# HSPIN ENVY64  pads? No recess!!

**URL:** <https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [April 10, 2013, 10:57pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090 "2013-04-10T22:57:00Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\
**Post date:** [April 10, 2013, 10:57pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/1 "2013-04-10T22:57:00Z")

</div>

I got a Envy64 and I’m not a fan of the Stocker Response.

I’m pretty sure Friction Stickers fit but I’d rather have something els.

Is there enough depth for a Recess or silicone groove?

---

<div class="post-metadata">

**Author:** ![augmentedloyalty](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/augmentedloyalty/32/1218_2.png) [@augmentedloyalty](https://forums.yoyoexpert.com/u/augmentedloyalty)\
**Post date:** [April 10, 2013, 11:31pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/2 "2013-04-10T23:31:25Z")

</div>

No sili wont work so you have to use Ethier Duncan sili stickers or diff .555 pads

---

<div class="post-metadata">

**Author:** ![TheYoYoist101](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/theyoyoist101/32/842_2.png) [@TheYoYoist101](https://forums.yoyoexpert.com/u/TheYoYoist101)\
**Post date:** [April 10, 2013, 11:33pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/3 "2013-04-10T23:33:49Z")

</div>

When I owned a 64 I found Dif .555 pads worked best.

---

<div class="post-metadata">

**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\
**Post date:** [April 10, 2013, 11:36pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/4 "2013-04-10T23:36:31Z")

</div>

Is there enough depth of metal to use a lathe and make a groove for silicone?

---

<div class="post-metadata">

**Author:** ![augmentedloyalty](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/augmentedloyalty/32/1218_2.png) [@augmentedloyalty](https://forums.yoyoexpert.com/u/augmentedloyalty)\
**Post date:** [April 10, 2013, 11:38pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/5 "2013-04-10T23:38:28Z")

</div>

> [@Bcmaddog](#):
>
> Is there enough depth if metal to use a lathe and make a groove for silicone?

maybe but wouldn’t try risking it if It were to get severe vibe or something

---

<div class="post-metadata">

**Author:** ![TheYoYoist101](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/theyoyoist101/32/842_2.png) [@TheYoYoist101](https://forums.yoyoexpert.com/u/TheYoYoist101)\
**Post date:** [April 10, 2013, 11:40pm UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/6 "2013-04-10T23:40:06Z")

</div>

> [@Bcmaddog](#):
>
> Is there enough depth of metal to use a lathe and make a groove for silicone?

Just rock pads or get rid of it. I never was fond of the envy 64 myself However I did enjoy its big brother the OG envy.

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [April 11, 2013, 12:09am UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/7 "2013-04-11T00:09:35Z")

</div>

Duncan sili pads ( 13.7 mm size) will work.

---

<div class="post-metadata">

**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\
**Post date:** [April 11, 2013, 12:25am UTC](https://forums.yoyoexpert.com/t/hspin-envy64-pads-no-recess/52090/8 "2013-04-11T00:25:43Z")

</div>

> [@jhb8426](#):
>
> Duncan sili pads ( 13.7 mm size) will work.

Thanks!!