# Fiesta Tres Help

**URL:** <https://forums.yoyoexpert.com/t/fiesta-tres-help/78851>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [January 14, 2016, 1:54am UTC](https://forums.yoyoexpert.com/t/fiesta-tres-help/78851 "2016-01-14T01:54:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SeaZebruhz](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@SeaZebruhz](https://forums.yoyoexpert.com/u/SeaZebruhz)\
**Post date:** [January 14, 2016, 1:54am UTC](https://forums.yoyoexpert.com/t/fiesta-tres-help/78851/1 "2016-01-14T01:54:04Z")

</div>

Ok, so I got my Fiesta Tres today. After a couple drops, the yoyo’s gap became offset resulting in some unpleasant vibe. With the YYJ Lock and Bolt system, is there anyway to fix/tune it?

---

<div class="post-metadata">

**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\
**Post date:** [January 14, 2016, 3:34am UTC](https://forums.yoyoexpert.com/t/fiesta-tres-help/78851/2 "2016-01-14T03:34:44Z")

</div>

Check to see if the axle is bent. Remove it and roll it on a flat surface. If it doesn’t roll smooth it’s bent and should be replaced. It’s a stock hardware item set screw. If you can’t get a set screw get a regular screw of the same thread size and cut the head off. File the cut end smooth.

---

<div class="post-metadata">

**Author:** ![SeaZebruhz](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@SeaZebruhz](https://forums.yoyoexpert.com/u/SeaZebruhz)\
**Post date:** [January 15, 2016, 12:24pm UTC](https://forums.yoyoexpert.com/t/fiesta-tres-help/78851/3 "2016-01-15T12:24:24Z")

</div>

I checked, the axle was fine. From closer inspection I can see that the metal spacer thing holding the bearing and response pads is popping out on an angle.