# DV 888 bering **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [April 7, 2010, 9:31pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113 "2010-04-07T21:31:55Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![neil.parsa](https://avatars.discourse-cdn.com/v4/letter/n/9fc29f/32.png) [@neil.parsa](https://forums.yoyoexpert.com/u/neil.parsa)\ **Post date:** [April 7, 2010, 9:31pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/1 "2010-04-07T21:31:55Z")
So I started messing with my DV888 again andit was resporsive so i put a bit more thin lube than nessisary and now i can basicly pull the string of the bering. What happened to it!? ??? ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [April 7, 2010, 10:36pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/2 "2010-04-07T22:36:15Z")
You lubed the bearing which increases the response of it. Break it in or clean it and it will be unresponsive again. ---
**Author:** ![neil.parsa](https://avatars.discourse-cdn.com/v4/letter/n/9fc29f/32.png) [@neil.parsa](https://forums.yoyoexpert.com/u/neil.parsa)\ **Post date:** [April 7, 2010, 11:44pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/3 "2010-04-07T23:44:16Z")
no its already inresponsive but the bering is to free its hard to explain i put thin lube in ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [April 8, 2010, 12:02am UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/4 "2010-04-08T00:02:55Z")
I don’t understand what you are saying and thus also have no idea what the problem is. Would you care to explain the issue you are having in better detail? ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [April 8, 2010, 2:45am UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/5 "2010-04-08T02:45:35Z")
What you just explained is rectified by what Mrcnja just explained. Unless you are thinking of the wrong word and confused us all. ---
**Author:** ![neil.parsa](https://avatars.discourse-cdn.com/v4/letter/n/9fc29f/32.png) [@neil.parsa](https://forums.yoyoexpert.com/u/neil.parsa)\ **Post date:** [April 8, 2010, 7:16pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/6 "2010-04-08T19:16:34Z")
ok well my dv 888 bering is spinning very freely and i think it is my o rings now because i just lost them i i was playing without it ---
**Author:** ![Yummy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yummy/32/14065_2.png) [@Yummy](https://forums.yoyoexpert.com/u/Yummy)\ **Post date:** [April 8, 2010, 8:22pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/7 "2010-04-08T20:22:13Z")
So you have no response in the yo-yo at the moment and it doesn’t bind correctly not to mention that you can just pull the string out of the yo-yo even after winding it up by hand. Is all of that correct? If so then you need to put the pads back into the yo-yo. If you have lost them you will need to replace them before you can play with your yo-yo. You can either [order new k-pads for your Dv888](http://shop.yoyoexpert.com/product/64/YYF-Response) or buy silicone at an autoparts store. If you go the silicone route, you have the options of flowable or gasket maker. ---
**Author:** ![neil.parsa](https://avatars.discourse-cdn.com/v4/letter/n/9fc29f/32.png) [@neil.parsa](https://forums.yoyoexpert.com/u/neil.parsa)\ **Post date:** [April 8, 2010, 10:02pm UTC](https://forums.yoyoexpert.com/t/dv-888-bering/13113/8 "2010-04-08T22:02:03Z")
k thanks and can you by silli from like a home depot or lowes type store