# CBC pad?

**URL:** <https://forums.yoyoexpert.com/t/cbc-pad/33619>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [January 8, 2012, 1:50pm UTC](https://forums.yoyoexpert.com/t/cbc-pad/33619 "2012-01-08T13:50:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peaceful](https://avatars.discourse-cdn.com/v4/letter/p/bc79bd/32.png) [@Peaceful](https://forums.yoyoexpert.com/u/Peaceful)\
**Post date:** [January 8, 2012, 1:50pm UTC](https://forums.yoyoexpert.com/t/cbc-pad/33619/1 "2012-01-08T13:50:16Z")

</div>

Would somebody here measure (via caliper, much better with a micrometer) the thickness, Inside Diameter, Outside Diameter of a Large CBC slim pad? Help me guys please! 🙂

---

<div class="post-metadata">

**Author:** ![nobody](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/nobody/32/845_2.png) [@nobody](https://forums.yoyoexpert.com/u/nobody)\
**Post date:** [January 8, 2012, 2:08pm UTC](https://forums.yoyoexpert.com/t/cbc-pad/33619/2 "2012-01-08T14:08:57Z")

</div>

Just a question, but why would you need to know? If it’s for a yoyo we could tell if it would fit, if your making a yoyo or recessing something you can just silicone it.

---

<div class="post-metadata">

**Author:** ![Peaceful](https://avatars.discourse-cdn.com/v4/letter/p/bc79bd/32.png) [@Peaceful](https://forums.yoyoexpert.com/u/Peaceful)\
**Post date:** [January 9, 2012, 12:45pm UTC](https://forums.yoyoexpert.com/t/cbc-pad/33619/3 "2012-01-09T12:45:15Z")

</div>

I don’t have a worn-out pad  
I don’t have a vernier caliper  
and I will make a mold of it.

ugh. 😛

---

<div class="post-metadata">

**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\
**Post date:** [January 9, 2012, 5:24pm UTC](https://forums.yoyoexpert.com/t/cbc-pad/33619/4 "2012-01-09T17:24:56Z")

</div>

> [@Peaceful](#):
>
> I don’t have a worn-out pad  
> I don’t have a vernier caliper  
> and I will make a mold of it.
> 
> ugh. 😛

Pour plaster into the recess and make your positive. Coat it with release material, then pour your polymer or resin to make your negative/master mold. Done.