# Determining Gap Width

**URL:** <https://forums.yoyoexpert.com/t/determining-gap-width/319091>\
**Category:** General Yo-Yo\
**Created:** [April 28, 2020, 8:11pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091 "2020-04-28T20:11:20Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)\
**Post date:** [April 28, 2020, 8:11pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/1 "2020-04-28T20:11:20Z")

</div>

Gap width to me isn’t intuitive,

e.g. all c bearings have the same width (are the same size) therefore all c bearing yoyo’s have the same minimum gap or gap width,

I know this is ignorant. What is gap width actually a measure of? With all the shapes yoyo’s come in now days, I think the term would be confusing.

---

<div class="post-metadata">

**Author:** ![zslane](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/zslane/32/19816_2.png) [@zslane](https://forums.yoyoexpert.com/u/zslane)\
**Post date:** [April 28, 2020, 8:28pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/2 "2020-04-28T20:28:02Z")

</div>

Gap width is essentially the distance between the response pads. This varies from yoyo to yoyo, even though bearings are the same width (within certain tolerances), because the depth of the bearing seat can vary, depending on the design and the desired gap width.

---

<div class="post-metadata">

**Author:** ![hobbygod](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hobbygod/32/120997_2.png) [@hobbygod](https://forums.yoyoexpert.com/u/hobbygod)\
**Post date:** [April 28, 2020, 8:28pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/3 "2020-04-28T20:28:07Z")

</div>

Somebody could probably explain it to me, but the general idea is if the bearing seat is deeper in the yoyo the smaller the gap width.

---

<div class="post-metadata">

**Author:** ![Roy\_Dodge](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/roy_dodge/32/99408_2.png) [@Roy\_Dodge](https://forums.yoyoexpert.com/u/Roy_Dodge)\
**Post date:** [April 28, 2020, 8:28pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/4 "2020-04-28T20:28:55Z")

</div>

Pretty sure that’s exactly it.

---

<div class="post-metadata">

**Author:** ![FiveIronBrian](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fiveironbrian/32/451_2.png) [@FiveIronBrian](https://forums.yoyoexpert.com/u/FiveIronBrian)\
**Post date:** [April 28, 2020, 8:30pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/5 "2020-04-28T20:30:30Z")

</div>

Great question. I would think the answer is the distance between the yo-yo halves at the outer rim of the response recess. Seems like the most consistent metric.

Of course what really counts is the distance between response pads, but I wouldn’t expect it to be a terribly accurate measurement because of the response squishy-ness and unknown tolerance of pad thickness.

I’m curious what YYE does.

---

<div class="post-metadata">

**Author:** ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)\
**Post date:** [April 29, 2020, 1:42am UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/6 "2020-04-29T01:42:26Z")

</div>

Ah, wouldn’t of thought of that. It still makes me wonder that yoyo(s) with wider gaps are often purported as being better. but the actual distance between the pads must be slight. Right?

---

<div class="post-metadata">

**Author:** ![fatguysnacks247](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fatguysnacks247/32/81478_2.png) [@fatguysnacks247](https://forums.yoyoexpert.com/u/fatguysnacks247)\
**Post date:** [April 29, 2020, 4:19pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/7 "2020-04-29T16:19:28Z")

</div>

so, let’s show an extreme example that’s been a topic of discussion recently - the dv888. the dv888 comes set up stock with it’s own pads, responsive with a half-spec c-bearing. despite the depth to the response recess, the pads extend well beyond that… causing this yoyo to snap like an alligator. putting the full spec c-bearing in may widen the gap in the response recess, however the pads will still impact that overall distance. i did not have a micrometer handy, so i didn’t measure the differences, compared to specified

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/e/e/7ee33b2d4202fe5132615d200628addb2d6afe5c.jpeg) ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/1/6/e/16e3b7bc16b304cdf164dbcffb4f3df05de240b2.jpeg)

now, with silicone, if properly poured and when cured, should form a meniscus to the interior of the recess wall - which i tried to show here. preferences may vary, but that’s the overall gist. this is an mfd sea monkey

 ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/a/0/f/a0f19f2c5e4e0f7de648e13505b634688ad1b410.jpeg) ![image](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/f/c/4/fc424c4820dd75fb8f53b087f3fac0b626cf7078.jpeg)

---

<div class="post-metadata">

**Author:** ![codinghorror](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/codinghorror/32/8052_2.png) [@codinghorror](https://forums.yoyoexpert.com/u/codinghorror)\
**Post date:** [April 29, 2020, 5:07pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/8 "2020-04-29T17:07:07Z")

</div>

> [@fatguysnacks247](#):
>
> the dv888

🤮

---

<div class="post-metadata">

**Author:** ![fatguysnacks247](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fatguysnacks247/32/81478_2.png) [@fatguysnacks247](https://forums.yoyoexpert.com/u/fatguysnacks247)\
**Post date:** [April 29, 2020, 5:09pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/9 "2020-04-29T17:09:06Z")

</div>

do you have dv888 alerts on your phone @codinghorror?

---

<div class="post-metadata">

**Author:** ![codinghorror](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/codinghorror/32/8052_2.png) [@codinghorror](https://forums.yoyoexpert.com/u/codinghorror)\
**Post date:** [April 29, 2020, 5:25pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/10 "2020-04-29T17:25:15Z")

</div>

No but this is a good one. The sticking-out pads are so weird on this yo-yo.

---

<div class="post-metadata">

**Author:** ![Throwto100](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/throwto100/32/87184_2.png) [@Throwto100](https://forums.yoyoexpert.com/u/Throwto100)\
**Post date:** [April 29, 2020, 5:34pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/11 "2020-04-29T17:34:12Z")

</div>

For a size C bearing, I believe the maximum gap width is somewhere around 5 mm. The Yoyofactory Nightmare is a recent example of this. No minimum really exists, but if the gap width on a yoyo is smaller then a half SPEC bearing, the company might put that in instead. Smaller gaps mean that the response pads are closer together, which usually makes for tighter binds, but also less room for string wraps. I have kitty fat and kitty XL, and the XL usually goes on yoyos that have 4.60mm gap widths or more, the fat goes on smaller gap yoyos. Gap width is much more of a preference then a performance measure, string and pad choice can usually fix any issues you might have with snags or slipped binds.

---

<div class="post-metadata">

**Author:** ![zslane](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/zslane/32/19816_2.png) [@zslane](https://forums.yoyoexpert.com/u/zslane)\
**Post date:** [April 29, 2020, 6:01pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/12 "2020-04-29T18:01:50Z")

</div>

> [@codinghorror](#):
>
> The sticking-out pads are so weird on this yo-yo.

They do the same thing to the Replay. 🤷‍♂️

---

<div class="post-metadata">

**Author:** ![codinghorror](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/codinghorror/32/8052_2.png) [@codinghorror](https://forums.yoyoexpert.com/u/codinghorror)\
**Post date:** [April 29, 2020, 10:13pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/13 "2020-04-29T22:13:21Z")

</div>

And the moonshine 2.0 has two different pad thicknesses, but it’s intentional, and it plays _grrrreat_.

---

<div class="post-metadata">

**Author:** ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)\
**Post date:** [April 30, 2020, 1:08am UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/14 "2020-04-30T01:08:38Z")

</div>

had to trade stock edgless pads for some red yyf, are they even supposed to take yyf pads? Idk it even effects vibe. Feeling like a major newb now.

---

<div class="post-metadata">

**Author:** ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)\
**Post date:** [May 27, 2020, 4:17pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/15 "2020-05-27T16:17:54Z")

</div>

Does anyone know what thickness the different yo yo factory pads add? (preferably mm)

---

<div class="post-metadata">

**Author:** ![Kyle](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kyle/32/85091_2.png) [@Kyle](https://forums.yoyoexpert.com/u/Kyle)\
**Post date:** [May 27, 2020, 4:26pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/16 "2020-05-27T16:26:45Z")

</div>

most are 19mm which is normally how deep the yoyo response pads seats are so none. although they sell green response pads which are a quite a bit thicker for snappier responsive play

---

<div class="post-metadata">

**Author:** ![Roy\_Dodge](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/roy_dodge/32/99408_2.png) [@Roy\_Dodge](https://forums.yoyoexpert.com/u/Roy_Dodge)\
**Post date:** [May 27, 2020, 4:30pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/17 "2020-05-27T16:30:18Z")

</div>

Doesn’t 19mm refer to the diameter of the pads, not the thickness?

---

<div class="post-metadata">

**Author:** ![Kyle](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/kyle/32/85091_2.png) [@Kyle](https://forums.yoyoexpert.com/u/Kyle)\
**Post date:** [May 27, 2020, 4:30pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/18 "2020-05-27T16:30:38Z")

</div>

ye oop my bad

---

<div class="post-metadata">

**Author:** ![Apple](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@Apple](https://forums.yoyoexpert.com/u/Apple)\
**Post date:** [May 27, 2020, 4:54pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/19 "2020-05-27T16:54:10Z")

</div>

so that’s sort of my question. the response pad thickness, which yyf color coordinates, should in theory, by the information in the rest of this topic, determine the gap with, with the thicker pads decreasing the gap width. I was just wondering by how much these pads change the gap width (the width between response pads)

---

<div class="post-metadata">

**Author:** ![fatguysnacks247](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fatguysnacks247/32/81478_2.png) [@fatguysnacks247](https://forums.yoyoexpert.com/u/fatguysnacks247)\
**Post date:** [May 27, 2020, 5:12pm UTC](https://forums.yoyoexpert.com/t/determining-gap-width/319091/20 "2020-05-27T17:12:19Z")

</div>

you can pick up a digital micrometer cheap, as well as a calculator, and just calc it out… $14 you’d be set for life on every yoyo you’d ever own… and there are sooooooo many more uses for the boxes they come in.

[Next page](https://forums.yoyoexpert.com/t/determining-gap-width/319091.md?page=2)
