# About how thin can you make the walls on each type of metal?

**URL:** <https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053>\
**Category:** General Yo-Yo\
**Created:** [April 8, 2019, 2:29pm UTC](https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053 "2019-04-08T14:29:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marm](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/marm/32/46204_2.png) [@Marm](https://forums.yoyoexpert.com/u/Marm)\
**Post date:** [April 8, 2019, 2:29pm UTC](https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053/1 "2019-04-08T14:29:02Z")

</div>

Perhaps wrong catagory, but how thin can you make the walls for each type of aluminum? Such as 6061

---

<div class="post-metadata">

**Author:** ![andy569](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/andy569/32/1256_2.png) [@andy569](https://forums.yoyoexpert.com/u/andy569)\
**Post date:** [April 8, 2019, 3:37pm UTC](https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053/2 "2019-04-08T15:37:09Z")

</div>

6061 - 1.5  
7075 - 1.0  
7068 - .8  
Ti - .5

I’ve seen these guidelines two or 3 times before

---

<div class="post-metadata">

**Author:** ![Marm](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/marm/32/46204_2.png) [@Marm](https://forums.yoyoexpert.com/u/Marm)\
**Post date:** [April 8, 2019, 4:40pm UTC](https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053/3 "2019-04-08T16:40:05Z")

</div>

Thanks

---

<div class="post-metadata">

**Author:** ![MarkD](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/markd/32/40845_2.png) [@MarkD](https://forums.yoyoexpert.com/u/MarkD)\
**Post date:** [April 8, 2019, 7:11pm UTC](https://forums.yoyoexpert.com/t/about-how-thin-can-you-make-the-walls-on-each-type-of-metal/301053/4 "2019-04-08T19:11:40Z")

</div>

Keep in mind that these guidelines depend on where the thin part is and what’s around it. Typically for strength you’d add another 25% on top of those minimum values - you only need to go that thin if you’re going after something extreme in your design.
