# duncan butterfly mods

**URL:** <https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [November 4, 2011, 11:21pm UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317 "2011-11-04T23:21:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gaara4sand](https://avatars.discourse-cdn.com/v4/letter/g/b487fb/32.png) [@gaara4sand](https://forums.yoyoexpert.com/u/gaara4sand)\
**Post date:** [November 4, 2011, 11:21pm UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317/1 "2011-11-04T23:21:54Z")

</div>

i have 2 duncan butterfly yoyo halves with no axle, what should i do with it?

---

<div class="post-metadata">

**Author:** ![yoyoedumaster](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoedumaster/32/983_2.png) [@yoyoedumaster](https://forums.yoyoexpert.com/u/yoyoedumaster)\
**Post date:** [November 4, 2011, 11:35pm UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317/2 "2011-11-04T23:35:04Z")

</div>

Well now its open you probably wll need a axle. Then u can probably put a bearing or someting in it. If u do some work u can make it take apart.

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [November 5, 2011, 5:23pm UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317/3 "2011-11-05T17:23:15Z")

</div>

Buy a One.

---

<div class="post-metadata">

**Author:** ![PlasticWhip](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/plasticwhip/32/896_2.png) [@PlasticWhip](https://forums.yoyoexpert.com/u/PlasticWhip)\
**Post date:** [November 5, 2011, 11:48pm UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317/4 "2011-11-05T23:48:36Z")

</div>

> [@Studio42](#):
>
> Buy a One.

Well that’s not exactly a mod, now is it?

Best thing to do is get a lathe, some press fit things, crucial spacers, and a c sized bearing.

Price should come out around \>$400

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [November 6, 2011, 12:32am UTC](https://forums.yoyoexpert.com/t/duncan-butterfly-mods/31317/5 "2011-11-06T00:32:25Z")

</div>

> [@PlasticWhip](#):
>
> > [@Studio42](#):
> >
> > Buy a One.
> 
> Well that’s not exactly a mod, now is it?
> 
> Best thing to do is get a lathe, some press fit things, crucial spacers, and a c sized bearing.
> 
> Price should come out around \>$400

No, my idea wasn’t a mod. It was just a lot more cost effective.