# Fluid 3d printing spacers

**URL:** <https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029>\
**Category:** General Yo-Yo\
**Created:** [April 17, 2022, 4:50pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029 "2022-04-17T16:50:27Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yoyobob123321](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyobob123321/32/146914_2.png) [@Yoyobob123321](https://forums.yoyoexpert.com/u/Yoyobob123321)\
**Post date:** [April 17, 2022, 4:50pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/1 "2022-04-17T16:50:27Z")

</div>

Can you take them out and 3d prints new yoyo and use them on that yoyo or do they have to stay in the same yo-yo forever?

---

<div class="post-metadata">

**Author:** ![TheThrowingGnome](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/thethrowinggnome/32/14231_2.png) [@TheThrowingGnome](https://forums.yoyoexpert.com/u/TheThrowingGnome)\
**Post date:** [April 17, 2022, 5:10pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/2 "2022-04-17T17:10:24Z")

</div>

Haven’t tried them, but I’d guess you can remove them.

---

<div class="post-metadata">

**Author:** ![Yoyobob123321](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyobob123321/32/146914_2.png) [@Yoyobob123321](https://forums.yoyoexpert.com/u/Yoyobob123321)\
**Post date:** [April 17, 2022, 9:43pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/3 "2022-04-17T21:43:23Z")

</div>

Ok?:thinking::thinking:

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [April 18, 2022, 1:37am UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/4 "2022-04-18T01:37:26Z")

</div>

Yes.

---

<div class="post-metadata">

**Author:** ![Yoyobob123321](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyobob123321/32/146914_2.png) [@Yoyobob123321](https://forums.yoyoexpert.com/u/Yoyobob123321)\
**Post date:** [April 18, 2022, 1:12pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/5 "2022-04-18T13:12:59Z")

</div>

Yes to what?

---

<div class="post-metadata">

**Author:** ![Kray](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kray/32/92176_2.png) [@Kray](https://forums.yoyoexpert.com/u/Kray)\
**Post date:** [April 18, 2022, 1:19pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/6 "2022-04-18T13:19:10Z")

</div>

Yes you can change them no problem I own 3 pair.  
But buy a couple it is really annoying if you like one of your models and you always have to swap.  
And get a couple of different length M4 grub screws do give you a bit more design freedom.

---

<div class="post-metadata">

**Author:** ![bheinz63](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bheinz63/32/137310_2.png) [@bheinz63](https://forums.yoyoexpert.com/u/bheinz63)\
**Post date:** [April 18, 2022, 4:55pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/7 "2022-04-18T16:55:22Z")

</div>

Yes they can be removed. they’re just brass discs, an M4 bolt, and hex nuts.

---

<div class="post-metadata">

**Author:** ![Yoyobob123321](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyobob123321/32/146914_2.png) [@Yoyobob123321](https://forums.yoyoexpert.com/u/Yoyobob123321)\
**Post date:** [April 18, 2022, 7:32pm UTC](https://forums.yoyoexpert.com/t/fluid-3d-printing-spacers/356029/8 "2022-04-18T19:32:03Z")

</div>

Thanks for all the help!