# How do I make my Hitman unresponsive?

**URL:** https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430
**Category:** General Yo-Yo
**Created:** [January 18, 2010, 1:17pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430 "2010-01-18T13:17:46Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![EWE](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/ewe/32/404_2.png) [@EWE](https://forums.yoyoexpert.com/u/EWE)
#### Post date: [January 18, 2010, 1:17pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430/1 "2010-01-18T13:17:46Z")

</div>

How do I make my Hitman unresponsive??? I have a o-ring on one side and flowable silicone on the other. Thin lube dosn’t seem to be working. HELP!!!

---

<div class="post-metadata">

### Author: ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [January 18, 2010, 1:45pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430/2 "2010-01-18T13:45:45Z")

</div>

Clean your bearing. Then make sure that it is dry of all of the cleaning solution. Then put the smallest amount of thin lube in your bearing. I mean like 1/8th of a drop. Then play with it like a mad man.

---

<div class="post-metadata">

### Author: ![Peaceful](https://avatars.discourse-cdn.com/v4/letter/p/bc79bd/32.png) [@Peaceful](https://forums.yoyoexpert.com/u/Peaceful)
#### Post date: [January 18, 2010, 1:53pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430/3 "2010-01-18T13:53:21Z")

</div>

Well, It’s easy since you have that kind of response system.

Since you already put a thin lube on the bearing, let it break in.

It means that the lube that you put is now “soaked” the balls inside, causing the bearing spin freely and the yo-yo is now unresponsive.

So take note that breaking it in takes time, don’t be really excited. 🙂

---

<div class="post-metadata">

### Author: ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)
#### Post date: [January 18, 2010, 1:58pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430/4 "2010-01-18T13:58:27Z")

</div>

Well now all depends on how much lube he put in there. If he put two drops it will take weeks to break it in.

---

<div class="post-metadata">

### Author: ![dianaji](https://avatars.discourse-cdn.com/v4/letter/d/e5b9ba/32.png) [@dianaji](https://forums.yoyoexpert.com/u/dianaji)
#### Post date: [January 18, 2010, 5:12pm UTC](https://forums.yoyoexpert.com/t/how-do-i-make-my-hitman-unresponsive/10430/5 "2010-01-18T17:12:57Z")

</div>

both sides should be flowable silicone use thin lube but only apply thin lube when the bearing is %100 cleaned