# Yo-Yo Mods and Maintenance **URL:** https://forums.yoyoexpert.com/c/yo-yo-modification-and-maintenance/12.md?no_subcategories=false&page=60 [Latest](https://forums.yoyoexpert.com/latest.md) · [Categories](https://forums.yoyoexpert.com/categories.md) **Page:** 61 --- ## [Valedictor](https://forums.yoyoexpert.com/t/valedictor/73670)
**Author:** [@kadabrium](https://forums.yoyoexpert.com/u/kadabrium)\ **Replies:** 2\ **Last updated:** [March 26, 2015, 7:10pm UTC](https://forums.yoyoexpert.com/t/valedictor/73670 "2015-03-26T19:10:55Z")
did this just to see how much effect the different shapes have on horizontal play when given the same amount of spin. no yoyo was harmed during the process https://i.imgur.com/rCHS0FJ.png(image lar… --- ## [bearings](https://forums.yoyoexpert.com/t/bearings/73665)
**Author:** [@echgiz](https://forums.yoyoexpert.com/u/echgiz)\ **Replies:** 3\ **Last updated:** [March 26, 2015, 1:52pm UTC](https://forums.yoyoexpert.com/t/bearings/73665 "2015-03-26T13:52:16Z")
So I have a just got a code 2 and the bearing immediately went all loud and responsive so I put some lube on it. After playing with it for hours it is still responsive but nearly silent. Should I clean it then try again? … --- ## [Yoyofactory multi-tool Problems](https://forums.yoyoexpert.com/t/yoyofactory-multi-tool-problems/73580)
**Author:** [@Machu](https://forums.yoyoexpert.com/u/Machu)\ **Replies:** 5\ **Last updated:** [March 26, 2015, 3:06am UTC](https://forums.yoyoexpert.com/t/yoyofactory-multi-tool-problems/73580 "2015-03-26T03:06:08Z")
Hey guys, so here’s the deal. I bought a yoyo factory shutter, and I wanted to replace the current bearing with a konkave bearing. As you know, it’s hard to take the bearing off of a shutter without a multi-tool. At the … --- ## [empty post- plz delete](https://forums.yoyoexpert.com/t/empty-post-plz-delete/73633)
**Author:** [@natalemontozzi](https://forums.yoyoexpert.com/u/natalemontozzi)\ **Replies:** 7\ **Last updated:** [March 26, 2015, 2:47am UTC](https://forums.yoyoexpert.com/t/empty-post-plz-delete/73633 "2015-03-26T02:47:21Z")
. --- ## [Strings with pre-tied knots that have same/similar length as Blueprints?](https://forums.yoyoexpert.com/t/strings-with-pre-tied-knots-that-have-same-similar-length-as-blueprints/73642)
**Author:** [@LeDave](https://forums.yoyoexpert.com/u/LeDave)\ **Replies:** 1\ **Last updated:** [March 25, 2015, 5:30pm UTC](https://forums.yoyoexpert.com/t/strings-with-pre-tied-knots-that-have-same-similar-length-as-blueprints/73642 "2015-03-25T17:30:28Z")
Rather than waiting for a specific string to come out, I am trying to broaden the strings I will buy in case one runs out and I can fall back on the other. Anyone know any strings that have pre-tied knots that have the s… --- ## [Best way to remove silver plating from yoyo?](https://forums.yoyoexpert.com/t/best-way-to-remove-silver-plating-from-yoyo/73611)
**Author:** [@LeDave](https://forums.yoyoexpert.com/u/LeDave)\ **Replies:** 8\ **Last updated:** [March 25, 2015, 12:11pm UTC](https://forums.yoyoexpert.com/t/best-way-to-remove-silver-plating-from-yoyo/73611 "2015-03-25T12:11:01Z")
EDIT: Nvm, I am going to keep the silver on, it’s my most expensive yoyo at the moment for a good reason. --- ## [Raiders can't unscrew!](https://forums.yoyoexpert.com/t/raiders-cant-unscrew/73610)
**Author:** [@akka0710](https://forums.yoyoexpert.com/u/akka0710)\ **Replies:** 7\ **Last updated:** [March 25, 2015, 3:39am UTC](https://forums.yoyoexpert.com/t/raiders-cant-unscrew/73610 "2015-03-25T03:39:05Z")
i tried to mod raiders, but I accidentally broke it, there’s a crack near where the axle was, and I tried to hammer it, poke it with a screwdriver, but it didn’t work, I just need the axle, bearing, spacers, and one half… --- ## [YoYoFactory 2010 G5 Resurrected ](https://forums.yoyoexpert.com/t/yoyofactory-2010-g5-resurrected/73555)
**Author:** [@scooter-mcgavin](https://forums.yoyoexpert.com/u/scooter-mcgavin)\ **Replies:** 12\ **Last updated:** [March 25, 2015, 1:48am UTC](https://forums.yoyoexpert.com/t/yoyofactory-2010-g5-resurrected/73555 "2015-03-25T01:48:43Z")
When I got this the string was not looped around the bearing but instead tied in a knot, there were 4 more knots in the once yellow string. Badly banged rims. But what was the worst was the fact it was 30/1000th off, I t… --- ## [logo one drop hubstacks.](https://forums.yoyoexpert.com/t/logo-one-drop-hubstacks/73613)
**Author:** [@JO-YO](https://forums.yoyoexpert.com/u/JO-YO)\ **Replies:** 4\ **Last updated:** [March 24, 2015, 8:38pm UTC](https://forums.yoyoexpert.com/t/logo-one-drop-hubstacks/73613 "2015-03-24T20:38:21Z")
So far this is just an Idea that might work but getting Lego Onedrop side effects and those rotational lego brick used for crains and stuff so at this site. http://shop.lego.com/en-US/Pick-A-Brick-ByTheme?warning=false … --- ## [Remove Axle from Yomega Raider.](https://forums.yoyoexpert.com/t/remove-axle-from-yomega-raider/73544)
**Author:** [@jenck](https://forums.yoyoexpert.com/u/jenck)\ **Replies:** 5\ **Last updated:** [March 23, 2015, 11:16am UTC](https://forums.yoyoexpert.com/t/remove-axle-from-yomega-raider/73544 "2015-03-23T11:16:17Z")
I’m haveing a problem with my raider st when I try to tighten it, the yoyo skips, and it is loose again. I can still thow it, but it is not as responive as I’d like. I would like to figure out it the problem is with th… --- ## [limited space for making strings](https://forums.yoyoexpert.com/t/limited-space-for-making-strings/73579)
**Author:** [@Adhuck](https://forums.yoyoexpert.com/u/Adhuck)\ **Replies:** 1\ **Last updated:** [March 23, 2015, 11:13am UTC](https://forums.yoyoexpert.com/t/limited-space-for-making-strings/73579 "2015-03-23T11:13:39Z")
I would like to try making strings, all the posts I have searched looked like you would need at least 12 feet of space, either floor or ceiling to make the string. Unfortunately I don’t have that much room to work with, … --- ## [AutoCAD Bearing seat?](https://forums.yoyoexpert.com/t/autocad-bearing-seat/73563)
**Author:** [@YOLOcop\_57](https://forums.yoyoexpert.com/u/YOLOcop_57)\ **Replies:** 1\ **Last updated:** [March 22, 2015, 2:39pm UTC](https://forums.yoyoexpert.com/t/autocad-bearing-seat/73563 "2015-03-22T14:39:16Z")
I am making a fully functional 3d printed yoyo for a school project and I don’t know the specifications of the bearing seat, specifically how to stop the inner bearing part so to not have the rotating part rub on the yoy… --- ## [Metal Lathe](https://forums.yoyoexpert.com/t/metal-lathe/73529)
**Author:** [@Pineapple\_Jumpsuit](https://forums.yoyoexpert.com/u/Pineapple_Jumpsuit)\ **Replies:** 10\ **Last updated:** [March 21, 2015, 2:07am UTC](https://forums.yoyoexpert.com/t/metal-lathe/73529 "2015-03-21T02:07:24Z")
Hey, I have been looking to get a metal lathe for modifications, maybe to potentially make my own personal yoyo. Anyways, I will likely get a fair amount of disposable income in the coming months, and I was wondering wh… --- ## [Hand polished CLYW Avalanche ](https://forums.yoyoexpert.com/t/hand-polished-clyw-avalanche/73489)
**Author:** [@scooter-mcgavin](https://forums.yoyoexpert.com/u/scooter-mcgavin)\ **Replies:** 8\ **Last updated:** [March 20, 2015, 3:29pm UTC](https://forums.yoyoexpert.com/t/hand-polished-clyw-avalanche/73489 "2015-03-20T15:29:35Z")
Got bored at work tonight, got this in trade and was already sanded down so i just had to wet sand and polish. --- ## [Help axle stuck in Vk](https://forums.yoyoexpert.com/t/help-axle-stuck-in-vk/73509)
**Author:** [@S3TH](https://forums.yoyoexpert.com/u/S3TH)\ **Replies:** 2\ **Last updated:** [March 19, 2015, 11:28pm UTC](https://forums.yoyoexpert.com/t/help-axle-stuck-in-vk/73509 "2015-03-19T23:28:12Z")
Help my axle is stuck in my vk. So I got this old yoyofactory vk in the mail today and wanted to get the axle out so that I could swap the old bearing out for a new small bearing center track. The axle was positioned s… --- ## [OD flow groove fit Non-ods?](https://forums.yoyoexpert.com/t/od-flow-groove-fit-non-ods/73461)
**Author:** [@Raigo](https://forums.yoyoexpert.com/u/Raigo)\ **Replies:** 3\ **Last updated:** [March 19, 2015, 1:59am UTC](https://forums.yoyoexpert.com/t/od-flow-groove-fit-non-ods/73461 "2015-03-19T01:59:43Z")
Can they fit like standard YYF and stuff? I think i asked before but just to make sure \>.\< --- ## [Bearing stuck on Multitool?](https://forums.yoyoexpert.com/t/bearing-stuck-on-multitool/73466)
**Author:** [@Degil](https://forums.yoyoexpert.com/u/Degil)\ **Replies:** 0\ **Last updated:** [March 18, 2015, 6:18pm UTC](https://forums.yoyoexpert.com/t/bearing-stuck-on-multitool/73466 "2015-03-18T18:18:59Z")
I have had trouble with it in the past, and I discovered a pretty effective way to get the tool out without damaging the bearing. Stick the bearing back in the yoyo (with the tool still in it), and pull on the Multitool … --- ## [Hubstack Afterglow](https://forums.yoyoexpert.com/t/hubstack-afterglow/70415)
**Author:** [@Quise1994](https://forums.yoyoexpert.com/u/Quise1994)\ **Replies:** 8\ **Last updated:** [March 17, 2015, 2:42pm UTC](https://forums.yoyoexpert.com/t/hubstack-afterglow/70415 "2015-03-17T14:42:06Z")
Hey guys not sure if this goes here, never used the forums, but I just got the YYF Hubstack Afterglow and I’ve had it for like a week and for some reason the light on one of the sides doesn’t work anymore. So have any of… --- ## [YYF Response ](https://forums.yoyoexpert.com/t/yyf-response/73397)
**Author:** [@Gym\_Kirk](https://forums.yoyoexpert.com/u/Gym_Kirk)\ **Replies:** 6\ **Last updated:** [March 17, 2015, 2:39pm UTC](https://forums.yoyoexpert.com/t/yyf-response/73397 "2015-03-17T14:39:39Z")
I haven’t been happy with the response in my Shu-Ta and Horizon. The binds slip, especially when you throw hard. I’m looking to replace them. Any recommendations? Thanks. --- ## [Where to buy yoyo officer response pads or equivalent ](https://forums.yoyoexpert.com/t/where-to-buy-yoyo-officer-response-pads-or-equivalent/73378)
**Author:** [@FLUFFALO](https://forums.yoyoexpert.com/u/FLUFFALO)\ **Replies:** 4\ **Last updated:** [March 16, 2015, 2:32pm UTC](https://forums.yoyoexpert.com/t/where-to-buy-yoyo-officer-response-pads-or-equivalent/73378 "2015-03-16T14:32:53Z")
I have a YYO orbis. I am looking to replace them as they are getting worn out. I liked how the response pads felt when I first got the yoyo. So if i can find the same that comes stock that would be great. However I am wi… --- ## [Different Types of Bearings DO MATTER](https://forums.yoyoexpert.com/t/different-types-of-bearings-do-matter/73304)
**Author:** [@LeDave](https://forums.yoyoexpert.com/u/LeDave)\ **Replies:** 33\ **Last updated:** [March 16, 2015, 4:05am UTC](https://forums.yoyoexpert.com/t/different-types-of-bearings-do-matter/73304 "2015-03-16T04:05:02Z")
I have a 10-Ball, SPEC, Center Trac, Konkave Ceramic, Crucial Grooved, and YYJ Speed. Honestly, I’ve been playing and swapping bearings a lot lately. I find it VERY DIFFICULT to believe that each bearings play minimally … --- ## [What is the best way to lube a non-shielded bearing?](https://forums.yoyoexpert.com/t/what-is-the-best-way-to-lube-a-non-shielded-bearing/73390)
**Author:** [@datyoyoguy](https://forums.yoyoexpert.com/u/datyoyoguy)\ **Replies:** 9\ **Last updated:** [March 15, 2015, 10:19pm UTC](https://forums.yoyoexpert.com/t/what-is-the-best-way-to-lube-a-non-shielded-bearing/73390 "2015-03-15T22:19:01Z")
I like to keep my shields off and the way i have to lube it is to put the shields back on and lube it then take them off again, is there a better way to do this?? --- ## [How to tell when I need new response pads](https://forums.yoyoexpert.com/t/how-to-tell-when-i-need-new-response-pads/73377)
**Author:** [@yoyoben18](https://forums.yoyoexpert.com/u/yoyoben18)\ **Replies:** 4\ **Last updated:** [March 15, 2015, 7:45am UTC](https://forums.yoyoexpert.com/t/how-to-tell-when-i-need-new-response-pads/73377 "2015-03-15T07:45:32Z")
I have been yoyoing for a long time but I can never tell when I need new response. Some of the yoyos that I have been playing forever have the same response as when I got it. Can you tell me a how to tell when I need to … --- ## [Powder Coat](https://forums.yoyoexpert.com/t/powder-coat/73367)
**Author:** [@EricBell](https://forums.yoyoexpert.com/u/EricBell)\ **Replies:** 6\ **Last updated:** [March 15, 2015, 1:20am UTC](https://forums.yoyoexpert.com/t/powder-coat/73367 "2015-03-15T01:20:17Z")
Is it safe to powder coat a yoyo that uses side effects? Like will it mess up the tolerances or anything? --- ## [How Do I Take the BEaring Out of My Mighty Flea?](https://forums.yoyoexpert.com/t/how-do-i-take-the-bearing-out-of-my-mighty-flea/73337)
**Author:** [@N64retro](https://forums.yoyoexpert.com/u/N64retro)\ **Replies:** 3\ **Last updated:** [March 13, 2015, 6:20pm UTC](https://forums.yoyoexpert.com/t/how-do-i-take-the-bearing-out-of-my-mighty-flea/73337 "2015-03-13T18:20:38Z")
Plz halp! ??? --- ## [Yoyo Maintenance After 2 years](https://forums.yoyoexpert.com/t/yoyo-maintenance-after-2-years/73341)
**Author:** [@Scientist17](https://forums.yoyoexpert.com/u/Scientist17)\ **Replies:** 5\ **Last updated:** [March 13, 2015, 1:15pm UTC](https://forums.yoyoexpert.com/t/yoyo-maintenance-after-2-years/73341 "2015-03-13T13:15:29Z")
Hello, So I recently have gotten back into yoyo-ing after 2 years. However, my cascade and halo are much louder now. Should I just clean the bearings with lube or are mineral spirits necessary? Or should I replace them? … --- ## [kuyostar problem](https://forums.yoyoexpert.com/t/kuyostar-problem/70767)
**Author:** [@OracleGlassArts](https://forums.yoyoexpert.com/u/OracleGlassArts)\ **Replies:** 4\ **Last updated:** [March 13, 2015, 10:54am UTC](https://forums.yoyoexpert.com/t/kuyostar-problem/70767 "2015-03-13T10:54:42Z")
Hey everyone, im having an issue with a kuyostar i just got in a trade. both sides spin great when its taken apart, but even if i screw the halves together loose it seizes one side up and makes a high pitch kinda squeal… --- ## [Question Regarding Response](https://forums.yoyoexpert.com/t/question-regarding-response/73306)
**Author:** [@TriangleP](https://forums.yoyoexpert.com/u/TriangleP)\ **Replies:** 4\ **Last updated:** [March 12, 2015, 1:05am UTC](https://forums.yoyoexpert.com/t/question-regarding-response/73306 "2015-03-12T01:05:31Z")
So I’m wondering if it’s possible to remove a yoyo’s response pads and put them back in. I think I could get them out without damaging them at all, but I’m more concerned with them not sticking after putting them back i… --- ## [\[SOLVED\] Unable to remove YYF Shutter w/ Multi Tool](https://forums.yoyoexpert.com/t/solved-unable-to-remove-yyf-shutter-w-multi-tool/73248)
**Author:** [@HavikkTV](https://forums.yoyoexpert.com/u/HavikkTV)\ **Replies:** 15\ **Last updated:** [March 11, 2015, 3:01am UTC](https://forums.yoyoexpert.com/t/solved-unable-to-remove-yyf-shutter-w-multi-tool/73248 "2015-03-11T03:01:28Z")
I am currently unable to remove my YYF Shutter’s bearing using the multi tool or some pliers I have with me. The axle does not have the hole facing out and is in the side that the bearing is on. How can I try to take thi… --- ## [bearing shielded or unshielded?](https://forums.yoyoexpert.com/t/bearing-shielded-or-unshielded/73279)
**Author:** [@Sir\_Bagel](https://forums.yoyoexpert.com/u/Sir_Bagel)\ **Replies:** 12\ **Last updated:** [March 11, 2015, 1:13am UTC](https://forums.yoyoexpert.com/t/bearing-shielded-or-unshielded/73279 "2015-03-11T01:13:36Z")
which is better, bearing shielded or unshielded? [Previous page](https://forums.yoyoexpert.com/c/yo-yo-modification-and-maintenance/12.md?no_subcategories=false&page=59) [Next page](https://forums.yoyoexpert.com/c/yo-yo-modification-and-maintenance/12.md?no_subcategories=false&page=61)