# Bearing stuck of YYF tool **URL:** \ **Category:** Yo-Yo Mods and Maintenance\ **Created:** [November 22, 2015, 10:20pm UTC](https://forums.yoyoexpert.com/t/bearing-stuck-of-yyf-tool/78059 "2015-11-22T22:20:14Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Connorspears](https://avatars.discourse-cdn.com/v4/letter/c/ecae2f/32.png) [@Connorspears](https://forums.yoyoexpert.com/u/Connorspears)\ **Post date:** [November 22, 2015, 10:20pm UTC](https://forums.yoyoexpert.com/t/bearing-stuck-of-yyf-tool/78059/1 "2015-11-22T22:20:14Z")
My bearing is stuck on the YYF multitool! Ive tried freezing twice, I’ve tried lubing it and pulling, and I’ve tried pliers and even a vice. No luck. Not even budging. Any ideas? ---
**Author:** ![jhb8426](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/jhb8426/32/631_2.png) [@jhb8426](https://forums.yoyoexpert.com/u/jhb8426)\ **Post date:** [November 22, 2015, 11:08pm UTC](https://forums.yoyoexpert.com/t/bearing-stuck-of-yyf-tool/78059/2 "2015-11-22T23:08:52Z")
Use a vice and a center punch. Open the vice enough so that the bearing center race rests on the jaws and the multi-tool hanging below it. Use the center punch and a jammer to LIGHTLY tap the tool post out of the bearing. With luck you won’t break the bearing. > **[Yoyo bearing stuck... on YYF yoyo tool](https://forums.yoyoexpert.com/forums/index.php/topic,80131.0.html)** > > After having my yoyo started making clicking sounds, i found out its probably time to take out the bearing. I was so exited to finally us my yoyo tool. after a lot of screaming i got it off. but now its stuck on my tool… got the plyers out and lubed... > **[Bearing stuck... in bearing removal tool](https://forums.yoyoexpert.com/forums/index.php/topic,79581.0.html)** > > Ironic, huh? I’ve tried basically everything I can think of. Yanking it off with pliers, getting a 1/4" drill bit to pry from the other side, pushing it on a table to try to get it straight, pulling with rubber grips, and emailing YYF. Ideas?... > **[Bearing stuck on Multitool?](https://forums.yoyoexpert.com/forums/index.php/topic,82909.0.html)** > > I have had trouble with it in the past, and I discovered a pretty effective way to get the tool out without damaging the bearing. Stick the bearing back in the yoyo (with the tool still in it), and pull on the Multitool very hard, straight out (not...