# cleaning the silicone groove

**URL:** https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286
**Category:** Yo-Yo Mods and Maintenance
**Created:** [July 22, 2011, 6:21pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286 "2011-07-22T18:21:02Z")
**Posts on this page:** 13
**Page:** 1

<div class="post-metadata">

### Author: ![swagyoyo](https://avatars.discourse-cdn.com/v4/letter/s/f07891/32.png) [@swagyoyo](https://forums.yoyoexpert.com/u/swagyoyo)
#### Post date: [July 22, 2011, 6:21pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/1 "2011-07-22T18:21:02Z")

</div>

I realized that super gluing a silicone o ring isn’t a good idea when after i took it out to put flowable silicone that the silicone kept falling out… how do you clean up superglue without hurting a the plastic??

---

<div class="post-metadata">

### Author: ![Schnayke](https://avatars.discourse-cdn.com/v4/letter/s/f14d63/32.png) [@Schnayke](https://forums.yoyoexpert.com/u/Schnayke)
#### Post date: [July 22, 2011, 6:22pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/2 "2011-07-22T18:22:40Z")

</div>

I would just chip it out of there, a scratched up serface would hold the silicone better anyhow.  
You will not have a perfect yoyo after that, but then again you don’t now.

---

<div class="post-metadata">

### Author: ![AlexanderIsupov](https://avatars.discourse-cdn.com/v4/letter/a/a4c791/32.png) [@AlexanderIsupov](https://forums.yoyoexpert.com/u/AlexanderIsupov)
#### Post date: [July 22, 2011, 6:27pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/3 "2011-07-22T18:27:19Z")

</div>

For stuff like this I always use toothpicks ;D  
They are wooden so they can’t heavily scratch surface of the yoyo.

---

<div class="post-metadata">

### Author: ![swagyoyo](https://avatars.discourse-cdn.com/v4/letter/s/f07891/32.png) [@swagyoyo](https://forums.yoyoexpert.com/u/swagyoyo)
#### Post date: [July 22, 2011, 6:28pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/4 "2011-07-22T18:28:16Z")

</div>

i tried my sisters nail polish remover but i realized it was drying out the plastic a whole bunch

---

<div class="post-metadata">

### Author: ![AlexanderIsupov](https://avatars.discourse-cdn.com/v4/letter/a/a4c791/32.png) [@AlexanderIsupov](https://forums.yoyoexpert.com/u/AlexanderIsupov)
#### Post date: [July 22, 2011, 6:30pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/5 "2011-07-22T18:30:59Z")

</div>

Did you try to scratch it from the surface?

---

<div class="post-metadata">

### Author: ![swagyoyo](https://avatars.discourse-cdn.com/v4/letter/s/f07891/32.png) [@swagyoyo](https://forums.yoyoexpert.com/u/swagyoyo)
#### Post date: [July 22, 2011, 6:37pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/6 "2011-07-22T18:37:05Z")

</div>

> [@AlexanderIsupov](#):
>
> Did you try to scratch it from the surface?

First thing I did

---

<div class="post-metadata">

### Author: ![AlexanderIsupov](https://avatars.discourse-cdn.com/v4/letter/a/a4c791/32.png) [@AlexanderIsupov](https://forums.yoyoexpert.com/u/AlexanderIsupov)
#### Post date: [July 22, 2011, 6:43pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/7 "2011-07-22T18:43:11Z")

</div>

In things like this I just spend a lot of time doing it harmless way (scratching from surface) instead of using more extreme options.  
I think scratching it with something sharp will work and will do less harm then some chemicals.

---

<div class="post-metadata">

### Author: ![dynikus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/dynikus/32/812_2.png) [@dynikus](https://forums.yoyoexpert.com/u/dynikus)
#### Post date: [July 22, 2011, 10:19pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/8 "2011-07-22T22:19:29Z")

</div>

[http://answers.yahoo.com/question/index?qid=20100413145859AAeOW5o](http://answers.yahoo.com/question/index?qid=20100413145859AAeOW5o)  
should be the same with a plastic yoyo

---

<div class="post-metadata">

### Author: ![Schnayke](https://avatars.discourse-cdn.com/v4/letter/s/f14d63/32.png) [@Schnayke](https://forums.yoyoexpert.com/u/Schnayke)
#### Post date: [July 22, 2011, 11:22pm UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/9 "2011-07-22T23:22:10Z")

</div>

For real just get in their with a knife and try not to take out much of the material from the yoyo its self.

---

<div class="post-metadata">

### Author: ![skeletonboy333](https://avatars.discourse-cdn.com/v4/letter/s/b2d939/32.png) [@skeletonboy333](https://forums.yoyoexpert.com/u/skeletonboy333)
#### Post date: [July 23, 2011, 3:06am UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/10 "2011-07-23T03:06:52Z")

</div>

I’d get a knife and scrape carefully. Chuck out the big pieces and try to get the rest. Then use rubbing alcohol on the remaining tiny bits.

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [July 28, 2011, 4:07am UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/11 "2011-07-28T04:07:51Z")

</div>

> [@swagyoyo](#):
>
> i tried my sisters nail polish remover but i realized it was drying out the plastic a whole bunch

Not sure if it still does but nail polish remover used to contain acetone. It’s not good for plastics.  
Use rubbing alcohol as previously suggested.

---

<div class="post-metadata">

### Author: ![swagyoyo](https://avatars.discourse-cdn.com/v4/letter/s/f07891/32.png) [@swagyoyo](https://forums.yoyoexpert.com/u/swagyoyo)
#### Post date: [July 28, 2011, 4:21am UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/12 "2011-07-28T04:21:40Z")

</div>

> [@jhb8426](#):
>
> > [@swagyoyo](#):
> >
> > i tried my sisters nail polish remover but i realized it was drying out the plastic a whole bunch
> 
> Not sure if it still does but nail polish remover used to contain acetone. It’s not good for plastics.  
> Use rubbing alcohol as previously suggested.

I almost used rubbing alcohol but used it ace tone nail polish remover :-\ will this eat the plastic?

---

<div class="post-metadata">

### Author: ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)
#### Post date: [July 30, 2011, 4:01am UTC](https://forums.yoyoexpert.com/t/cleaning-the-silicone-groove/28286/13 "2011-07-30T04:01:40Z")

</div>

Yes - An acetone based nail polish remover can melt the plastic. That’s why people who dye yoyos use it. It softens the plastic so the dye can penetrate.
