# Flowable Silicone Problems

**URL:** https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407
**Category:** General Yo-Yo
**Created:** [January 17, 2010, 9:40pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407 "2010-01-17T21:40:05Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![speedmaker1101](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/speedmaker1101/32/95_2.png) [@speedmaker1101](https://forums.yoyoexpert.com/u/speedmaker1101)
#### Post date: [January 17, 2010, 9:40pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407/1 "2010-01-17T21:40:05Z")

</div>

Ok so i was flowable siliconing my new breed and i got a little bit of silicone got in the bearing seat, is it ruined? i think that i could get it out once it dries with a needle but im not sure.

---

<div class="post-metadata">

### Author: ![G51](https://avatars.discourse-cdn.com/v4/letter/g/ba8739/32.png) [@G51](https://forums.yoyoexpert.com/u/G51)
#### Post date: [January 17, 2010, 9:53pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407/2 "2010-01-17T21:53:31Z")

</div>

When it dries it will come right off with a needle.

---

<div class="post-metadata">

### Author: ![gluxon](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gluxon/32/392_2.png) [@gluxon](https://forums.yoyoexpert.com/u/gluxon)
#### Post date: [January 17, 2010, 11:45pm UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407/3 "2010-01-17T23:45:15Z")

</div>

Yep, you can just take it out with a needle 🙂

I was a bit afraid too on my first try 😃

---

<div class="post-metadata">

### Author: ![Yoda343](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoda343/32/55846_2.png) [@Yoda343](https://forums.yoyoexpert.com/u/Yoda343)
#### Post date: [February 28, 2010, 7:44am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407/4 "2010-02-28T07:44:26Z")

</div>

Use a toothpick. won’t damage your yoyo. and you can break it in half to cover more surface area, using the blunt end.

---

<div class="post-metadata">

### Author: ![RookieYo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/rookieyo/32/290_2.png) [@RookieYo](https://forums.yoyoexpert.com/u/RookieYo)
#### Post date: [February 28, 2010, 9:17am UTC](https://forums.yoyoexpert.com/t/flowable-silicone-problems/10407/5 "2010-02-28T09:17:44Z")

</div>

I believe that you can use anything when it dries…  
Just be careful…