# CAD Bearing Seat

**URL:** <https://forums.yoyoexpert.com/t/cad-bearing-seat/61788>\
**Category:** Yo-Yo Mods and Maintenance\
**Created:** [December 4, 2013, 10:34pm UTC](https://forums.yoyoexpert.com/t/cad-bearing-seat/61788 "2013-12-04T22:34:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![arcuda](https://avatars.discourse-cdn.com/v4/letter/a/5daacb/32.png) [@arcuda](https://forums.yoyoexpert.com/u/arcuda)\
**Post date:** [December 4, 2013, 10:34pm UTC](https://forums.yoyoexpert.com/t/cad-bearing-seat/61788/1 "2013-12-04T22:34:46Z")

</div>

I know this has been asked before, but what are the measurements for a c-sized bearing seat and 19mm pad area? Picture/Blueprint would be nice, but doesn’t really matter. If you have the link to the other thread, please post it.

---

<div class="post-metadata">

**Author:** ![MYNAMEISZen](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MYNAMEISZen](https://forums.yoyoexpert.com/u/MYNAMEISZen)\
**Post date:** [December 5, 2013, 5:01am UTC](https://forums.yoyoexpert.com/t/cad-bearing-seat/61788/2 "2013-12-05T05:01:00Z")

</div>

Idk the measurements off the back of my head but I could do the bearing seat if you would like to send me the file.

---

<div class="post-metadata">

**Author:** ![kyo](https://avatars.discourse-cdn.com/v4/letter/k/df705f/32.png) [@kyo](https://forums.yoyoexpert.com/u/kyo)\
**Post date:** [December 5, 2013, 5:44am UTC](https://forums.yoyoexpert.com/t/cad-bearing-seat/61788/3 "2013-12-05T05:44:44Z")

</div>

calipers are dirt cheap, and exceptionally easy to use… quit being lazy.