# dm side need help **URL:** \ **Category:** General Yo-Yo\ **Created:** [September 8, 2009, 2:30pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370 "2009-09-08T14:30:08Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![gnomie](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gnomie/32/253_2.png) [@gnomie](https://forums.yoyoexpert.com/u/gnomie)\ **Post date:** [September 8, 2009, 2:30pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/1 "2009-09-08T14:30:08Z")
i finaly got my dm!!! ;D so i took the sides out and i Accidentally put it in backwards and now its stuck.any one know what i can do? ??? ---
**Author:** ![Xdohl](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xdohl/32/12_2.png) [@Xdohl](https://forums.yoyoexpert.com/u/Xdohl)\ **Post date:** [September 8, 2009, 2:33pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/2 "2009-09-08T14:33:52Z")
You mean the caps? If so, use a suction cup to get them out. If you can’t do that, use a small knife, but be very careful, because knives are sharp. I don’t see why you want to take them out so badly. ---
**Author:** ![gnomie](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gnomie/32/253_2.png) [@gnomie](https://forums.yoyoexpert.com/u/gnomie)\ **Post date:** [September 8, 2009, 2:37pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/3 "2009-09-08T14:37:19Z")
thanks ;D ill try the knife the suction cup wouldent work ---
**Author:** ![JM1](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jm1/32/135_2.png) [@JM1](https://forums.yoyoexpert.com/u/JM1)\ **Post date:** [September 8, 2009, 2:57pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/4 "2009-09-08T14:57:51Z")
> [@gnomie](#): > > thanks ;D ill try the knife the suction cup wouldent work If you use a knife, you’re going to poke a hole in the cap… make sure you want that/ ---
**Author:** ![Apetrunk](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/apetrunk/32/148_2.png) [@Apetrunk](https://forums.yoyoexpert.com/u/Apetrunk)\ **Post date:** [September 8, 2009, 6:01pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/5 "2009-09-08T18:01:12Z")
If you can’t get it out with the suction cup, trying putting a bit of water on the cap and then use the suction cup. This will help make a tighter seal on it. It also helps to have the cup similar in size to the cap. Just make sure not to get any water around the bearing. ---
**Author:** ![Gafunka](https://avatars.discourse-cdn.com/v4/letter/g/858c86/32.png) [@Gafunka](https://forums.yoyoexpert.com/u/Gafunka)\ **Post date:** [September 8, 2009, 6:11pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/6 "2009-09-08T18:11:41Z")
Before trying a knife or poking a hole in your cap, try duct tape. I just went through this myself. It didn’t work the first time but I finally got it out with a bit of tape. It wasn’t easy but better I thought than putting a hole in my cap. But if you can get a suction cup, go that route. ---
**Author:** ![yoyolvr](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyolvr/32/229_2.png) [@yoyolvr](https://forums.yoyoexpert.com/u/yoyolvr)\ **Post date:** [September 8, 2009, 7:03pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/7 "2009-09-08T19:03:39Z")
a knife is too risky, try a suction cup and use needle nose pliers to pull it away. it adds more force to those hard to get off caps ---
**Author:** ![gnomie](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gnomie/32/253_2.png) [@gnomie](https://forums.yoyoexpert.com/u/gnomie)\ **Post date:** [September 9, 2009, 11:44pm UTC](https://forums.yoyoexpert.com/t/dm-side-need-help/6370/8 "2009-09-09T23:44:49Z")
I got it with the suction cup with water and used pliers for a better grip or my dad did actually.