# Feeling bummed

**URL:** <https://forums.yoyoexpert.com/t/feeling-bummed/456008>\
**Category:** General Yo-Yo\
**Created:** [November 2, 2026, 4:38am UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008 "2026-11-02T04:38:17Z")\
**Posts on this page:** 14\
**Page:** 2

<div class="post-metadata">

**Author:** ![Tempura](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tempura/32/246135_2.png) [@Tempura](https://forums.yoyoexpert.com/u/Tempura)\
**Post date:** [November 2, 2026, 5:17pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/21 "2026-11-02T17:17:14Z")

</div>

Dead smooth and the bearing slips off like an OD thankfully. It’s an amazing player and I don’t intend to waste it.

---

<div class="post-metadata">

**Author:** ![yoyojoe](https://avatars.discourse-cdn.com/v4/letter/y/e99b99/32.png) [@yoyojoe](https://forums.yoyoexpert.com/u/yoyojoe)\
**Post date:** [November 2, 2026, 6:15pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/22 "2026-11-02T18:15:31Z")

</div>

Personally I would send it back and ask them to redo it. You could have them strip and possibly blast it before redoing it.

---

<div class="post-metadata">

**Author:** ![Upmanyu](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@Upmanyu](https://forums.yoyoexpert.com/u/Upmanyu)\
**Post date:** [November 2, 2026, 6:20pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/23 "2026-11-02T18:20:30Z")

</div>

I would suggest against this. I already posted about it above but if they are not super careful with the bearing seat, the repeated stripping and surface treatment can give quite a lot of vibe.

Custom ano is a gamble.

---

<div class="post-metadata">

**Author:** ![hsb](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hsb/32/193274_2.png) [@hsb](https://forums.yoyoexpert.com/u/hsb)\
**Post date:** [November 2, 2026, 6:47pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/24 "2026-11-02T18:47:26Z")

</div>

It looks like the pitting is beyond something that could be remedied at this point. Especially if it plays good, I’d just let it be.

---

<div class="post-metadata">

**Author:** ![pyrotechnic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pyrotechnic/32/689058_2.png) [@pyrotechnic](https://forums.yoyoexpert.com/u/pyrotechnic)\
**Post date:** [November 2, 2026, 6:58pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/25 "2026-11-02T18:58:52Z")

</div>

This is sad

---

<div class="post-metadata">

**Author:** ![SlowThrow](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/slowthrow/32/307451_2.png) [@SlowThrow](https://forums.yoyoexpert.com/u/SlowThrow)\
**Post date:** [November 2, 2026, 7:02pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/26 "2026-11-02T19:02:08Z")

</div>

I suppose it’s now players grade eh? I’d still rock it

---

<div class="post-metadata">

**Author:** ![Juiccetin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/juiccetin/32/671353_2.png) [@Juiccetin](https://forums.yoyoexpert.com/u/Juiccetin)\
**Post date:** [November 2, 2026, 7:02pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/27 "2026-11-02T19:02:19Z")

</div>

Re-doing/stripping it once will not meaningfully affect this unless done SUPER aggressively. Especially considering it was already raw and didn’t have to be stripped to begin with. I would absolutely send it back to get it redone, or at least send it to a different anodizer.

---

<div class="post-metadata">

**Author:** ![arcturus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/arcturus/32/692026_2.png) [@arcturus](https://forums.yoyoexpert.com/u/arcturus)\
**Post date:** [November 2, 2026, 7:20pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/28 "2026-11-02T19:20:31Z")

</div>

Thanks for sharing your experience. Even though it’s tough, I think it’s valuable for the community to be aware of when others have had bad experiences so they can do due diligence.

On that note, as someone who may want to get a custom ano in the future… I’m kind of curious why there aren’t many reviews of anodizers on this forum. Some people on the forum also offer this service, and I think it’d be good to know what people’s experiences were (both positive and negative). Are these just often hidden in trader feedback? How would one find out about who does custom anos and what their reputation is?

---

<div class="post-metadata">

**Author:** ![yoyodoc](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyodoc/32/48820_2.png) [@yoyodoc](https://forums.yoyoexpert.com/u/yoyodoc)\
**Post date:** [November 2, 2026, 8:01pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/29 "2026-11-02T20:01:56Z")

</div>

Astute observation on your part. Thanks for mentioning that and understanding that that was most likely the root cause of the problem. It’s primarily the zinc and the copper in the 7075 that don’t react well to the anodizing process. At the point of any electrical/chemical bath, the 7075 alloys react as contaminants and try to remove themselves from the pool party.

I am personally not big on AI at the moment. My iPhone 18 keeps popping up little windows asking me to shift over to the various AI options. I keep closing windows and or saying no or whatever because I personally don’t feel the need to use a super brain to think. But that being said, to save you guys a long story, I decided to go into a search engine and find out more concise explanation to what I would give you guys. That way you could get straight to the facts and learn something without falling asleep with me trying to explain it.

When I hit enter, the results that I got were better than I expected. I actually smiled and said, wow, this oughta work. If somebody doesn’t understand this, then they’re either not paying attention or they just refuse to learn anything. So I copied and I will be pasting right below my little explanation, and it is very clear that 7075 does not like being anodized and will result in pits or other types of surface irregularities, blah, blah, blah

…. So here’s what I got when I hit enter\>

**7075** is more likely to pit

or suffer from localized corrosion and surface defects during and after anodizing than **6061**. [[1](https://machcncmaster.com/6061-vs-7075-aluminum-which-alloy-is-best-machmaster-manufacturing/), [2](https://www.makerstage.com/resources/aluminum-6061-vs-7075), [3](https://www.eng-tips.com/threads/6061-alum-or-7075-alum.136775/)]

**Why 7075 Pits More Easily**

- **High Zinc and Copper Content:** 7075 contains substantial amounts of zinc (approx. 5.1–6.1%) and copper (approx. 1.2–2.0%), along with magnesium. These secondary alloying elements do not anodize at the same rate as pure aluminum. [[1](https://machcncmaster.com/6061-vs-7075-aluminum-which-alloy-is-best-machmaster-manufacturing/)]
- **Intermetallic Particles:** The presence of heavy intermetallic precipitates creates micro-galvanic cells in the bath or leads to uneven oxide growth. This can result in localized etching, pitting, or a blotchy/dingy appearance (often a yellowish, brownish, or greenish-olive tint). [[1](https://www.3qmachining.com/aluminum-6061-vs-7075-the-materials-difference-explained/), [2](https://www.makerstage.com/resources/aluminum-6061-vs-7075)]
- **Lower General Corrosion Resistance:** 7075 has a naturally lower general corrosion resistance (rated “C” compared to **6061** ’s “B” in standard alloy rankings), making it more vulnerable to attack by aggressive anodizing or chemical prep solutions. [[1](https://machcncmaster.com/6061-vs-7075-aluminum-which-alloy-is-best-machmaster-manufacturing/)]
- **Stress Corrosion Risk:** 7075 is also significantly more prone to stress corrosion cracking (SCC) if residual stresses are present prior to or during processing. [[1](https://www.reddit.com/r/MechanicalEngineering/comments/1ruybrg/7075t6_vs_6061_aluminum_when_is_the_extra_cost/), [2](https://www.eng-tips.com/threads/6061-alum-or-7075-alum.136775/)]

**Why 6061 Behaves Better**

- **Magnesium and Silicon Composition:**  **6061** relies primarily on lower levels of magnesium (0.8–1.2%) and silicon (0.4–0.8%). [[1](https://machcncmaster.com/6061-vs-7075-aluminum-which-alloy-is-best-machmaster-manufacturing/)]
- **Uniform Anodize Layer:** Because the alloying elements are much more harmonious with the electrochemical oxidation process, **6061** takes both Type II (standard) and Type III (hardcoat) anodizing cleanly, resulting in a smooth, even, and predictable finish…

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/a/2/da204f40414a0b4a207d0b1f8181130ff80d5faf.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/8/e/98e9996971bfd30fcf88186e6aba2ddc0ff28d9f.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/8/e/98e9996971bfd30fcf88186e6aba2ddc0ff28d9f.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/8/e/98e9996971bfd30fcf88186e6aba2ddc0ff28d9f.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/a/2/da204f40414a0b4a207d0b1f8181130ff80d5faf.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/8/e/98e9996971bfd30fcf88186e6aba2ddc0ff28d9f.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/d/a/2/da204f40414a0b4a207d0b1f8181130ff80d5faf.png)

![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/9/8/e/98e9996971bfd30fcf88186e6aba2ddc0ff28d9f.png)

---

<div class="post-metadata">

**Author:** ![yoyojoe](https://avatars.discourse-cdn.com/v4/letter/y/e99b99/32.png) [@yoyojoe](https://forums.yoyoexpert.com/u/yoyojoe)\
**Post date:** [November 2, 2026, 8:04pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/30 "2026-11-02T20:04:09Z")

</div>

Custom anodizing is difficult to do for single throws. Gruntbull took about six months to complete my order. Each anodizing job cost over $100, the bearing seat was masked off, leaving the original color exposed, and there were anodizing defects in the final result.

---

<div class="post-metadata">

**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\
**Post date:** [November 2, 2026, 9:19pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/31 "2026-11-02T21:19:14Z")

</div>

> [@yoyojoe](#):
>
> Custom anodizing is difficult to do for single throws

why would a single unit be more difficult than a whole batch?

---

<div class="post-metadata">

**Author:** ![Jobis2020](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jobis2020/32/597392_2.png) [@Jobis2020](https://forums.yoyoexpert.com/u/Jobis2020)\
**Post date:** [November 2, 2026, 9:31pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/32 "2026-11-02T21:31:23Z")

</div>

I’m sorry this happened. I’ve never seen this before. I’ve personally done numerous work with BT and it’s always turned out great. I would have a close friend strip and tumble every yoyo before I sent it to BT. They were all 6061 so I’m not sure if that was a factor.

But one thing I always keep in mind is that if I am sending a yoyo to get re-annod after stripping it, I consider the fact that the yoyo may not perform as well as it did before. It’s hard to expect perfection with these types of things.

Anyways here’s the last thing I got done by him, an Advanced Scout (this was the first time he ever did this color way and it turned out amazing):

 ![4177](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/1/3/413ba49a59cd258404c8bed99eef9bef454e5c40.jpeg)

---

<div class="post-metadata">

**Author:** ![Tempura](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tempura/32/246135_2.png) [@Tempura](https://forums.yoyoexpert.com/u/Tempura)\
**Post date:** [November 2, 2026, 9:36pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/33 "2026-11-02T21:36:47Z")

</div>

That’s what hurts, so many examples of how sick his work is and then just my luck…

---

<div class="post-metadata">

**Author:** ![zxin](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/zxin/32/649326_2.png) [@zxin](https://forums.yoyoexpert.com/u/zxin)\
**Post date:** [November 2, 2026, 9:37pm UTC](https://forums.yoyoexpert.com/t/feeling-bummed/456008/34 "2026-11-02T21:37:15Z")

</div>

> [@Splizacular](#):
>
> why would a single unit be more difficult than a whole batch?

It would be as difficult as a whole batch, most likely; so the cost is proportionally much higher.

[Previous page](https://forums.yoyoexpert.com/t/feeling-bummed/456008.md?page=1)
