# Derlin sever troubles **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [April 7, 2013, 7:58pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945 "2013-04-07T19:58:17Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![HaOn1313](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HaOn1313](https://forums.yoyoexpert.com/u/HaOn1313)\ **Post date:** [April 7, 2013, 7:58pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/1 "2013-04-07T19:58:17Z")
Ok so I have had my sever for a little while now than a vibe came out of nowhere. So I replaced the bering and took off the caps and it’s still vibey. Anything else I can do to save it? ---
**Author:** ![augmentedloyalty](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/augmentedloyalty/32/1218_2.png) [@augmentedloyalty](https://forums.yoyoexpert.com/u/augmentedloyalty)\ **Post date:** [April 7, 2013, 8:25pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/2 "2013-04-07T20:25:24Z")
Use this guide to help [http://yoyoexpert.com/forums/index.php?PHPSESSID=f89455a53e67a7655addbcdde53b7cf0&/topic,9488.0.html](http://yoyoexpert.com/forums/index.php?PHPSESSID=f89455a53e67a7655addbcdde53b7cf0&/topic,9488.0.html) ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [April 7, 2013, 9:32pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/3 "2013-04-07T21:32:08Z")
No need to replace a bearing to fix vibe. Your axle is probably bent, take it out and roll it on flat surface. If it wobbles its bent if not its fine :). ---
**Author:** ![England1414](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@England1414](https://forums.yoyoexpert.com/u/England1414)\ **Post date:** [April 7, 2013, 10:50pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/4 "2013-04-07T22:50:13Z")
DEL-RIN\* ---
**Author:** ![HaOn1313](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HaOn1313](https://forums.yoyoexpert.com/u/HaOn1313)\ **Post date:** [April 7, 2013, 11:06pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/5 "2013-04-07T23:06:28Z")
> [@Bcmaddog](#): > > No need to replace a bearing to fix vibe. > > Your axle is probably bent, take it out and roll it on flat surface. If it wobbles its bent if not its fine :). How do I take the axle out of the delrin sever? ---
**Author:** ![augmentedloyalty](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/augmentedloyalty/32/1218_2.png) [@augmentedloyalty](https://forums.yoyoexpert.com/u/augmentedloyalty)\ **Post date:** [April 7, 2013, 11:45pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/6 "2013-04-07T23:45:28Z")
> [@HaOn1313](#): > > > [@Bcmaddog](#): > > > > No need to replace a bearing to fix vibe. > > > > Your axle is probably bent, take it out and roll it on flat surface. If it wobbles its bent if not its fine :). > > How do I take the axle out of the delrin sever? get a hex key and put the hex key then turn it, ---
**Author:** ![HaOn1313](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HaOn1313](https://forums.yoyoexpert.com/u/HaOn1313)\ **Post date:** [April 8, 2013, 12:07am UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/7 "2013-04-08T00:07:47Z")
Ok so the axle is fine. Is it possible that somehow the seat got screwed up? ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [April 8, 2013, 12:47am UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/8 "2013-04-08T00:47:51Z")
That’s a possibility. Did you drop it recently? One way to maybe tell is to lay the yoyo on a table and carefully measure 4-5 places around the edge. If they’re all the same, nothing is bent. If one side is noticeably different then something is wrong. If you have a calipers it would be easier. ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [April 8, 2013, 1:54pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/9 "2013-04-08T13:54:29Z")
You could also roll the yoyo on a flat surface like the axle, and measure of course like jhb said ;). ---
**Author:** ![HaOn1313](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HaOn1313](https://forums.yoyoexpert.com/u/HaOn1313)\ **Post date:** [April 13, 2013, 8:07pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/10 "2013-04-13T20:07:38Z")
> [@jhb8426](#): > > That’s a possibility. Did you drop it recently? One way to maybe tell is to lay the yoyo on a table and carefully measure 4-5 places around the edge. If they’re all the same, nothing is bent. If one side is noticeably different then something is wrong. If you have a calipers it would be easier. Ok so that is the problem. How do I fix it? ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [April 14, 2013, 1:19am UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/11 "2013-04-14T01:19:02Z")
> [@HaOn1313](#): > > > [@jhb8426](#): > > > > That’s a possibility. Did you drop it recently? One way to maybe tell is to lay the yoyo on a table and carefully measure 4-5 places around the edge. If they’re all the same, nothing is bent. If one side is noticeably different then something is wrong. If you have a calipers it would be easier. > > Ok so that is the problem. How do I fix it? Its uneven when you will it on the table? You might have got a bad one, got emal [Contact@yoyoexpert.com](mailto:Contact@yoyoexpert.com) Andre will help you. ---
**Author:** ![England1414](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@England1414](https://forums.yoyoexpert.com/u/England1414)\ **Post date:** [May 1, 2013, 7:44pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/12 "2013-05-01T19:44:34Z")
DELRIN\* ---
**Author:** ![Nemyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nemyo/32/14407_2.png) [@Nemyo](https://forums.yoyoexpert.com/u/Nemyo)\ **Post date:** [May 1, 2013, 7:57pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/13 "2013-05-01T19:57:50Z")
> [@England1414](#): > > DELRIN\* THANK YOU FOR YOUR SERVICE TO HUMANITY! ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 1, 2013, 9:01pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/14 "2013-05-01T21:01:56Z")
> [@England1414](#): > > DELRIN\* THANK YOU SIR! PLEASE REFER TO THE THREAD I MADE… NO ONE SEEMS TO CARE :🙂 ---
**Author:** ![sparhawk](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@sparhawk](https://forums.yoyoexpert.com/u/sparhawk)\ **Post date:** [May 2, 2013, 4:09am UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/15 "2013-05-02T04:09:14Z")
> [@Bcmaddog](#): > > > [@HaOn1313](#): > > > > > [@jhb8426](#): > > > > > > That’s a possibility. Did you drop it recently? One way to maybe tell is to lay the yoyo on a table and carefully measure 4-5 places around the edge. If they’re all the same, nothing is bent. If one side is noticeably different then something is wrong. If you have a calipers it would be easier. > > > > Ok so that is the problem. How do I fix it? > > Its uneven when you will it on the table? You might have got a bad one, got emal [Contact@yoyoexpert.com](mailto:Contact@yoyoexpert.com) > > Andre will help you. if it went from smooth to having vibe it was most likely user error ---
**Author:** ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)\ **Post date:** [May 2, 2013, 7:15am UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/16 "2013-05-02T07:15:06Z")
> [@England1414](#): > > DEL-RIN\* > [@England1414](#): > > DELRIN\* Was it really necessary to post that twice? If you understood exactly what he was referring to, I don’t see the issue. ---
**Author:** ![Bcmaddog](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/bcmaddog/32/1170_2.png) [@Bcmaddog](https://forums.yoyoexpert.com/u/Bcmaddog)\ **Post date:** [May 2, 2013, 7:58pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/17 "2013-05-02T19:58:01Z")
> [@dynikus](#): > > > [@England1414](#): > > > > DEL-RIN\* > > > [@England1414](#): > > > > DELRIN\* > > Was it really necessary to post that twice? If you understood exactly what he was referring to, I don’t see the issue. ---
**Author:** ![GregP](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gregp/32/1192_2.png) [@GregP](https://forums.yoyoexpert.com/u/GregP)\ **Post date:** [May 2, 2013, 8:16pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/18 "2013-05-02T20:16:07Z")
Yeah, come on guys. Why over-emphasize “DELRIN” when he also spelled “Severe” incorrectly? ---
**Author:** ![HaOn1313](https://avatars.discourse-cdn.com/v4/letter/h/977dab/32.png) [@HaOn1313](https://forums.yoyoexpert.com/u/HaOn1313)\ **Post date:** [May 3, 2013, 2:29pm UTC](https://forums.yoyoexpert.com/t/derlin-sever-troubles/51945/19 "2013-05-03T14:29:30Z")
Oops my bad. Probably should have checked my spelling. Sorry 😛