# Help with Die-Nasty spacers!
**URL:** https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064
**Category:** Yo-Yo Mods and Maintenance
**Created:** [January 23, 2011, 9:31pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064 "2011-01-23T21:31:37Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@thegodofyoyo](https://forums.yoyoexpert.com/u/thegodofyoyo)
#### Post date: [January 23, 2011, 9:31pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/1 "2011-01-23T21:31:37Z")
Okay, I got my Die-Nasty 2 days ago and was very pleased with it, besides the fact that it is very loud, anyways I used it quite a bit. Then all of the sudden it became very responsive, I checked everything I could and I narrowed it down to one thing, the spacers. I opened up the yoyo and took the first spacer out, then when I tried pull the bearing out it was stuck, so after a while it finally came out, but one problem, the other spacer was stuck to it and I can’t get it out of the bearing…
Any tips?
P.S I’m think this problem originated when my friend over tightened the yoyo.
Much thanks
---
### Author:  [@Schnayke](https://forums.yoyoexpert.com/u/Schnayke)
#### Post date: [January 23, 2011, 9:38pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/2 "2011-01-23T21:38:49Z")
Don’t blame your friend. The bearings spacer has a very tight tollerance.
[ ](https://www.youtube.com/watch?v=INyRFN49_qc)
---
### Author:  [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [January 23, 2011, 9:40pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/3 "2011-01-23T21:40:36Z")
[EDIT: ninjaed^^^]
YYF spacers are known to be stuck on the bearing pretty good. You get them off by prying something between the spacer and the bearing. Some people use a tack for this.
---
### Author:  [@thegodofyoyo](https://forums.yoyoexpert.com/u/thegodofyoyo)
#### Post date: [January 23, 2011, 9:41pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/4 "2011-01-23T21:41:42Z")
Thank you very much! But one problem! I’m only 14 and I DON’T HAVE ADULT SUPERVISION!!! lol!
---
### Author:  [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [January 23, 2011, 9:43pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/5 "2011-01-23T21:43:13Z")
Then implore one of your caretakers to do it. :wink:
---
### Author:  [@thegodofyoyo](https://forums.yoyoexpert.com/u/thegodofyoyo)
#### Post date: [January 23, 2011, 9:47pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/6 "2011-01-23T21:47:55Z")
Okay I took the spacers off and checked for obstructions and put them back and my Die-Nasty is still very loud and very responsive… any sugestions?
---
### Author:  [@Yummy](https://forums.yoyoexpert.com/u/Yummy)
#### Post date: [January 23, 2011, 9:48pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/7 "2011-01-23T21:48:39Z")
Try cleaning and lubing the bearing.
---
### Author:  [@thegodofyoyo](https://forums.yoyoexpert.com/u/thegodofyoyo)
#### Post date: [January 23, 2011, 9:51pm UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/8 "2011-01-23T21:51:30Z")
Alright, I’ll give it a shot, I just didn’t think I’d need to after 2 days of play, I never cleaned my DM bearing until last week and I had had it about 2 years
---
### Author:  [@yoyofoot](https://forums.yoyoexpert.com/u/yoyofoot)
#### Post date: [January 24, 2011, 1:30am UTC](https://forums.yoyoexpert.com/t/help-with-die-nasty-spacers/23064/9 "2011-01-24T01:30:53Z")
I’ve had the same problem with over responsive bearings, just clean it, mine had something stuck in it apparently, no problems anymore. The spacers on my glow-nasty were BEYOND stuck, I tried literally a couple hours with push pins, etc. I eventually put the bearing on a larger axle with the spacer above it, and pried it off with a knife. The axle was larger than the hole in the space, yet smaller than the hole in the bearing. I’m glad you didn’t have this bad of a problem…