# Hubstack Help!!!!

**URL:** <https://forums.yoyoexpert.com/t/hubstack-help/27455>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [June 21, 2011, 3:01am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455 "2011-06-21T03:01:07Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gerard897](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gerard897/32/893_2.png) [@Gerard897](https://forums.yoyoexpert.com/u/Gerard897)\
**Post date:** [June 21, 2011, 3:01am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/1 "2011-06-21T03:01:07Z")

</div>

I opened my grind machine to look whats inside and took the axle off. I took off the hubstack (meaning one) and I accidentally took off the o ring. And the bearing is stuck into the hubstack itself. And it is impossible to get the bearing out. I put back the whole habstack (including the bearing) but it keeps falling off. I know you have to put the o ring back on but it is impossible!!!

---

<div class="post-metadata">

**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\
**Post date:** [June 21, 2011, 3:58am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/2 "2011-06-21T03:58:14Z")

</div>

Try using tweezers and make sure you are putting the hubstacks back together in this order: bearing, o-ring, then plastic stack.

---

<div class="post-metadata">

**Author:** ![Gerard897](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gerard897/32/893_2.png) [@Gerard897](https://forums.yoyoexpert.com/u/Gerard897)\
**Post date:** [June 21, 2011, 4:03am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/3 "2011-06-21T04:03:22Z")

</div>

The bearing is stuck 2 the plastic hubstack part thing 😢

---

<div class="post-metadata">

**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\
**Post date:** [June 21, 2011, 4:10am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/4 "2011-06-21T04:10:16Z")

</div>

You can use the tip of a pen or pencil to push it out.

---

<div class="post-metadata">

**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\
**Post date:** [June 21, 2011, 9:04am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/5 "2011-06-21T09:04:57Z")

</div>

when my bearing comes off with my rice stacks, I just use the yoyo’s axle to push it out from the other side. (like through the whole on the top)

---

<div class="post-metadata">

**Author:** ![Gerard897](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gerard897/32/893_2.png) [@Gerard897](https://forums.yoyoexpert.com/u/Gerard897)\
**Post date:** [June 22, 2011, 6:25am UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/6 "2011-06-22T06:25:14Z")

</div>

@mrcnja It is basically stuck, like glued, TIGHT. It is like it is super glued. I’ post a picture when someone replays.

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [June 22, 2011, 3:29pm UTC](https://forums.yoyoexpert.com/t/hubstack-help/27455/7 "2011-06-22T15:29:23Z")

</div>

Then you aren’t pushing hard enough. put the pencil erasure side on a table or counter. Then put the bearing on the pencil. Now push. this will keep you from pushing the bearing onto the table and not out of the stack.