# Buddahs revenge help **URL:** \ **Category:** Yo-Yo Tricks\ **Created:** [March 9, 2011, 3:21am UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510 "2011-03-09T03:21:25Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![SocksWthSandals](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@SocksWthSandals](https://forums.yoyoexpert.com/u/SocksWthSandals)\ **Post date:** [March 9, 2011, 3:21am UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/1 "2011-03-09T03:21:25Z")
So I’m stuck. Sometimes I can get the trick good. But most of the time when I throw the 1.5 mount over and attempt to land the yoyo in the middle of my 2 hands the yoyo binds itself. Any help/comments/suggestions? ---
**Author:** ![xaix](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/xaix/32/766_2.png) [@xaix](https://forums.yoyoexpert.com/u/xaix)\ **Post date:** [March 9, 2011, 10:51am UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/2 "2011-03-09T10:51:33Z")
well I think that is the bearing that cause it to bind. I recommend to clean it ---
**Author:** ![rdh2121](https://avatars.discourse-cdn.com/v4/letter/r/e9a140/32.png) [@rdh2121](https://forums.yoyoexpert.com/u/rdh2121)\ **Post date:** [March 9, 2011, 5:54pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/3 "2011-03-09T17:54:13Z")
I agree - it sounds like either your bearing is responsive and needs to be cleaned, or your yoyo response is too snaggy for some reason. What are you throwing, and what response does it have? ---
**Author:** ![SocksWthSandals](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@SocksWthSandals](https://forums.yoyoexpert.com/u/SocksWthSandals)\ **Post date:** [March 9, 2011, 8:19pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/4 "2011-03-09T20:19:36Z")
throwing a northstar with green cbc pads. when i use a center trac the trick works out fine. but when i switch to a 10 ball or a terrapin flat it binds in the middle of tricks. the 10 ball i just cleaned and the terrapin always run dry. when i throw my protostar which has the same green pads and a 10 ball it doesnt bind. which is just blowing my mind ---
**Author:** ![pickle24](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pickle24/32/483_2.png) [@pickle24](https://forums.yoyoexpert.com/u/pickle24)\ **Post date:** [March 10, 2011, 12:07am UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/5 "2011-03-10T00:07:15Z")
> [@SocksWthSandals](#): > > throwing a northstar with green cbc pads. when i use a center trac the trick works out fine. but when i switch to a 10 ball or a terrapin flat it binds in the middle of tricks. the 10 ball i just cleaned and the terrapin always run dry. > > when i throw my protostar which has the same green pads and a 10 ball it doesnt bind. which is just blowing my mind It’s probably because you cleaned your bearing. Generally you need to break it in after you clean it, so if you play with it for a while, it should end up being less responsive. ---
**Author:** ![SocksWthSandals](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@SocksWthSandals](https://forums.yoyoexpert.com/u/SocksWthSandals)\ **Post date:** [March 10, 2011, 2:38am UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/6 "2011-03-10T02:38:51Z")
Yea I guess. Still doesn’t explain the binding with the terrapin bearings. It has to be something with maybe the pads aren’t worn in enough or aomething ---
**Author:** ![pickle24](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pickle24/32/483_2.png) [@pickle24](https://forums.yoyoexpert.com/u/pickle24)\ **Post date:** [March 10, 2011, 3:12pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/7 "2011-03-10T15:12:08Z")
> [@SocksWthSandals](#): > > Yea I guess. Still doesn’t explain the binding with the terrapin bearings. It has to be something with maybe the pads aren’t worn in enough or aomething Maybe it needs to be cleaned. ---
**Author:** ![Buddy\_Jim](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/buddy_jim/32/7920_2.png) [@Buddy\_Jim](https://forums.yoyoexpert.com/u/Buddy_Jim)\ **Post date:** [March 10, 2011, 4:28pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/8 "2011-03-10T16:28:26Z")
you may need to hold your hands a little further apart. If you bearing is a little responsive sliding along the slack string will cause it to bind when you don’t want it to. Just a matter of figuring out how to manipulate your hands so that it doesn’t bind. ---
**Author:** ![legomaster1231](https://avatars.discourse-cdn.com/v4/letter/l/ebca7d/32.png) [@legomaster1231](https://forums.yoyoexpert.com/u/legomaster1231)\ **Post date:** [March 10, 2011, 11:15pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/9 "2011-03-10T23:15:11Z")
i think it might be that you need to clean the bearing ---
**Author:** ![zerrubabbel](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/zerrubabbel/32/592_2.png) [@zerrubabbel](https://forums.yoyoexpert.com/u/zerrubabbel)\ **Post date:** [March 18, 2011, 12:56pm UTC](https://forums.yoyoexpert.com/t/buddahs-revenge-help/24510/10 "2011-03-18T12:56:15Z")
Is it a coinsidence I know a legomiste911?