# Bearing Sizing

**URL:** <https://forums.yoyoexpert.com/t/bearing-sizing/317596>\
**Category:** General Yo-Yo\
**Created:** [April 1, 2020, 3:36am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596 "2020-04-01T03:36:22Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![suttonjp](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@suttonjp](https://forums.yoyoexpert.com/u/suttonjp)\
**Post date:** [April 1, 2020, 3:36am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/1 "2020-04-01T03:36:22Z")

</div>

Can someone clear up some confusion for me. The way I understand it, bearing sizes are listed in this order: inner diameter (ID) x outer diameter (OD) x width (W). A size C or SPEC bearing from YoYoFactory is listed with the following dimensions .250 x .500 x .187 (or 1/4" x 1/2" x 3/16").  
But, a narrow C or a Half SPEC bearing is shown as .125 x .500 x .187 (or 1/8" x 1/2" x 3/16").

According to YYF dimensions, their narrow C bearing isn’t any narrower, it just as a smaller inner diameter. This, of course, can’t be correct, because it fits on the same axle as a regular C SPEC bearing. Shouldn’t the correct dimensions be .250 x .500 x .094?

---

<div class="post-metadata">

**Author:** ![vegabomb](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/vegabomb/32/199_2.png) [@vegabomb](https://forums.yoyoexpert.com/u/vegabomb)\
**Post date:** [April 1, 2020, 3:56am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/2 "2020-04-01T03:56:40Z")

</div>

I think the half specs are actually a little more than half as thick. Maybe it’s supposed to be .250 x .500 x .125.

---

<div class="post-metadata">

**Author:** ![suttonjp](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@suttonjp](https://forums.yoyoexpert.com/u/suttonjp)\
**Post date:** [April 1, 2020, 4:02am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/3 "2020-04-01T04:02:33Z")

</div>

I was just thinking the same thing myself. I have one in my yoyo at the office I’m going to measure tomorrow, but I just ordered a 5 pack of 1/4 x 1/2 x 1/8 (.125) on Amazon for $8. If they work, I’ll be thrilled. I hate paying $8 for a single bearing.

---

<div class="post-metadata">

**Author:** ![yoyodoc](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyodoc/32/48820_2.png) [@yoyodoc](https://forums.yoyoexpert.com/u/yoyodoc)\
**Post date:** [April 1, 2020, 4:09am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/4 "2020-04-01T04:09:16Z")

</div>

Correct

---

<div class="post-metadata">

**Author:** ![yoyodoc](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyodoc/32/48820_2.png) [@yoyodoc](https://forums.yoyoexpert.com/u/yoyodoc)\
**Post date:** [April 1, 2020, 4:14am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/5 "2020-04-01T04:14:10Z")

</div>

It’s called half spec… but more just to differentiate it from the full spec.

Calling it half spec was just a convenient way to identify it.

It is not ‘half’ the width.

Trust me on this\>\>\> if it was actually ‘half’ .094; it would be hard to handle. And… that is why it is .125 and not .094.

---

<div class="post-metadata">

**Author:** ![suttonjp](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@suttonjp](https://forums.yoyoexpert.com/u/suttonjp)\
**Post date:** [April 1, 2020, 4:23am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/6 "2020-04-01T04:23:33Z")

</div>

Yep, I understand that and it confirms what I was originally confused by. The size given for the Half SPEC bearing is actually wrong. It’s given as .125 x .500 x .187 when it’s actually .250 x .500 x .125. I thought I must be nuts because everywhere I see dimensions listed for that bearing, it’s the wrong dimensions. Just wanted to make sure I wasn’t crazy.

---

<div class="post-metadata">

**Author:** ![yoyodoc](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyodoc/32/48820_2.png) [@yoyodoc](https://forums.yoyoexpert.com/u/yoyodoc)\
**Post date:** [April 1, 2020, 4:29am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/7 "2020-04-01T04:29:40Z")

</div>

No, no, no… Don’t jump to the wrong conclusion.

There is a very very good chance that you ‘are’ crazy.

But that has nothing to do with questioning bearing measurements.

---

<div class="post-metadata">

**Author:** ![BTK](https://avatars.discourse-cdn.com/v4/letter/b/ce73a5/32.png) [@BTK](https://forums.yoyoexpert.com/u/BTK)\
**Post date:** [April 1, 2020, 11:18am UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/8 "2020-04-01T11:18:07Z")

</div>

That was funny.

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 1, 2020, 2:47pm UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/9 "2020-04-01T14:47:11Z")

</div>

Yeah, there’s definitely some bad specifications that have been copied and pasted:

Both C bearings have an ID of 1/4" and an OD of 1/2".

The half spec is 1/8" (2/16") wide, the wide C is 3/16" wide.

---

<div class="post-metadata">

**Author:** ![suttonjp](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@suttonjp](https://forums.yoyoexpert.com/u/suttonjp)\
**Post date:** [April 1, 2020, 5:55pm UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/10 "2020-04-01T17:55:27Z")

</div>

That cracked me up. Thanks for the smile.

---

<div class="post-metadata">

**Author:** ![Yoyoer2](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyoer2/32/82855_2.png) [@Yoyoer2](https://forums.yoyoexpert.com/u/Yoyoer2)\
**Post date:** [April 1, 2020, 5:57pm UTC](https://forums.yoyoexpert.com/t/bearing-sizing/317596/11 "2020-04-01T17:57:22Z")

</div>

Huh I don’t really care about the bearing size I only care about the yoyo
