# 3d printed axle knot pick attachment

**URL:** https://forums.yoyoexpert.com/t/3d-printed-axle-knot-pick-attachment/442932
**Category:** Yo-Yo Mods and Maintenance
**Created:** [March 25, 2026, 12:40am UTC](https://forums.yoyoexpert.com/t/3d-printed-axle-knot-pick-attachment/442932 "2026-03-25T00:40:54Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![crispbubby](https://avatars.discourse-cdn.com/v4/letter/c/a6a055/32.png) [@crispbubby](https://forums.yoyoexpert.com/u/crispbubby)
#### Post date: [March 25, 2026, 12:40am UTC](https://forums.yoyoexpert.com/t/3d-printed-axle-knot-pick-attachment/442932/1 "2026-03-25T00:40:55Z")

</div>

Hey everyone, I just wanted to share this 3D print I created to get axle knots out. I designed it to attach to the keychain hole of the magicyoyo bearing removal tool, since that’s the one I’ve got.

The one downside is that you can’t get a string on it anymore, but I think it’s pretty convenient to have.

It’s pretty rough since I’m by no means a 3d modeler, but it does its job pretty well. The one concern I have is long-term durability, but it’s probably about 1 cent in filament, so they’re easy to replace.

Heres the link if anyone if interested in printing one: [https://www.tinkercad.com/things/8hs5y8CSWkK-surprising-fulffy](https://www.tinkercad.com/things/8hs5y8CSWkK-surprising-fulffy)

 ![IMG_0262](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/5/a/6/5a6a35f67abbad0d9ef0cff53464c21e2fbbe5cc.jpeg)

 ![IMG_0264](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/e/1/9/e19bdb136d6625da7814b9489490c4c2b196d355.jpeg)

 ![IMG_0266](https://us1.discourse-cdn.com/flex015/uploads/yoyoexpert1/original/4X/4/1/6/416ecf40e8d74bc97284d53e8d6122915f7a0526.jpeg)

I designed the post to be oversized so I could sand it down to be a friction fit.

To attach it, I just stuck the post through and used a soldering iron to melt down the plastic on the other side.