 20, 2013, 11:42pm UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/2 "2013-07-20T23:42:40Z")

</div>

Use the end of a drill bit that’s the size of the inner diameter of the bearing. Worst comes to worst, just send the yoyo to me and I can get the bearing out for just shipping back.

---

<div class="post-metadata">

**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\
**Post date:** [July 21, 2013, 12:05am UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/3 "2013-07-21T00:05:06Z")

</div>

> [@yoyospirit](#):
>
> Use the end of a drill bit that’s the size of the inner diameter of the bearing. Worst comes to worst, just send the yoyo to me and I can get the bearing out for just shipping back.

I cant, the axle is in the way. How do i remove the stax?

---

<div class="post-metadata">

**Author:** ![yoyospirit](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyospirit/32/219875_2.png) [@yoyospirit](https://forums.yoyoexpert.com/u/yoyospirit)\
**Post date:** [July 21, 2013, 12:46am UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/4 "2013-07-21T00:46:01Z")

</div>

> [@Apollo2](#):
>
> > [@yoyospirit](#):
> >
> > Use the end of a drill bit that’s the size of the inner diameter of the bearing. Worst comes to worst, just send the yoyo to me and I can get the bearing out for just shipping back.
> 
> I cant, the axle is in the way. How do i remove the stax?

Take a hammer and lightly tap the axle until you feel the STAX fall out.

---

<div class="post-metadata">

**Author:** ![nardcopter](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nardcopter/32/1335_2.png) [@nardcopter](https://forums.yoyoexpert.com/u/nardcopter)\
**Post date:** [July 21, 2013, 12:53am UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/5 "2013-07-21T00:53:54Z")

</div>

I push them against the table until it pops out, but that can be dangerous.

---

<div class="post-metadata">

**Author:** ![Apollo2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apollo2/32/1285_2.png) [@Apollo2](https://forums.yoyoexpert.com/u/Apollo2)\
**Post date:** [July 21, 2013, 12:56am UTC](https://forums.yoyoexpert.com/t/i-know-you-wont-beleive-me-but/56789/6 "2013-07-21T00:56:51Z")

</div>

Thx guys. I GOT IT OUT!!! WOOOOOOOOOOOOOOOO