# C3 Speedaholic review:UPDATE

**URL:** <https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173>\
**Category:** Yo-Yo Reviews\
**Created:** [September 14, 2013, 9:04am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173 "2013-09-14T09:04:05Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![ILLYS](https://avatars.discourse-cdn.com/v4/letter/i/90ced4/32.png) [@ILLYS](https://forums.yoyoexpert.com/u/ILLYS)\
**Post date:** [September 26, 2013, 7:42am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/21 "2013-09-26T07:42:47Z")

</div>

This or protostar or surge? ???

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [September 26, 2013, 9:12am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/22 "2013-09-26T09:12:57Z")

</div>

> [@ILLYS](#):
>
> This or protostar or surge? ???

That depends on your preference, but this would be the cheapest of the three.

---

<div class="post-metadata">

**Author:** ![ILLYS](https://avatars.discourse-cdn.com/v4/letter/i/90ced4/32.png) [@ILLYS](https://forums.yoyoexpert.com/u/ILLYS)\
**Post date:** [October 1, 2013, 3:07pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/23 "2013-10-01T15:07:48Z")

</div>

But which would play better? The Surge or this?

---

<div class="post-metadata">

**Author:** ![Noonar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/noonar/32/1244_2.png) [@Noonar](https://forums.yoyoexpert.com/u/Noonar)\
**Post date:** [October 1, 2013, 3:14pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/24 "2013-10-01T15:14:51Z")

</div>

> [@ILLYS](#):
>
> But which would play better? The Surge or this?

Preference?

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 5, 2013, 4:12pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/25 "2013-10-05T16:12:50Z")

</div>

UPDATE:  
THE SPEEDAHOLIC WILL WOBBLE IF USED WITH BEARINGS OTHER THAN THE BEARING IT CAME WITH. SOMEONE HELP ME VERIFY THIS.

I have tested it with YYF SPEC, Terrapin X and CT bearings, all which it wobbles when used. Will pop a KK in and see how it works later.

---

<div class="post-metadata">

**Author:** ![mgiroux77](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mgiroux77/32/66801_2.png) [@mgiroux77](https://forums.yoyoexpert.com/u/mgiroux77)\
**Post date:** [October 5, 2013, 4:14pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/26 "2013-10-05T16:14:42Z")

</div>

> [@hebooz](#):
>
> UPDATE:  
> THE SPEEDAHOLIC WILL WOBBLE IF USED WITH BEARINGS OTHER THAN THE BEARING IT CAME WITH. SOMEONE HELP ME VERIFY THIS.
> 
> I have tested it with YYF SPEC, Terrapin X and CT bearings, all which it wobbles when used. Will pop a KK in and see how it works later.

I have used three different bearings all have worked fine. The stock bearing, a KK and a concave 10 Ball. No issues at all. You also want to make sure you line up the halves properly.

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 5, 2013, 4:19pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/27 "2013-10-05T16:19:48Z")

</div>

> [@mgiroux77](#):
>
> I have used three different bearings all have worked fine. The stock bearing, a KK and a concave 10 Ball. No issues at all. You also want to make sure you line up the halves properly.

Really? I own 3, and all wobble like mad when I use any bearing other than the original one. I even brought it back to the store, and Mimi told me it could not be used with other bearings. Will try again later, thanks for the verification.

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 6, 2013, 1:54pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/28 "2013-10-06T13:54:26Z")

</div>

Further testing has been done. I managed to decrease the wobble to a visible vibrating pulse with the CT and Terrapin X. As mgiroux said, KKs work perfectly fine with the speedaholic. Can anyone else help me verify the issue or test other bearings? Thanks.

---

<div class="post-metadata">

**Author:** ![mgiroux77](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/mgiroux77/32/66801_2.png) [@mgiroux77](https://forums.yoyoexpert.com/u/mgiroux77)\
**Post date:** [October 6, 2013, 9:01pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/29 "2013-10-06T21:01:18Z")

</div>

> [@hebooz](#):
>
> Further testing has been done. I managed to decrease the wobble to a visible vibrating pulse with the CT and Terrapin X. As mgiroux said, KKs work perfectly fine with the speedaholic. Can anyone else help me verify the issue or test other bearings? Thanks.

On the sticker that is on the rims between the C3 yoyodesign and Hong Kong there is a triangle. You need to line both sides up for optimal performance. I messed around with mine as well and it plays best this way. Good luck!!

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 6, 2013, 10:16pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/30 "2013-10-06T22:16:10Z")

</div>

> [@mgiroux77](#):
>
> On the sticker that is on the rims between the C3 yoyodesign and Hong Kong there is a triangle. You need to line both sides up for optimal performance. I messed around with mine as well and it plays best this way. Good luck!!

Will do, thanks a lot for the help.

---

<div class="post-metadata">

**Author:** ![Hendy](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@Hendy](https://forums.yoyoexpert.com/u/Hendy)\
**Post date:** [October 14, 2013, 12:23am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/31 "2013-10-14T00:23:16Z")

</div>

In regards to the vibe, I’m quite sure it will wobble with any bearing you but in it unless you fully tighten it. Bearings can influence vibe to a small degree, but the wobble in the Speedaholic is probably due to its not being tight enough. Just experiment with different degrees of tightness until you find the sweet spot.

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 17, 2013, 11:53am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/32 "2013-10-17T11:53:30Z")

</div>

> [@Hendy](#):
>
> In regards to the vibe, I’m quite sure it will wobble with any bearing you but in it unless you fully tighten it. Bearings can influence vibe to a small degree, but the wobble in the Speedaholic is probably due to its not being tight enough. Just experiment with different degrees of tightness until you find the sweet spot.

I have tested it with various settings and tightness, but to no avail. I do know what I am doing with the testing, but there is still visible pulse vibe with the CT/SPEC/Terrapin X. Thanks for your input.

---

<div class="post-metadata">

**Author:** ![Noonar](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/noonar/32/1244_2.png) [@Noonar](https://forums.yoyoexpert.com/u/Noonar)\
**Post date:** [October 18, 2013, 12:46am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/33 "2013-10-18T00:46:27Z")

</div>

Mine vibes a ton only if I tighten it down hard.

If I lightly tighten it, it’s fine…

---

<div class="post-metadata">

**Author:** ![Hendy](https://avatars.discourse-cdn.com/v4/letter/h/3bc359/32.png) [@Hendy](https://forums.yoyoexpert.com/u/Hendy)\
**Post date:** [October 18, 2013, 1:02am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/34 "2013-10-18T01:02:29Z")

</div>

> [@Noonar](#):
>
> Mine vibes a ton only if I tighten it down hard.
> 
> If I lightly tighten it, it’s fine…

Mine’s the complete opposite XD  
It’s got more wobble than the Midnight Request Line unless it’s fully tightened to the max.

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 18, 2013, 11:38am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/35 "2013-10-18T11:38:01Z")

</div>

> [@Hendy](#):
>
> Mine’s the complete opposite XD  
> It’s got more wobble than the Midnight Request Line unless it’s fully tightened to the max.

I have three, two which vibes less when I tighten it full and one which is the opposite of the former.

---

<div class="post-metadata">

**Author:** ![locke9342](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@locke9342](https://forums.yoyoexpert.com/u/locke9342)\
**Post date:** [October 28, 2013, 11:59pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/36 "2013-10-28T23:59:01Z")

</div>

Mine was loud at first then out of no where it was crazy loud like increadibly loud even compared to how it used to be. Any luck taking off the sheilds I think I need to clean the bearing

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [October 31, 2013, 6:44am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/37 "2013-10-31T06:44:04Z")

</div>

> [@locke9342](#):
>
> Mine was loud at first then out of no where it was crazy loud like increadibly loud even compared to how it used to be. Any luck taking off the sheilds I think I need to clean the bearing

The shield was relatively easy to deshield, I’ve deshielded all 3 Speedaholics without any issues.

---

<div class="post-metadata">

**Author:** ![kkmmnn](https://avatars.discourse-cdn.com/v4/letter/k/c57346/32.png) [@kkmmnn](https://forums.yoyoexpert.com/u/kkmmnn)\
**Post date:** [October 31, 2013, 9:03pm UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/38 "2013-10-31T21:03:41Z")

</div>

mine also got EXTREMELY LOUD after doing a gyro flop… threw it like 5 more times and it “clicked” to quiet once again… it’s done this like 2 or 3 times now where it gets extremely loud through play then just quiets itself down

mine didn’t have any string chase whatsoever when it got loud so i figured why bother cleaning it, it just sorted itself out in the long run anyways

---

<div class="post-metadata">

**Author:** ![0y0yy0y0](https://avatars.discourse-cdn.com/v4/letter/0/c4cdca/32.png) [@0y0yy0y0](https://forums.yoyoexpert.com/u/0y0yy0y0)\
**Post date:** [November 3, 2013, 10:38am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/39 "2013-11-03T10:38:02Z")

</div>

I picked up a blue one at GA states and put a spec x ct bearing in it and it works great and I actually find it a lot more quiet than some other plastics like the og one and the northstar. It was a bit noisy out of the box but still not as noisy as some changing the bearing seemed to help but any cleaned and lightly lubed 10 ball flat or spec x ct will probably be your best bet for quiet bearings. As far as the play it is seriously amazing. I was very impressed with the range of tricks this thing can handle for under $15

---

<div class="post-metadata">

**Author:** ![hebooz](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hebooz/32/534_2.png) [@hebooz](https://forums.yoyoexpert.com/u/hebooz)\
**Post date:** [November 3, 2013, 11:01am UTC](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173/40 "2013-11-03T11:01:03Z")

</div>

> [@0y0yy0y0](#):
>
> I picked up a blue one at GA states and put a spec x ct bearing in it and it works great and I actually find it a lot more quiet than some other plastics like the og one and the northstar. It was a bit noisy out of the box but still not as noisy as some changing the bearing seemed to help but any cleaned and lightly lubed 10 ball flat or spec x ct will probably be your best bet for quiet bearings. As far as the play it is seriously amazing. I was very impressed with the range of tricks this thing can handle for under $15

So a CTX bearing works fine huh…I agree with you on the play too, it is awesome. Thanks for the input =)

[Previous page](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173.md?page=1)

[Next page](https://forums.yoyoexpert.com/t/c3-speedaholic-review-update/59173.md?page=3)
