# Flowable silicone silliness

**URL:** <https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [November 16, 2022, 6:24pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962 "2022-11-16T18:24:35Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Albertino](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/albertino/32/302953_2.png) [@Albertino](https://forums.yoyoexpert.com/u/Albertino)\
**Post date:** [November 21, 2022, 1:18pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/21 "2022-11-21T13:18:36Z")

</div>

The error I made was probably on not put it inside the recess with a syringe as I used to do (I was just very curious to try it) and then I used the credit card but didn’t smooth out properly cause the application was bad fore sure.  
I will try again when I receive the syringe (I had to order them from amazon as in Uk seems impossible to buy a syringe without people looking at you like a criminal)

---

<div class="post-metadata">

**Author:** ![ENGLISH\_TEA](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/english_tea/32/199940_2.png) [@ENGLISH\_TEA](https://forums.yoyoexpert.com/u/ENGLISH_TEA)\
**Post date:** [November 21, 2022, 3:28pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/22 "2022-11-21T15:28:21Z")

</div>

The way I’ve been doing it is to get the recess full then I actually use my finger and just for all the way around. Wipe off the excess. It’s messy but it’s turning out nice

---

<div class="post-metadata">

**Author:** ![Albertino](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/albertino/32/302953_2.png) [@Albertino](https://forums.yoyoexpert.com/u/Albertino)\
**Post date:** [November 22, 2022, 9:50am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/23 "2022-11-22T09:50:21Z")

</div>

It eventually smooth out a little bit playing it around 4/5 hours but I think I will do it in another yoyo just to go back on track with siliconing, I have been lazy for long using the standard pads but the response of the silicone is the best for me.  
Today I will receive the syringe and do it on a Yoyofactory R-type that I use a lot

 ![PXL_20221121_204206946~2](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/3/2/1/32142e3cb1d949e7a6ed3c39bd2541dc13c6f2e1.jpeg)

---

<div class="post-metadata">

**Author:** ![ENGLISH\_TEA](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/english_tea/32/199940_2.png) [@ENGLISH\_TEA](https://forums.yoyoexpert.com/u/ENGLISH_TEA)\
**Post date:** [November 22, 2022, 3:29pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/24 "2022-11-22T15:29:11Z")

</div>

Nice! I need to do more too

---

<div class="post-metadata">

**Author:** ![adamantiumpops](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/adamantiumpops/32/198285_2.png) [@adamantiumpops](https://forums.yoyoexpert.com/u/adamantiumpops)\
**Post date:** [November 22, 2022, 4:42pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/25 "2022-11-22T16:42:31Z")

</div>

If there are two things I have in modern yoyo it’s OD 10-Ball Flats, and Snow Tires. Which is a bummer because I love OD and CLYW, lol. Just flowed some clear permatex into my mostly-new Manatee. We’ll see tomorrow how I did but it looks pretty good right now!

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/e/1/1/e117c4e7b369dae2d3b70873dfc7c510090598ed.jpeg)

---

<div class="post-metadata">

**Author:** ![JDyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jdyo/32/199646_2.png) [@JDyo](https://forums.yoyoexpert.com/u/JDyo)\
**Post date:** [November 22, 2022, 5:14pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/26 "2022-11-22T17:14:57Z")

</div>

Thank you, that’s flowable in the picture (monkey snot) its way easier to work with, you should get better results with the syringe. Dylan has some good tips here [https://www.youtube.com/watch?v=HmHcUK1hGNc](https://www.youtube.com/watch?v=HmHcUK1hGNc)

And this is exactly how I do the monkey snot [https://www.youtube.com/watch?v=NYIFX85QTwE](https://www.youtube.com/watch?v=NYIFX85QTwE)

---

<div class="post-metadata">

**Author:** ![JDyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jdyo/32/199646_2.png) [@JDyo](https://forums.yoyoexpert.com/u/JDyo)\
**Post date:** [November 22, 2022, 5:15pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/27 "2022-11-22T17:15:21Z")

</div>

Lookin’ good

---

<div class="post-metadata">

**Author:** ![adamantiumpops](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/adamantiumpops/32/198285_2.png) [@adamantiumpops](https://forums.yoyoexpert.com/u/adamantiumpops)\
**Post date:** [November 23, 2022, 3:09pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/28 "2022-11-23T15:09:35Z")

</div>

Thanks! After a brief cleanup of the bearing seat, this Manatee is like a whole new yoyo! Why TF would anyone ever use snow tires?

---

<div class="post-metadata">

**Author:** ![mable](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mable/32/194074_2.png) [@mable](https://forums.yoyoexpert.com/u/mable)\
**Post date:** [November 23, 2022, 3:17pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/29 "2022-11-23T15:17:50Z")

</div>

They make throws and binds feel good. I’m not sure if you’re bothered by flush response pads or 21mm response, if you flow silicone into a 21mm response groove you’re still getting the feel of 21mm response. If you’re conflating snow tires as just being a smaller than normal gap width, then yeah a silicone recess will give you a wider gap.

I’ve siliconed almost all of my 19mm response size yoyos but I’ve left my CLYWs alone because I like how snow tires feel.

---

<div class="post-metadata">

**Author:** ![adamantiumpops](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/adamantiumpops/32/198285_2.png) [@adamantiumpops](https://forums.yoyoexpert.com/u/adamantiumpops)\
**Post date:** [November 23, 2022, 3:32pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/30 "2022-11-23T15:32:26Z")

</div>

Yeah I figured that was the answer, and to each their own! I’ve said it before and I’ll say it again; give me slippy or give me death. I’d rather bind 6 times on purpose than once on accident haha.

---

<div class="post-metadata">

**Author:** ![Vision821](https://avatars.discourse-cdn.com/v4/letter/v/dec6dc/32.png) [@Vision821](https://forums.yoyoexpert.com/u/Vision821)\
**Post date:** [November 9, 2025, 5:03am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/31 "2025-11-09T05:03:59Z")

</div>

When you smooth it, whether it is a card or your finger or whatever, dip it in water first and be generous. This makes a world of a difference. I learned this from Dylan Kowalski. On a side note, the flow-able silicone is what I use, it’s the best, it’s so easy to take out, too, and replace. That red RTV can be a nightmare to get out, a whole hassle. Flowable self levels, too.

That’s not that bad though bro, the string will smooth it out eventually, anyways. Glad to see all you still siliconing, I love it. When you’re done with the tip put two tooth picks in the bottom, and set it up-right and you can just pull the toothpicks next time and remove the silicone from the tip easier. Also stand up your tubes, this makes a huge difference. (learned from Jake G2 who has the best tutorial for flowable on youtube hands down)

---

<div class="post-metadata">

**Author:** ![Vision821](https://avatars.discourse-cdn.com/v4/letter/v/dec6dc/32.png) [@Vision821](https://forums.yoyoexpert.com/u/Vision821)\
**Post date:** [November 9, 2025, 5:06am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/32 "2025-11-09T05:06:19Z")

</div>

That’s why I love flowable it’s softer and I can under-fill, too.

# Ghost binds are not in the spirit of Halloween

---

<div class="post-metadata">

**Author:** ![Kalic00](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kalic00](https://forums.yoyoexpert.com/u/Kalic00)\
**Post date:** [November 9, 2025, 1:25pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/33 "2025-11-09T13:25:53Z")

</div>

Hell of a necro😂 id hope after three years they’ve figured it out

---

<div class="post-metadata">

**Author:** ![NuroVolt7](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nurovolt7/32/671908_2.png) [@NuroVolt7](https://forums.yoyoexpert.com/u/NuroVolt7)\
**Post date:** [November 9, 2025, 6:59pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/34 "2025-11-09T18:59:57Z")

</div>

I like when necroes are for helpful reasons

---

<div class="post-metadata">

**Author:** ![CannibalCricket](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cannibalcricket/32/665098_2.png) [@CannibalCricket](https://forums.yoyoexpert.com/u/CannibalCricket)\
**Post date:** [November 9, 2025, 7:24pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/35 "2025-11-09T19:24:25Z")

</div>

About to give it a shot

 ![20251109_132315](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/5/2/4529d421f3782a12f74462eb7450c785daf0d131.jpeg)

---

<div class="post-metadata">

**Author:** ![CannibalCricket](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cannibalcricket/32/665098_2.png) [@CannibalCricket](https://forums.yoyoexpert.com/u/CannibalCricket)\
**Post date:** [November 9, 2025, 9:09pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/36 "2025-11-09T21:09:55Z")

</div>

So I think I did okay for a first try. Now just hurry up and cure already!

 ![20251109_150826](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/9/4/194ffe8d9642325913b985c975cd9ff102ea3c40.jpeg)

---

<div class="post-metadata">

**Author:** ![NuroVolt7](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nurovolt7/32/671908_2.png) [@NuroVolt7](https://forums.yoyoexpert.com/u/NuroVolt7)\
**Post date:** [November 9, 2025, 10:23pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/37 "2025-11-09T22:23:27Z")

</div>

What are the differences between Ultra Grey and Red Gasket Maker?

---

<div class="post-metadata">

**Author:** ![CannibalCricket](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/cannibalcricket/32/665098_2.png) [@CannibalCricket](https://forums.yoyoexpert.com/u/CannibalCricket)\
**Post date:** [November 9, 2025, 10:54pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/38 "2025-11-09T22:54:53Z")

</div>

From what I gathered from some dude on youtube grey is for heat and vibration applications where as red is even more heat resistance and some oil resistance. I guess grey is a step under red. Hoping it will be easier to remove later. Edit: grey high torque and red for high heat

---

<div class="post-metadata">

**Author:** ![Kalic00](https://avatars.discourse-cdn.com/v4/letter/k/f0a364/32.png) [@Kalic00](https://forums.yoyoexpert.com/u/Kalic00)\
**Post date:** [November 10, 2025, 3:36am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/39 "2025-11-10T03:36:33Z")

</div>

If memory recalls red is a bit more responsive than grey, and clear/flowable is more responsive than red.

---

<div class="post-metadata">

**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\
**Post date:** [November 13, 2025, 11:44pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962/40 "2025-11-13T23:44:24Z")

</div>

![1000004964](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/d/6/1d628ea1d6edba3876d62f4d1a9e1a2b4562a798.jpeg)

[Previous page](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962.md?page=1)

[Next page](https://forums.yoyoexpert.com/t/flowable-silicone-silliness/365962.md?page=3)
