# Fusion 360 How to cut sides down

**URL:** <https://forums.yoyoexpert.com/t/fusion-360-how-to-cut-sides-down/330798>\
**Category:** General Yo-Yo\
**Created:** [December 5, 2020, 6:56pm UTC](https://forums.yoyoexpert.com/t/fusion-360-how-to-cut-sides-down/330798 "2020-12-05T18:56:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DrAGoni\_Penguin](https://avatars.discourse-cdn.com/v4/letter/d/b2d939/32.png) [@DrAGoni\_Penguin](https://forums.yoyoexpert.com/u/DrAGoni_Penguin)\
**Post date:** [December 5, 2020, 6:56pm UTC](https://forums.yoyoexpert.com/t/fusion-360-how-to-cut-sides-down/330798/1 "2020-12-05T18:56:35Z")

</div>

Hi, I’m using Fusion 360, and I was wondering how do I cut the rims down a bit?  
I just used a big cylinder and divided it by half.  
Heres a pic of what I got so far.  
I’m trying to cut the wider rims down so it becomes sort of like the horizon like the blue yoyo image.  
I have the pink one so far.  
How do I cut it down?  
Thanks!

 ![Screenshot 2020-12-05 125535](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/0/6/706c3eca8e42568181aac8c42b337df21ef95cac.png) ![Screenshot 2020-12-05 125330](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/f/4/8/f4801a1fe1014b587fd3adad9f357bde1ae54050.jpeg)

---

<div class="post-metadata">

**Author:** ![hobbygod](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hobbygod/32/120997_2.png) [@hobbygod](https://forums.yoyoexpert.com/u/hobbygod)\
**Post date:** [December 5, 2020, 7:02pm UTC](https://forums.yoyoexpert.com/t/fusion-360-how-to-cut-sides-down/330798/2 "2020-12-05T19:02:26Z")

</div>

Draw lines until you get it how you like and then use the fillet tool to make the cuts as soft as you want.

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [December 5, 2020, 9:40pm UTC](https://forums.yoyoexpert.com/t/fusion-360-how-to-cut-sides-down/330798/3 "2020-12-05T21:40:54Z")

</div>

> [@DrAGoni\_Penguin](#):
>
> Hi, I’m using Fusion 360, and I was wondering how do I cut the rims down a bit?  
> I just used a big cylinder and divided it by half.

It’s much easier to start with a 2d sketch of 1/4 of the cross section and revolve it to create the 3d body (you can then mirror it to get the other half of the yoyo). It gives you a lot more control over the weight distribution and shape.
