# custom yoyo **URL:** \ **Category:** General Yo-Yo\ **Created:** [November 29, 2008, 11:30pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149 "2008-11-29T23:30:06Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![saxon\_zoolakis](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@saxon\_zoolakis](https://forums.yoyoexpert.com/u/saxon_zoolakis)\ **Post date:** [November 29, 2008, 11:30pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/1 "2008-11-29T23:30:06Z")
i am designing and machining a one of a kind aluminum yoyo. is anyone interested in buying. i will pics as soon as the project is finished. there will probably only going to be 2 or 3 made. it will be going for about $80-$100 depending on the like of it. specs: width- 1.60in diameter-1.98in konkave bearing based off the Catch 22 ---
**Author:** ![saxon\_zoolakis](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@saxon\_zoolakis](https://forums.yoyoexpert.com/u/saxon_zoolakis)\ **Post date:** [November 29, 2008, 11:59pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/2 "2008-11-29T23:59:41Z")
reply if you want to know more or if you have a comment ---
**Author:** ![Wilba](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/wilba/32/17_2.png) [@Wilba](https://forums.yoyoexpert.com/u/Wilba)\ **Post date:** [November 30, 2008, 2:57pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/3 "2008-11-30T14:57:07Z")
do you have any pictures? ---
**Author:** ![saxon\_zoolakis](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@saxon\_zoolakis](https://forums.yoyoexpert.com/u/saxon_zoolakis)\ **Post date:** [November 30, 2008, 9:41pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/4 "2008-11-30T21:41:44Z")
there is a rendering i did ---
**Author:** ![saxon\_zoolakis](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@saxon\_zoolakis](https://forums.yoyoexpert.com/u/saxon_zoolakis)\ **Post date:** [November 30, 2008, 9:42pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/5 "2008-11-30T21:42:18Z")
check the attachment ---
**Author:** ![Wilba](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/wilba/32/17_2.png) [@Wilba](https://forums.yoyoexpert.com/u/Wilba)\ **Post date:** [December 1, 2008, 7:50pm UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/6 "2008-12-01T19:50:43Z")
looking good, I’m loving the gap, its just right :wink: ---
**Author:** ![YoYoGuy66](https://avatars.discourse-cdn.com/v4/letter/y/258eb7/32.png) [@YoYoGuy66](https://forums.yoyoexpert.com/u/YoYoGuy66)\ **Post date:** [December 2, 2008, 12:03am UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/7 "2008-12-02T00:03:11Z")
Cool, I might get one. How do you go about making your own yoyos??? ---
**Author:** ![Michael17x](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/michael17x/32/13_2.png) [@Michael17x](https://forums.yoyoexpert.com/u/Michael17x)\ **Post date:** [December 2, 2008, 1:26am UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/8 "2008-12-02T01:26:27Z")
It looks kind of generic but good nonetheless. Kind of a mix between a project and G5. That combination should be an awesome one. Most yo-yos (I believe, correct me if I’m wrong) are made with CNC lathes because doing it by hand would be very hard and in-accurate. It could be done, i think, with a CNC machine. I’m not 100% sure so don’t quote me on this. ---
**Author:** ![saxon\_zoolakis](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@saxon\_zoolakis](https://forums.yoyoexpert.com/u/saxon_zoolakis)\ **Post date:** [December 2, 2008, 2:05am UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/9 "2008-12-02T02:05:22Z")
its kind of like a lathe but it is a bigger machine and it is all automatic unlike a lathe. but i do know there are some lathes that are not manual ---
**Author:** ![Michael17x](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/michael17x/32/13_2.png) [@Michael17x](https://forums.yoyoexpert.com/u/Michael17x)\ **Post date:** [December 2, 2008, 2:26am UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/10 "2008-12-02T02:26:00Z")
By CNC lathe i meant an automatic one. ;D ---
**Author:** ![Robert2393](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/robert2393/32/7_2.png) [@Robert2393](https://forums.yoyoexpert.com/u/Robert2393)\ **Post date:** [December 4, 2008, 3:21am UTC](https://forums.yoyoexpert.com/t/custom-yoyo/149/11 "2008-12-04T03:21:47Z")
have you played with it yet how well dose it work if you have.