# Almost Finished My First Design, the CADence! **URL:** \ **Category:** General Yo-Yo\ **Created:** [July 10, 2013, 2:41am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304 "2013-07-10T02:41:03Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 2:41am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/1 "2013-07-10T02:41:03Z")
Hey, I’ve for the most part finished my design. I don’t know how I would go about making the axle hole, though. Any feedback or advice? I included the .ems file, so if anyone wants to check out the design, they can. But if you download the .ems file, I have a request. I did the bearing seat and response groove for the most part by just my vision, so if you’ve designed yoyos and have the correct lines for a C-size bearing seat and a response groove for 19mm pads, could you either revise it or email me a .ems file of those? Also, what do you think of the design? I also have a 64g version in CAD. The specs of this design, according to the program: Diameter- 56.420 mm Width- 21.580 mm per half Weight- ~32 grams per half ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/7/f/f/7ff515162226de38c7b2c602865ada7ae632c65f.jpeg) ![](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/6/a/0/6a0812ba36f0f828c53ac53296775b03b8dbf533.jpeg) [Grooveless CADence.ems](https://forums.yoyoexpert.com/uploads/short-url/suQHZNiHBlnmV40nWA62T2maTv6.ems) (16.1 KB) ---
**Author:** ![anonyo](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@anonyo](https://forums.yoyoexpert.com/u/anonyo)\ **Post date:** [July 10, 2013, 3:52am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/2 "2013-07-10T03:52:44Z")
That is amazing. ---
**Author:** ![yoyo143](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yoyo143/32/1384_2.png) [@yoyo143](https://forums.yoyoexpert.com/u/yoyo143)\ **Post date:** [July 10, 2013, 5:00am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/3 "2013-07-10T05:00:28Z")
That looks really nice, keep at it! ---
**Author:** ![MYNAMEISZen](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MYNAMEISZen](https://forums.yoyoexpert.com/u/MYNAMEISZen)\ **Post date:** [July 10, 2013, 5:23am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/4 "2013-07-10T05:23:20Z")
Go to tools then statistics and it will tell you the weight.Overall looks really good but I hope you know it’s going to be around 50mm wide :wink: ---
**Author:** ![TAB](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/tab/32/258909_2.png) [@TAB](https://forums.yoyoexpert.com/u/TAB)\ **Post date:** [July 10, 2013, 5:34am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/5 "2013-07-10T05:34:55Z")
Maybe I’m not looking at the same thing as you guys… but I think you might have designed a spin top by accident. ---
**Author:** ![Big\_cat](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/big_cat/32/877_2.png) [@Big\_cat](https://forums.yoyoexpert.com/u/Big_cat)\ **Post date:** [July 10, 2013, 5:45am UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/6 "2013-07-10T05:45:19Z")
> [@TAB](#): > > Maybe I’m not looking at the same thing as you guys… but I think you might have designed a spin top by accident. It’s only one half of the yoyo. He didn’t show both halves because they are symmetrical. When you add an axle and bearing, then screw the halves together, it becomes a yoyo. ---
**Author:** ![Yoyo\_Kangaroo](https://avatars.discourse-cdn.com/v4/letter/y/e95f7d/32.png) [@Yoyo\_Kangaroo](https://forums.yoyoexpert.com/u/Yoyo_Kangaroo)\ **Post date:** [July 10, 2013, 12:52pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/7 "2013-07-10T12:52:43Z")
The center of gravity won’t be in the center until yo attach the other half, ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 1:07pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/8 "2013-07-10T13:07:33Z")
> [@Yoyo\_Kangaroo](#): > > The center of gravity won’t be in the center until yo attach the other half, That makes sense, haha. But how would I go about putting on a bearing seat/response groove/axle hole? Do I just get the specs and and then cut into the design? ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 2:01pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/9 "2013-07-10T14:01:38Z")
> [@MYNAMEISZen](#): > > Go to tools then statistics and it will tell you the weight. I may be wrong but it looks to heavy. Overall looks really good but I hope you know it’s going to be around 50mm wide :wink: The half actually only weighed 23 grams… I’ve done some revisions for the weight. ---
**Author:** ![dingo54](https://avatars.discourse-cdn.com/v4/letter/d/8baadc/32.png) [@dingo54](https://forums.yoyoexpert.com/u/dingo54)\ **Post date:** [July 10, 2013, 2:15pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/10 "2013-07-10T14:15:58Z")
> [@BenM36](#): > > > [@MYNAMEISZen](#): > > > > Go to tools then statistics and it will tell you the weight. I may be wrong but it looks to heavy. Overall looks really good but I hope you know it’s going to be around 50mm wide :wink: > > The half actually only weighed 23 grams… I’ve done some revisions for the weight. Thats way too light. You will need it at least 60(Total) to get any buyers. ---
**Author:** ![modman10](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/modman10/32/874_2.png) [@modman10](https://forums.yoyoexpert.com/u/modman10)\ **Post date:** [July 10, 2013, 2:48pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/11 "2013-07-10T14:48:33Z")
> [@MYNAMEISZen](#): > > Go to tools then statistics and it will tell you the weight. I may be wrong but it looks to heavy. Overall looks really good but I hope you know it’s going to be around 50mm wide :wink: Listen to this man! He is the king of EMS! ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 6:18pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/12 "2013-07-10T18:18:16Z")
> [@dingo54](#): > > > [@BenM36](#): > > > > > [@MYNAMEISZen](#): > > > > > > Go to tools then statistics and it will tell you the weight. I may be wrong but it looks to heavy. Overall looks really good but I hope you know it’s going to be around 50mm wide :wink: > > > > The half actually only weighed 23 grams… I’ve done some revisions for the weight. > > Thats way too light. You will need it at least 60(Total) to get any buyers. As I stated, I have made revisions and I will post the new version later. The half now weighs 30 grams, and I want to get to 32-33. ---
**Author:** ![Big\_cat](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/big_cat/32/877_2.png) [@Big\_cat](https://forums.yoyoexpert.com/u/Big_cat)\ **Post date:** [July 10, 2013, 6:23pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/13 "2013-07-10T18:23:02Z")
I would be down to buy another ultralight throw. The Pacquiao was awesome. ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 6:25pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/14 "2013-07-10T18:25:43Z")
Anyone know how to make a bearing seat/axle hole/response groove? That’s the only thing I need left now. And to Big cat, I’m shooting for a 64-66 gram throw. ---
**Author:** ![yomagic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yomagic/32/131_2.png) [@yomagic](https://forums.yoyoexpert.com/u/yomagic)\ **Post date:** [July 10, 2013, 7:29pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/15 "2013-07-10T19:29:32Z")
How did you do that to the last picture? ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 10, 2013, 7:36pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/16 "2013-07-10T19:36:41Z")
> [@yomagic](#): > > How did you do that to the last picture? Go to 3D view and then click the gray shapes with a red border at the top (next to the wire pyramid icon) ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 12, 2013, 6:34pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/17 "2013-07-12T18:34:26Z")
Updated ---
**Author:** ![yomagic](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/yomagic/32/131_2.png) [@yomagic](https://forums.yoyoexpert.com/u/yomagic)\ **Post date:** [July 12, 2013, 6:40pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/18 "2013-07-12T18:40:00Z")
Just so you know it’s going to be like 71 grams almost after bearing and axle right? ---
**Author:** ![BenM36](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/benm36/32/646268_2.png) [@BenM36](https://forums.yoyoexpert.com/u/BenM36)\ **Post date:** [July 12, 2013, 6:44pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/19 "2013-07-12T18:44:19Z")
> [@yomagic](#): > > Just so you know it’s going to be like 71 grams almost after bearing and axle right? Oh, yeah, I knew that but didn’t really think about it. I better modify the design a bit :wink: ---
**Author:** ![MYNAMEISZen](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MYNAMEISZen](https://forums.yoyoexpert.com/u/MYNAMEISZen)\ **Post date:** [July 12, 2013, 6:49pm UTC](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304/20 "2013-07-12T18:49:35Z")
> [@yomagic](#): > > Just so you know it’s going to be like 71 grams almost after bearing and axle right? how much do bearing and axle weigh ? [Next page](https://forums.yoyoexpert.com/t/almost-finished-my-first-design-the-cadence/56304.md?page=2)