# At Design Zero **URL:** \ **Category:** Yo-Yo Reviews\ **Created:** [August 11, 2023, 1:53pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306 "2023-08-11T13:53:34Z")\ **Posts on this page:** 6\ **Page:** 3
**Author:** ![Marioyo](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/marioyo/32/303068_2.png) [@Marioyo](https://forums.yoyoexpert.com/u/Marioyo)\ **Post date:** [August 14, 2023, 8:30pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/41 "2023-08-14T20:30:33Z")
This thread seems familiar… > [@Moon Rock Bearing Post Issue?](https://forums.yoyoexpert.com/t/moon-rock-bearing-post-issue/369223): > > Hey guys, so I’ve searched and searched, and there is so little information I’ve been able to find about “Moonrock” anodizing. I bought a Few & Far Between Taijitsu in Moonrock white when they dropped. I had it for a few weeks, and it was cutting my string. I took it apart to see if I could figure out what was up, and the bearing post looked ragged. After trying to figure it out, I eventually reached out to Few & Far Between, sent them the pics, and told them what was going on. They replaced th… Finish build-up can absolutely play a vital role in tolerance… ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 14, 2023, 8:30pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/42 "2023-08-14T20:30:52Z")
Thats exactly what I plan to say to them next time we talk. If they vibe, its on me, not them. I’m terested to hear what tolerances you went for. I plan on asking for the post to be 6.345mm. ---
**Author:** ![suspense](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/suspense/32/178499_2.png) [@suspense](https://forums.yoyoexpert.com/u/suspense)\ **Post date:** [August 14, 2023, 10:36pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/43 "2023-08-14T22:36:32Z")
Mine was 6.36 based on what I sent them. I was going for something that didn’t fall out when unscrewing, but had a finger tip tight tolerance, so it doesn’t need a tool to remove - I used a One Drop Rev 1 as a reference point for the bearing post size. ---
**Author:** ![anon5341354](https://avatars.discourse-cdn.com/v4/letter/a/3ab097/32.png) [@anon5341354](https://forums.yoyoexpert.com/u/anon5341354)\ **Post date:** [August 14, 2023, 10:48pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/44 "2023-08-14T22:48:35Z")
> [@suspense](#): > > Mine was 6.36 Well that is surprising. That is actually larger than the inner diameter of a C bearing. ---
**Author:** ![suspense](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/suspense/32/178499_2.png) [@suspense](https://forums.yoyoexpert.com/u/suspense)\ **Post date:** [August 14, 2023, 11:58pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/45 "2023-08-14T23:58:08Z")
I wanted it to be snug, not “loose” to where it falls off when you open the yoyo. I consider this “Finger Tip Tight” rather than the normal press fit, death grip. I tried to take into consideration differences in the bearing tolerances as well as the blast applied to the yoyo. If I’m being 100% honest, it was a complete shot in the dark that worked out for what I wanted. edit: You can hear the bearing “click” into place when I put it back in. It’s very firmly in there, but it’s also easy to remove with my fingers. ---
**Author:** ![system](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/system/32/8054_2.png) [@system](https://forums.yoyoexpert.com/u/system)\ **Post date:** [September 13, 2023, 11:59pm UTC](https://forums.yoyoexpert.com/t/at-design-zero/382306/46 "2023-09-13T23:59:02Z")
Closed on September 13, 2023, 11:59pm UTC This topic was automatically closed 30 days after the last reply. New replies are no longer allowed. [Previous page](https://forums.yoyoexpert.com/t/at-design-zero/382306.md?page=2)