# Bearings bearings everywhere **URL:** \ **Category:** General Yo-Yo\ **Created:** [June 9, 2024, 2:12pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939 "2024-06-09T14:12:37Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Splizacular](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/splizacular/32/640487_2.png) [@Splizacular](https://forums.yoyoexpert.com/u/Splizacular)\ **Post date:** [June 9, 2024, 2:12pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/1 "2024-06-09T14:12:37Z")
So theres about a gazillion bearings out there and with as inexpensive as it is to swap them out I’ve never given them much thought (nor do i really have any experience to draw from as I’ve only thrown two bearings, yotricks vip and rcs stock concave). What’s your desert island bearing and why do you swear by it? Also, which company has the best stock bearings? ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [June 9, 2024, 2:37pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/2 "2024-06-09T14:37:45Z")
Just buy bulk from Hollywood modern they always work great ---
**Author:** ![Orion22](https://avatars.discourse-cdn.com/v4/letter/o/71e660/32.png) [@Orion22](https://forums.yoyoexpert.com/u/Orion22)\ **Post date:** [June 9, 2024, 2:43pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/3 "2024-06-09T14:43:51Z")
Desert island bearing would be full ceramic for no rust from the salty conditions. Nobody else around to complain about the noise. ---
**Author:** ![Siggy-06](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/siggy-06/32/182279_2.png) [@Siggy-06](https://forums.yoyoexpert.com/u/Siggy-06)\ **Post date:** [June 9, 2024, 2:50pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/4 "2024-06-09T14:50:47Z")
NSK Concave Bearing Platinum, but they’re pricey. G2 Rage, OD 10ball, and most centertrac have been great. ---
**Author:** ![reverend](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/reverend/32/283939_2.png) [@reverend](https://forums.yoyoexpert.com/u/reverend)\ **Post date:** [June 9, 2024, 2:57pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/5 "2024-06-09T14:57:13Z")
Vivace Hybrid Flats are my bearing of choice. HANDS I Put them in 80% of my throws. The other 20% usually come with an NSK Platinum or some other stock concave that works great. bearings are super overlooked imo, I definitely recommend trying a bunch for yourself. AND trying them all in different yo-yos. Different throws want different things. ---
**Author:** ![pyrotechnic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/pyrotechnic/32/689058_2.png) [@pyrotechnic](https://forums.yoyoexpert.com/u/pyrotechnic)\ **Post date:** [June 9, 2024, 2:58pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/6 "2024-06-09T14:58:03Z")
MFD Tasmanian Tornado bearings is what i have in most of my C bearing yoyos ---
**Author:** ![Shwa](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/shwa/32/108351_2.png) [@Shwa](https://forums.yoyoexpert.com/u/Shwa)\ **Post date:** [June 9, 2024, 2:59pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/7 "2024-06-09T14:59:54Z")
NSK DS and more recently, atmos type2. ---
**Author:** ![Yoyomikie](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyomikie/32/593857_2.png) [@Yoyomikie](https://forums.yoyoexpert.com/u/Yoyomikie)\ **Post date:** [June 9, 2024, 3:13pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/8 "2024-06-09T15:13:30Z")
If I had to choose just one bearing for ever. It would be a no brainer. Topyo 5cut. ---
**Author:** ![Yoyomikie](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyomikie/32/593857_2.png) [@Yoyomikie](https://forums.yoyoexpert.com/u/Yoyomikie)\ **Post date:** [June 9, 2024, 3:14pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/9 "2024-06-09T15:14:31Z")
I do also love the vip bearings tho they would be my back up ---
**Author:** ![sedanthrows](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/sedanthrows/32/287830_2.png) [@sedanthrows](https://forums.yoyoexpert.com/u/sedanthrows)\ **Post date:** [June 9, 2024, 3:40pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/10 "2024-06-09T15:40:42Z")
This, in my opinion, is the best. I would also recommend NSK bearings, top notch. ---
**Author:** ![Spamus](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/spamus/32/275382_2.png) [@Spamus](https://forums.yoyoexpert.com/u/Spamus)\ **Post date:** [June 9, 2024, 4:48pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/11 "2024-06-09T16:48:33Z")
I’m not sure what this says about me, but I’ve never changed bearings. With the exception of replacing duds of course. ---
**Author:** ![fradiger](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/fradiger/32/66850_2.png) [@fradiger](https://forums.yoyoexpert.com/u/fradiger)\ **Post date:** [June 9, 2024, 6:08pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/12 "2024-06-09T18:08:40Z")
honestly I just bought a ton in bulk and have a jar of good bearings and a jar of bad bearings, and when the good jar runs dry I clean and test all the bad ones and put them back in the good jar. ---
**Author:** ![GTDropKnot](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/gtdropknot/32/212400_2.png) [@GTDropKnot](https://forums.yoyoexpert.com/u/GTDropKnot)\ **Post date:** [June 9, 2024, 11:50pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/13 "2024-06-09T23:50:22Z")
Just whatever came w the Yoyo is usually fine. Kk for 3a tho is a must. ---
**Author:** ![Albertino](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/albertino/32/302953_2.png) [@Albertino](https://forums.yoyoexpert.com/u/Albertino)\ **Post date:** [June 10, 2024, 7:30am UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/14 "2024-06-10T07:30:33Z")
My favourites are DS Bearing and also the Atmos ones, both smooth as hell! ---
**Author:** ![Jeaves](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jeaves/32/203410_2.png) [@Jeaves](https://forums.yoyoexpert.com/u/Jeaves)\ **Post date:** [June 10, 2024, 9:59am UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/15 "2024-06-10T09:59:07Z")
the nsk ds bearing are the best by quite margin if you like them quiet and smooth if you dont care about noise, any centering bearing is as good as the next ---
**Author:** ![Shapapy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/shapapy/32/141199_2.png) [@Shapapy](https://forums.yoyoexpert.com/u/Shapapy)\ **Post date:** [June 10, 2024, 3:18pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/16 "2024-06-10T15:18:23Z")
I really enjoy One Drop bearings in certain throws, especially organics like the Panorama and Intro where I’m playing more for the feel. For more performance, I usually prefer DS and concaves. NSK and Original Throw are my favorite of what I’ve tried. ---
**Author:** ![YoyoGeezer](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyogeezer/32/755_2.png) [@YoyoGeezer](https://forums.yoyoexpert.com/u/YoyoGeezer)\ **Post date:** [June 10, 2024, 6:56pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/17 "2024-06-10T18:56:53Z")
Do any yo-yo’s not made by Onedrop come with flat bearings? ---
**Author:** ![Shapapy](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/shapapy/32/141199_2.png) [@Shapapy](https://forums.yoyoexpert.com/u/Shapapy)\ **Post date:** [June 10, 2024, 7:39pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/18 "2024-06-10T19:39:28Z")
The only ones I’ve seen recently come stock with flat bearings were Duncans. Butterfly XT has a full C flat bearing and the new Freehand One came with a flat A bearing. ---
**Author:** ![Captrogers](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/captrogers/32/647012_2.png) [@Captrogers](https://forums.yoyoexpert.com/u/Captrogers)\ **Post date:** [June 10, 2024, 7:42pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/19 "2024-06-10T19:42:02Z")
All those silly yyf a mayzing throws often come with silly crusty flats… ---
**Author:** ![hsb](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/hsb/32/193274_2.png) [@hsb](https://forums.yoyoexpert.com/u/hsb)\ **Post date:** [June 10, 2024, 8:31pm UTC](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939/20 "2024-06-10T20:31:44Z")
I _think_ a flat bearing was standard on the Bolt 2. My Capstan '22 shipped with flat and concave D bearings. [Next page](https://forums.yoyoexpert.com/t/bearings-bearings-everywhere/402939.md?page=2)