# a quesion about my dv888

**URL:** <https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706>\
**Category:** General Yo-Yo\
**Created:** [June 17, 2010, 5:12pm UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706 "2010-06-17T17:12:08Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![sa11297](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@sa11297](https://forums.yoyoexpert.com/u/sa11297)\
**Post date:** [June 20, 2010, 2:44pm UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706/21 "2010-06-20T14:44:17Z")

</div>

> [@Yummy](#):
>
> Aside from spinning it with a drill, just putting it in a yo-yo and playing with that yo-yo is the best way to break the bearing in.

yeah, i wouldnt use a drill

---

<div class="post-metadata">

**Author:** ![saintsfan02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/saintsfan02/32/495_2.png) [@saintsfan02](https://forums.yoyoexpert.com/u/saintsfan02)\
**Post date:** [June 21, 2010, 1:06am UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706/22 "2010-06-21T01:06:11Z")

</div>

yea, i wasnt planning on doing that.

---

<div class="post-metadata">

**Author:** ![x52](https://avatars.discourse-cdn.com/v4/letter/x/3bc359/32.png) [@x52](https://forums.yoyoexpert.com/u/x52)\
**Post date:** [June 21, 2010, 1:19am UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706/23 "2010-06-21T01:19:27Z")

</div>

Are the K-Pads OK? Or maybe it’s a responsive bearing. Like I bought a KK once and put it in a bunch of yoyos to see if it was responsive in each of them, and it was. Also the bearing is long broken in so, and it was never lubed. Played with it stock. I would just use the Yoyofactory SPEC bearing instead of a KK. But it’s up to you.

---

<div class="post-metadata">

**Author:** ![saintsfan02](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.yoyoexpert.com/saintsfan02/32/495_2.png) [@saintsfan02](https://forums.yoyoexpert.com/u/saintsfan02)\
**Post date:** [June 21, 2010, 2:12pm UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706/24 "2010-06-21T14:12:53Z")

</div>

but doent the spec bearing break easily? this is my first yyf yoyo. how long will the spec bearing last?

---

<div class="post-metadata">

**Author:** ![x52](https://avatars.discourse-cdn.com/v4/letter/x/3bc359/32.png) [@x52](https://forums.yoyoexpert.com/u/x52)\
**Post date:** [June 21, 2010, 5:14pm UTC](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706/25 "2010-06-21T17:14:16Z")

</div>

> [@Themaskedyoyoer](#):
>
> but doent the spec bearing break easily? this is my first yyf yoyo. how long will the spec bearing last?

It’s super sturdy. I’m sure it will last longer then your Yoyojam Speed Bearing. They are some of the sturdiest and most well made bearings. It will be more unresponsive with the SPEC unless you need new K-Pads which are marked under Yoyofactory Response under the accessories section in the shop. 🙂

[Previous page](https://forums.yoyoexpert.com/t/a-quesion-about-my-dv888/15706.md?page=1)